check engine MERCEDES-BENZ SL600 2008 R230 Owner's Manual

Contents
Power windows .................................. 201
Opening and closing the
windows ....................................... 201
Synchronizing power windows ..... 203
Retractable hardtop ........................... 204
Opening and closing the
retractable hardtop ...................... 204
Driving systems ................................. 214
Cruise control............................... 214
Distronic*..................................... 218
Distance warning function*.......... 229
Active Body Control (ABC) ............ 230
Parktronic system*
(Parking assist)............................. 233
Useful features .................................. 238
Storage compartments................. 238
Cup holders .................................. 243
Ashtray ......................................... 244
Cigarette lighter ........................... 244
Load assist in the trunk ................ 245
Power outlet ................................. 246
Floormat* ..................................... 247
Telephone*................................... 247
Tele Aid ........................................ 250
Garage door opener ..................... 257
Operation......................................... 265
The first 1 000 miles (1 500 km)......... 266
Driving instructions............................ 267
Drive sensibly – save fuel ............. 267
Drinking and driving ..................... 267
Pedals .......................................... 267
Power assistance ......................... 268
Brakes .......................................... 268
Driving off .................................... 270
Parking ......................................... 271
Tires ............................................. 271
Hydroplaning ................................ 272
Tire traction.................................. 273
Tire speed rating .......................... 273
Winter driving instructions ........... 274
Standing water ............................. 275
Passenger compartment .............. 276
Driving abroad.............................. 276
Control and operation of
radio transmitters ........................ 276
Catalytic converter ....................... 277
Emission control .......................... 277
Coolant temperature .................... 278At the gas station .............................. 279
Refueling ...................................... 279
Check regularly and before
a long trip..................................... 280
Engine compartment ......................... 282
Hood ............................................ 282
Engine oil ..................................... 283
Transmission fluid level................ 287
Oil level in the ABC system .......... 287
Coolant ........................................ 288
Windshield washer system and
headlamp cleaning system........... 289
Battery ......................................... 290
Tires and wheels................................ 291
Important guidelines .................... 291
Tire care and maintenance........... 292
Direction of rotation..................... 294
Loading the vehicle ...................... 294
Recommended tire inflation
pressure ....................................... 300
Checking tire inflation pressure ... 302
MOExtended system* .................. 312
Tire labeling ................................. 313
Load identification ....................... 317
DOT, Tire Identification Number
(TIN) ............................................. 317

23 At a glance
Exterior view
ItemPage
1Trunk
Opening the trunk114
Closing the trunk116
Spare wheel400
Vehicle tool kit400
2Rear lamps410
3Rear window defroster187
4Fuel filler flap279
Refueling279
Gasoline461
5Doors
Locking and unlocking104
Opening and closing113
Locking/unlocking in an
emergency403
ItemPage
6Exterior rear view mirrors
Adjusting49
Auto-dimming rear view
mirrors185
7Towing434
Installing towing eye bolt436
8Tires and wheels291
Checking tire inflation
pressure302
General information291
Flat tire417
Vehicle tool kit400
9Hood
Opening282
Engine oil283
Coolant288,
463
ItemPage
aHeadlamp cleaning
system185,
289
bFront lamps410
cWindshield wipers58
Wiper blades, replacing415
Wiper blades, cleaning337
dWindshield
Wiping with windshield
washer fluid60
Cleaning337
eRetractable hardtop
Opening/closing204
Wind screen209
Luggage cover210
Sunshade for panorama
roof*213

40 Getting started
Unlocking
Enter the vehicle.
Opening a door causes its window to open
slightly. It will fully close when the door is
shut.
For more information, see “SmartKey with
KEYLESS-GO*” (
page 108).
Starter switch positions
SmartKey
Starter switch
0For removing SmartKey
1Power supply for some electrical
consumers, such as seat adjustment
2Ignition (power supply for all electrical
consumers) and driving position
All lamps (except high beam headlamp
indicator lamp and turn signal indicator
lamps unless activated) in the instru-
ment cluster come on. If a lamp in the
instrument cluster fails to come on
when the ignition is switched on, have
it checked and replaced if necessary.
If a lamp in the instrument cluster
remains on after starting the engine or
comes on while driving, refer to “Lamps
in the instrument cluster”
(
page 342).
3Starting position
!A side window will not work if it is blocked
with ice or if the battery needs charging. If you
cannot shut a door, do not force it or you could
damage the door or the side window.
Fix whatever is affecting the window before
trying to shut the door.
Warning!G
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
from the starter switch, take it with you, and
lock the vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle. A child’s unsupervised ac-
cess to a vehicle could result in an accident
and/or serious personal injury.
iWhen you switch on the ignition, the indica-
tor and warning lamps (except high beam head-
lamp indicator lamp and turn signal indicator
lamps unless activated) in the instrument cluster
come on. The indicator and warning lamps
(except high beam headlamp indicator lamp and
turn signal indicator lamps if activated) should go
out when the engine is running. This indicates
that the respective systems are operational.


41 Getting started
Unlocking
For more information, see “SmartKey”
(
page 104).
For information on starting the engine
using the SmartKey, see “Starting with the
SmartKey” (
page 53).SmartKey with KEYLESS-GO*
I f t h e S m a r t K e y w i t h K E Y L E S S - G O i s i n s i d e
the vehicle, pressing the KEYLESS-GO
start/stop button on the gear selector
lever corresponds to turning the SmartKey
to the various starter switch positions.
KEYLESS-GO start/stop button
1USA only
2Canada only
The SmartKey with KEYLESS-GO must be
located in the vehicle.
Make sure the gear selector lever is set
toP.
Do not depress the brake pedal.Position 0
Before you press the KEYLESS-GO
start/stop button, the vehicle’s on-board
electronics have the status0 (as with
SmartKey removed).
Position 1
Press the KEYLESS-GO start/stop
button once.
This supplies power for some electrical
consumers, such as seat adjustment.
iThe SmartKey can only be removed from the
starter switch with the gear selector lever in
position P.
!If the SmartKey cannot be turned in the
starter switch, the starter battery may not be
sufficiently charged.

Check the starter battery and charge it if
necessary (
page 427).

Get a jump start (page 432).
To prevent accelerated battery discharge or a
completely discharged battery, always remove
the SmartKey from the starter switch when the
engine is not in operation.
iIf you now press the KEYLESS-GO
start/stop button

once again, the ignition (position2) is
switched on

twice, the power supply is again switched off

42 Getting started
Unlocking
Ignition (or Position 2)
Press the KEYLESS-GO start/stop but-
ton twice.
This supplies power for all electrical
consumers.
All lamps (except high beam headlamp
indicator lamp and turn signal indicator
lamps unless activated) in the instru-
ment cluster come on. If a lamp in the
instrument cluster fails to come on
when the ignition is switched on, have
it checked and replaced if necessary.
If a lamp in the instrument cluster
remains on after starting the engine
or comes on while driving, refer to
“Lamps in the instrument cluster”
(
page 342).For more information, see “SmartKey with
KEYLESS-GO*” (
page 108).
For information on starting the engine
using the KEYLESS-GO start/stop button,
see “Starting with KEYLESS-GO*”
(
page 54).
iIf you now press the KEYLESS-GO
start/stop button once, the power supply is
again switched off.
iWhen you switch on the ignition, the indica-
tor and warning lamps (except high beam head-
lamp indicator lamp and turn signal indicator
lamps unless activated) in the instrument cluster
come on. The indicator and warning lamps
(except high beam headlamp indicator lamp and
turn signal indicator lamps if activated) should go
out when the engine is running. This indicates
that the respective systems are operational.

60 Getting started
Driving
Wiping with windshield washer fluid
Press the combination switch in
direction of arrow2 (
page 58) past
the resistance point.
The windshield wipers operate with
washer fluid.
For information on filling up the washer
reservoir, see “Windshield washer system
and headlamp cleaning system”
(
page 289).
Problems while driving
The engine runs erratically and misfires

An ignition cable may be damaged.

The engine electronics may not be
operating properly.

Unburned gasoline may have entered
the catalytic converter and damaged it.
Give very little gas.
Have the problem repaired by an
authorized Mercedes-Benz Center
as soon as possible.The coolant temperature gauge is
above 248°F (120°C)
The coolant is too hot and is no longer
cooling the engine.
Stop the vehicle as soon as possible in
a safe location and turn off the engine.
Allow engine and coolant to cool off.
Check the coolant level and add cool-
ant if necessary (
page 288).
iTo prevent smears on the windshield or
noisy/chattering wiper blades, wipe with wind-
shield washer fluid every now and then even
when it is raining.

84 Safety and Security
Occupant safety
Raising the roll bar
Lift the switch for the retractable hard-
top.
Press and hold button1 until the roll
bar is raised.Lowering the roll bar
Lift the switch for the retractable hard-
top.
If the roll bar was raised manually:
Press and hold button2 until the roll
bar is lowered.
If the roll bar was raised automatically:
Press and hold button1 until you hear
the roll bar lock into place.
Press and hold button2 until the roll
bar is lowered.
Children in the vehicle
If an infant or child is traveling with you in
the vehicle:
Secure the child using an infant or child
restraint appropriate to the age and
size of the child.
Make sure the infant or child is
properly secured at all times while
the vehicle is in motion.
Warning!G
If the roll bar warning lamp in the
instrument cluster does not go out after
starting the engine, flickers, or if it comes on
while driving, the roll bar system is not
operating properly and may not activate in
an accident. At the same time, the message
Raise Roll-over Bar appears in the
multifunction display. In this case, raise the
roll bar manually before continuing to drive.
For safety reasons, drive only with the roll
bar raised until the malfunction has been
repaired. Have your vehicle checked at an
authorized Mercedes-Benz Center.
iIf you have raised the roll bar manually using
the button, the roll bar will automatically be low-
ered and then raised again when you close and
open the retractable hardtop.
Warning!G
Do not leave children unattended in the
vehicle, even if they are secured in a child
restraint system. The children could

injure themselves on parts of the vehicle

be seriously or fatally injured through
excessive exposure to extreme heat or
cold

96 Safety and Security
Driving safety systems
The electro-hydraulic brake system
switches off automatically

approximately 2 minutes after you
turned the SmartKey in the starter
switch to position0 or removed the
SmartKey

approximately 2 minutes after you
pressed the KEYLESS-GO* start/stop
button to turn off the engine or power
supply and opened the driver’s door
(with driver’s door open, the starter
switch is set to position 0, same as
SmartKey removed from starter
switch)

approximately 20 seconds after you
locked the vehicle from outside
iIf the electro-hydraulic brake system is acti-
vated as the brake pedal is first depressed, you
may feel a reduced pedal resistance and longer
pedal travel than normal. When releasing the
pedal, you may also feel the brake pedal pulsate
and you may hear a sound which is caused by the
activation of the electro-hydraulic brake system
pump. This is normal and not an indication of a
malfunction. Pedal travel returns to normal when
you release the brake pedal and the sound soon
ceases.
If you experience the above while driving and the
red brake warning lamp (
page 345) illumi-
nates and/or warning messages appear in the
multifunction display (
page 377), the brake
system is malfunctioning. Follow the instructions
of the warning message(s) and have the brake
system checked immediately.
Warning!G
Have brake pad replacement and other work
on the electro-hydraulic brake system
carried out by qualified technicians only.
Contact an authorized Mercedes-Benz
Center for further information.
The electro-hydraulic brake system must be
deactivated prior to working on the system.
High pressure is intermittently built up in the
system as part of its automatic self-test.
In addition, the system is automatically acti-
vated when the vehicle is unlocked by re-
mote control, when the driver or passenger
door is opened, when the SmartKey in the
starter switch is turned to position1 or the
KEYLESS-GO* start/stop button is pressed
once, when the brake pedal is depressed or
when the parking brake is released. Failure
to deactivate the system prior to mainte-
nance will cause brake pistons to extend
and brake fluid to leak, which may result in
injuries (contusions and acid burns). Extend-
ed brake pistons may also cause injury.

147 Controls in detail
Control system
Menus, submenus and functions
Table continued on next page.
Menu 1Menu 2Menu 3Menu 4Menu 5
Standard displayAMG1AUDIO NAVDistronic*
(page 149)(page 150)(page 153)(page 155)(page 156)
Commands/submenus
Calling up digital
speedometer/Outside
temperatureEngine oil temperatureSelecting radio stationShow route guidance
instructions, current
direction traveledCalling up settings
Calling up maintenance
service indicatorVehicle supply voltageSelecting satellite radio
station
Checking tire inflation
pressureRACETIMEROperating CD player
Checking engine oil
level*Overall analysis
Lap analysis
1AMG vehicles only.

149 Controls in detail
Control system
Standard display menu
1Main odometer
2Outside temperature
3Current gear selector lever position
4Trip odometer
5Automatic transmission program mode
Press button è or ÿ repeatedly
until you see the standard display
menu in the multifunction display.You can modify the standard display menu.
Instead of outside temperature 2, you
can choose the digital speedometer to be
displayed in the left multifunction display
by changing the setting in the
Select
Display
function of the Inst. Cluster
submenu (
page 161).
Press button k or jto select
the functions in the standard display
menu.
The following functions are available:Calling up digital speedometer or out-
side temperature
Press button k or juntil the
digital speedometer or, depending on
the chosen setting, the outside temper-
ature appears in the right multifunction
display.
FunctionPage
Calling up digital speedometer or
outside temperature149
Calling up maintenance service
indicator332
Checking tire inflation pressure302
Checking engine oil level*284
iIf you have selected the digital speedometer
for the standard display (
page 161), select the
outside temperature display here.