ESP MERCEDES-BENZ SL55AMG 2008 R230 Owner's Manual

Contents
Safety and Security........................... 67
Occupant safety................................... 68
Air bags .......................................... 70
Occupant Classification System ..... 74
Seat belts ....................................... 79
Roll bar ........................................... 83
Children in the vehicle .................... 84
Panic alarm .......................................... 88
Activating ....................................... 88
Deactivating ................................... 88
Driving safety systems ......................... 89
ABS ................................................ 89
BAS ................................................ 91
ESP
®............................................... 91
Electro-hydraulic brake system ...... 94
Anti-theft systems................................ 98
Immobilizer..................................... 98
Anti-theft alarm system .................. 98
Tow-away alarm ........................... 100
Controls in detail............................. 103
Locking and unlocking ....................... 104
SmartKey ..................................... 104
SmartKey with KEYLESS-GO* ...... 108
Checking the batteries in the
SmartKey or SmartKey with
KEYLESS-GO* .............................. 113
Loss of the SmartKey or
SmartKey with KEYLESS-GO* ...... 113
Opening the doors from
the inside ..................................... 113
Opening the trunk ........................ 114
Closing the trunk.......................... 116
Valet locking ................................ 120
Trunk lid emergency release ........ 121
Power closing assist for trunk lid . 121
Automatic central locking ............ 122
Locking and unlocking from
the inside ..................................... 122Seats ................................................. 124
Moving the seats forward and
backward ..................................... 124
Lumbar support ........................... 124
Multicontour backrest*................ 125
Seat heating................................. 126
Seat ventilation* .......................... 128
Memory function ............................... 129
Storing positions into memory ..... 130
Recalling positions from memory. 130
Lighting ............................................. 131
Exterior lamp switch .................... 131
Combination switch ..................... 135
Corner-illuminating front
fog lamps* ................................... 136
Hazard warning flasher ................ 137
Interior lighting ............................ 138
Courtesy lighting .......................... 139
Trunk lamp ................................... 139

9
Product information

Introduction
Product information
Please observe the following in your own
best interest:
We recommend using Genuine
Mercedes-Benz Parts as well as conversion
parts and accessories explicitly approved
by us for your vehicle model.
We have tested these parts to determine
their reliability, safety and special suit-
ability for Mercedes-Benz vehicles.We are unable to make an assessment for
other products and therefore cannot be
held responsible for them, even if in indi-
vidual cases an official approval or authori-
zation by governmental or other agencies
should exist. Use of such parts and acces-
sories could adversely affect the safety,
performance or reliability of your vehicle.
Please do not use them.Genuine Mercedes-Benz Parts as well as
conversion parts and accessories
approved by us are available at any
authorized Mercedes-Benz Center where
you will receive comprehensive informa-
tion, also on permissible technical modifi-
cations, and where proper installation will
be performed.

15 Introduction
Symbols
Symbols
Trademarks:

ESP® is a registered trademark of
DaimlerChrysler.

HomeLink® is a registered trademark
of Prince, a Johnson Controls
Company.
The following symbols are found in this
Operator’s Manual:
* Optional equipment is identified
with an asterisk. Since standard
equipment varies between models,
the descriptions and illustrations
in this manual may differ slightly
from the actual equipment of your
vehicle.
This symbol points to instructions for
you to follow.
A number of these symbols appearing
in succession indicates a multiple-step
procedure.
 page This symbol tells you where to
look for further information on a
topic.
This continuation symbol marks
a warning which is continued on
the next page.
This continuation symbol marks
a procedure which is continued
on the next page.
-> This symbol is used to indicate
cross-references to term defini-
tions.
DisplayWords appearing in the multi-
function display are printed in
the type shown here.
Warning!G
Warning notices draw your attention to haz-
ards that may endanger your health or life,
or the health or life of others.
!Highlights hazards that may result in dam-
age to your vehicle.
iHelpful hints or further information you may
find useful.

19 Introduction
Vehicle data recording
Vehicle data recording
Information regarding electronic
recording devices
(Including notice pursuant to California Code § 9951)
Please note that your vehicle is equipped with devices that can record vehicle systems data and, if equipped with the Tele Aid system,
may transmit some data in certain accidents.
This information helps, for example, to diagnose vehicle systems after a collision and to continuously improve vehicle safety.
DaimlerChrysler may access the information and share it with others

for safety research or vehicle diagnosis purposes

with the consent of the vehicle owner or lessee

in response to an official request by law enforcement or other government agency

for use in dispute resolution involving DaimlerChrysler, its affiliates or sales/service organization and/or

as otherwise required or permitted by law.
Please check the Tele Aid subscription service agreement for details regarding the information that may be recorded or transmitted
via that system.

27 At a glance
Instrument cluster
ItemPage
1Coolant temperature
gauge with:
DCoolant temperature
warning lamp348
2Speedometer with:
LLeft turn signal
indicator lamp57
KRight turn signal
indicator lamp57
;Brake warning lamp,
USA only345
3Brake warning lamp,
Canada only345
vABS/ESP® warning
lamp342
ItemPage
EDistronic* indicator
lamp1 (white) or
distance warning
lamp* (red)
218,
350
3Left multifunction display
with:

Outside temperature
display142

Main odometer143

Stored speed for

Cruise control

Distronic*
214
156,
218
1Vehicles without Distronic*: Warning/indicator
lamp without function. It illuminates when the
ignition is on. It should go out when the engine
is running.
ItemPage
4Reset button for:

Resetting trip odometer141

Resetting individual
settings158

Adjusting instrument
cluster illumination140

32 At a glance
Center console
Lower partItemPage
1Gear selector lever for
automatic transmission172
2Parktronic system*
deactivation switch233
3Exterior rear view mirror
adjustment49
4ABC suspension tuning
button232
5Tow-away alarm switch100
6Retractable hardtop switch204
Roll bar buttons83
ItemPage
7ABC vehicle level control
button230
8ESP® switch93
9Thumbwheel for setting
following distance for
Distronic*226
aDistance warning function*
on/off switch229
bProgram mode selector
switch for automatic
transmission182

38 Getting started
The “Getting started” section provides an
overview of the vehicle’s most basic func-
tions. First-time Mercedes-Benz owners
should pay special attention to the infor-
mation given here.
If you are already familiar with the basic
functions described here, the “Controls in
detail” section will provide you with further
information. The corresponding page
references are located at the end of each
segment.
Unlocking
Unlocking with the SmartKey
SmartKey with remote control
1‹Lock button
2ŠUnlock button for trunk lid
3ŒUnlock button
4ÂPanic button (
page 88)
Press unlock button Πon the
SmartKey.

All turn signal lamps flash once.

An acoustic warning sounds once.

The locking knobs in the doors
move up.

The anti-theft alarm system is
disarmed.

The electro-hydraulic brake system
is activated.
Warning!G
When leaving the vehicle, always remove the
SmartKey from the starter switch, take it
with you, and lock the vehicle. Do not leave
children unattended in the vehicle, or with
access to an unlocked vehicle. A child’s
unsupervised access to a vehicle could
result in an accident and/or serious person-
al injury.

40 Getting started
Unlocking
Enter the vehicle.
Opening a door causes its window to open
slightly. It will fully close when the door is
shut.
For more information, see “SmartKey with
KEYLESS-GO*” (
page 108).
Starter switch positions
SmartKey
Starter switch
0For removing SmartKey
1Power supply for some electrical
consumers, such as seat adjustment
2Ignition (power supply for all electrical
consumers) and driving position
All lamps (except high beam headlamp
indicator lamp and turn signal indicator
lamps unless activated) in the instru-
ment cluster come on. If a lamp in the
instrument cluster fails to come on
when the ignition is switched on, have
it checked and replaced if necessary.
If a lamp in the instrument cluster
remains on after starting the engine or
comes on while driving, refer to “Lamps
in the instrument cluster”
(
page 342).
3Starting position
!A side window will not work if it is blocked
with ice or if the battery needs charging. If you
cannot shut a door, do not force it or you could
damage the door or the side window.
Fix whatever is affecting the window before
trying to shut the door.
Warning!G
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
from the starter switch, take it with you, and
lock the vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle. A child’s unsupervised ac-
cess to a vehicle could result in an accident
and/or serious personal injury.
iWhen you switch on the ignition, the indica-
tor and warning lamps (except high beam head-
lamp indicator lamp and turn signal indicator
lamps unless activated) in the instrument cluster
come on. The indicator and warning lamps
(except high beam headlamp indicator lamp and
turn signal indicator lamps if activated) should go
out when the engine is running. This indicates
that the respective systems are operational.


41 Getting started
Unlocking
For more information, see “SmartKey”
(
page 104).
For information on starting the engine
using the SmartKey, see “Starting with the
SmartKey” (
page 53).SmartKey with KEYLESS-GO*
I f t h e S m a r t K e y w i t h K E Y L E S S - G O i s i n s i d e
the vehicle, pressing the KEYLESS-GO
start/stop button on the gear selector
lever corresponds to turning the SmartKey
to the various starter switch positions.
KEYLESS-GO start/stop button
1USA only
2Canada only
The SmartKey with KEYLESS-GO must be
located in the vehicle.
Make sure the gear selector lever is set
toP.
Do not depress the brake pedal.Position 0
Before you press the KEYLESS-GO
start/stop button, the vehicle’s on-board
electronics have the status0 (as with
SmartKey removed).
Position 1
Press the KEYLESS-GO start/stop
button once.
This supplies power for some electrical
consumers, such as seat adjustment.
iThe SmartKey can only be removed from the
starter switch with the gear selector lever in
position P.
!If the SmartKey cannot be turned in the
starter switch, the starter battery may not be
sufficiently charged.

Check the starter battery and charge it if
necessary (
page 427).

Get a jump start (page 432).
To prevent accelerated battery discharge or a
completely discharged battery, always remove
the SmartKey from the starter switch when the
engine is not in operation.
iIf you now press the KEYLESS-GO
start/stop button

once again, the ignition (position2) is
switched on

twice, the power supply is again switched off

42 Getting started
Unlocking
Ignition (or Position 2)
Press the KEYLESS-GO start/stop but-
ton twice.
This supplies power for all electrical
consumers.
All lamps (except high beam headlamp
indicator lamp and turn signal indicator
lamps unless activated) in the instru-
ment cluster come on. If a lamp in the
instrument cluster fails to come on
when the ignition is switched on, have
it checked and replaced if necessary.
If a lamp in the instrument cluster
remains on after starting the engine
or comes on while driving, refer to
“Lamps in the instrument cluster”
(
page 342).For more information, see “SmartKey with
KEYLESS-GO*” (
page 108).
For information on starting the engine
using the KEYLESS-GO start/stop button,
see “Starting with KEYLESS-GO*”
(
page 54).
iIf you now press the KEYLESS-GO
start/stop button once, the power supply is
again switched off.
iWhen you switch on the ignition, the indica-
tor and warning lamps (except high beam head-
lamp indicator lamp and turn signal indicator
lamps unless activated) in the instrument cluster
come on. The indicator and warning lamps
(except high beam headlamp indicator lamp and
turn signal indicator lamps if activated) should go
out when the engine is running. This indicates
that the respective systems are operational.