service MERCEDES-BENZ SLC 2017 User Guide

HOLD function
General notes The HOLD function can assist the drive rint he
following situations: R
when pulling away, especially on steep slopes R
when maneuvering on steep slopes R
when waiting in traffic
The vehicl eisk ept stationary without the driver
having to depress the brake pedal.
The braking effect is cancele da nd the HOLD
function deactivated when you depress the
accelerator peda ltop ul la way.
Important safety notes
G WARNING
When leaving the vehicle, it can still roll away
despite being braked by the HOLD function if: R
there is am alfunction in the system or in
the voltag es upply.R
the HOLD function has been deactivated by
pressing the accelerator peda lort he brake
pedal, e.g. by av ehicl eo ccupant.R
the electrical system in the engine com-
partment, the battery or the fuse sh ave
been tampere dw ith.R
the battery is disconnected
There is ar isk of an accident.
If you wis htoe xit the vehicle, alway st urn off
the HOLD function and secure the vehicle
against rolling away.
! When Distance Pilot DISTRONIC or the
HOLD function is activated, the vehicle
brakes automatically in certain situations.
To avoi dd amage to the vehicle, deactivate
Distance Pilot DISTRONIC and the HOLD
function in the following or similar situations: R
when towing the vehicle R
in the car wash
Deactivating the HOLD function ( Y
pag e1 48). Activation conditions You can activate the HOLD function if all of the
following conditions are fulfilled: R
the vehicl eiss tationary. R
the engine is running or if it has been auto-
matically switched off by the ECO start/stop
function. R
the driver's door is closed or you rs eat bel ti s
fastened. R
the electric parking brake is released. R
the transmission is in position D , R or N .R
Distance Pilot DISTRONIC is deactivated
Activating the HOLD function X
Make sure that the activation conditions are
met. X
Depress the brake pedal. X
Quickly depress the brake peda lf urther
until C appears in the multifunction display.
The HOLD function is activated. You can
release the brake pedal.
i If depressing the brake peda lt he first time
does not activate the HOLD function, wait
briefly and then try again.
Deactivatin gt he HOLD functionThe HOLD function is deactivated automatically
if: R
you accelerate and the transmission is in
position D or R . R
you shift the transmission to position P .R
you apply the brakes again with ac ertain
amount of pressure until HOLD disappears
from the multifunction display. R
you secure the vehicl eu sing the electric park-
ing brake. R
you activate Distance Pilot DISTRONIC.
i After at ime, the electric parking brake
secure st he vehicl ea nd relieves the service
brake.148
Driving systems
Driving and parking

Service menu Depending on the equipment installed in the
vehicle, you have the following options in the
Serv. menu:R
Calling up display messages ( Y
page 178)R
Restarting the tire pressure loss warning sys-
tem ( Y
page 262)R
Checking the tire pressure electronically
( Y
page 262)R
Calling up the service due date
( Y
page 235)
Settings menu
Introduction Depending on the equipment installed in the
vehicle, in the Sett. menu you have the follow-
ing options: R
Changing the instrumen tc luster settings
( Y
page 172)R
Changing the light settings ( Y
page 172)R
Changing the vehicle settings ( Y
page 173)R
Changing the convenience settings
( Y
page 174)R
Restoring the factory settings ( Y
page 175)
Instrument cluster
Selecting the distance unit The Display Unit Speed-/Odometer: func-
tion allow sy ou to choose whether certain dis-
play sa ppear in kilometers or miles in the mul-
tifunction display. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Instrument Cluster submenu.X
Press v to confirm.X
Press the d or c button to select the
Display Unit Speed-/Odometer function.
The current setting km or miles appears.X
Press the v button to save the setting.
The selected unit of measurement for distance
applie st o:R
the digital speedometer in the Trip menuR
the odometer and trip odometer R
the trip computer R
the current consumption and the range R
navigation instructions in the Navi menuR
cruise control R
Distanc eP ilot DISTRONIC R
ASSYST PLUS service interval display
Selecting permanent display The Permanent Display: function allow sy ou
to choose whether the multifunction display
always shows the outside temperature or the
speed.
The speed display is inverse to the speedome-
ter. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Instrument Cluster submenu.X
Press v to confirm. X
Press the d or c button to select the
Permanent Display: function.
The current setting, Outside Temperature
or Speedometer [km/h] or Speedometer
[mph] ,a ppears. X
To change the setting: press v again.
Lights
Setting the daytime running lights This function is not available in Canada. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Light submenu. X
Press v to confirm. X
Press the d or c button to select the
Daytime Running Lights function.
If the Daytime Running Lights function has
been switched on, the cone of light and the

Display messages
Possible causes/consequences and P Solutions
Servic e Required Do
Not Shift Gears
Visit Dealer You canno tc ha ng et he transmission position due to am alfunction .
Aw arning tone also sounds.
If transmission position D is selected:X
Drive to aq ualified specialist workshop without shifting th et ra ns -
mission from position D .
If transmission position R , N or P is selected:X
Notify aq ualified specialist workshop or breakdown service.
Reversing Not Possi‐
ble Servic e Required You canno ts hift int ot he transmission position R due to am alfunction .
The transmission position s P , N or D continu etobea vailable.
Aw arning tone also sounds. X
Visit aq ualified specialist workshop .
Transmission Mal ‐
function Sto p Am alfunction has occurred in th em echanical transmission compo -
nents.
Aw arning tone also sounds. The gearbox automatically shift stop osi-
tion N . X
Pull ove ra nd stop th ev ehicl es afely as soo nasp ossible, payin g
attention to roa da nd traffic conditions.X
Shift th et ra nsmission to position P .X
Secur et he vehicl ea gainst rollin ga way ( Y
page 131).X
Notify aq ualified specialist workshop or breakdown service.
Sto pV ehicl eL eave
Engine Runnin g Wai t
Transmission Cool‐
ing The transmission has overheated. Pullin ga way can be temporarily
impaire dorn ot possible.X
Pull ove ra nd stop th ev ehicl es afely as soo nasp ossible, payin g
attention to roa da nd traffic conditions. Do no tc ontinue drivin g
under any circumstances. X
Wait until th ed isplay message disappear sb efore pullin ga way.
Auxiliary Batter y
Malfunction The auxiliary battery for th ea utomatic transmission is no longer bein g
charged. X
Visit aq ualified specialist workshop at th en ex to pportunity.X
Unti lt hen, set th et ra nsmission to position P before you switch off
th ee ng ine. X
Befor el eaving th ev ehicle, apply th ee lectric parking brake.

Stowage areas
Stowage spaces
Important safety notes
G WARNING
If object sint he passenger compartmen ta re
stowed incorrectly, they can slide or be
thrown around and hit vehicle occupants. In
addition, cupholders, open stowage spaces
and mobile phone brackets cannot always
retain all object st hey contain. There is ar isk
of injury, particularly in the event of sudden
braking or as udden change in direction.R
Always stow object ssot hat they cannot be
thrown around in such situations. R
Always make sure that object sdon ot pro-
trude from stowage spaces, parcel nets or
stowage nets. R
Close the lockable stowage spaces before
startin gaj ourney.R
Always stow and secure heavy, hard, poin-
ted, sharp-edged, fragile or bulky object si n
the trunk.
Glove box
X
To open: pull handle C and open glove box
flap D .X
To close: fold glove box flap D upwards until
it engages.
The glove box flap contains brackets for coins,
pens, and credit and service cards. The glove box can be locked and unlocked using
the mechanical key. X
To lock: insert the mechanical key into the
lock and turn it to position H .X
To unlock: insert the mechanical key into the
lock and turn it to position G .
Stowage compartment/telephone
compartment under the armrest
X
To open: push button C up and raise arm-
rest D .
The stowage compartmen tc an be locked and
unlocked centrally using the SmartKey
( Y
page 63).
i Depending on the vehicle equipment, aU SB
port and aM edia Interface is installed in the
stowage compartment. AM edia Interface is a
universal interface for mobile audio equip-
ment ,e .g. for an iPod ®
or MP3 Playe r.Stowage areas 217
Stowage and features Z

Cigarett el ighter
G WARNING
You can burn yourself if you touch th eh ot
heating elemen tort he socke toft he cigarette
lighter.
In addition ,f lammable material sc an ignite if:R
th eh ot cigarette lighter fallsR
ac hi ld hold st he hot cigarette lighter to
objects, for example
Ther eisar is koff ir ea nd injury.
Always hold th ec igarette lighter by th ek no b.
Always mak es ure that th ec igarette lighter is
out of reac hofc hi ldren. Never leave children
unsupervised in th ev ehicle.
Your attentio nm ust always be focused on the
traffic conditions. Only use th ec igarette lighter
when road and traffic condition sp ermit.X
Turn th eS ma rtKey to position 2 in th ei gnition
loc k( Y
page 115).X
To open: push th el ower sectio nofc over C .
The ashtray opens. X
Press in cigarette lighter D .
Cigarett el ighter D will pop out automatically
when th eh eating elemen tisr ed-hot.
12 Vs ockets
General notes X
Turn th eS ma rtKey to position 1 in th ei gnition
loc k( Y
page 115).
The sockets can be used for accessorie sw it ha
maximum draw of 18 0W( 15 A). Accessories
include suc hi tems as chargers for mobile
phones. If you use th es ockets for lon gp eriods when the
engin eiss witched off ,t he battery may dis-
charge.
i An emergenc yc ut-out ensure st ha tt he on-
boar dv oltage does no td ro pt oo low. If th eo n-
boar dv oltage is to ol ow, th ep ower to the
sockets is automaticall yc ut .T his ensures
that there is sufficient power to start the
engine.
Socket in th ef ro nt center console X
To open: push th el ower sectio nofc over C .
The stowage compartmen to pens.X
Lif tupt he cover of socket D .
mbrace
General notes You must have al icens ea greement to activate
th em brace service. Mak es ure that your system
is activated and operational. To log in, pres st he

mentioned are not carried out, the system may
not be activated.
If you have questions abou tt he activation, con-
tact one of the following telephone hotlines: R
USA: Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
(1-800-367-6372) or 1-866-990-9007 R
Canada: Customer Service at
1-888-923-8367
General notes An emergency call is dialed automatically if an
air bag or Emergency Tensioning Device is trig-
gered.
i You cannot end an automatically triggered
emergency call yourself.
An emergency call can als obei nitiated man-
ually.
As soon as the emergency call has been initi-
ated, the indicator lamp in the SOS button
flashes. The multifunction display shows the
Connectin gC all message.
The audio outpu tism uted.
Once the connection has been made ,t he Call
Connected message appears in the multifunc-
tion display.
All important informatio nont he emergency is
transmitted, for example: R
current location of the vehicl e( as determined
by the GPS system) R
vehicl ei dentification numberR
informatio nont he severity of the accident
Shortly after the emergency call has been initi-
ated, av oice connection is automatically estab-
lished betwee nt he Customer Assistance Center
and the vehicl eo ccupants.R
If the vehicl eo ccupants respond, the
Mercedes-Benz Customer Assistance Center
attempts to get more informatio nont he
emergency. R
If there is no response from the vehicl eo ccu-
pants, an ambulance is immediately sent to
the vehicle.
If no voice connection can be established to the
Mercedes-Benz Customer Assistance Center,
the system has been unable to initiate an emer-
gency call.
This can occur, for example, if the relevant
mobil ep hone network is not available. The indi- cator lamp in the SOS button flashes continu-
ously.
The Call Failed message appears in the mul-
tifunction display and must be confirmed.
In this case, summon assistance by other
means.
Making an emergency call X
To initiate an emergency call manually:
press cover C briefl ytoo pen.X
Press SOS button D briefly.
The indicator lamp in SOS button D flashes
until the emergency call is concluded. X
Wai tf or av oice connection to the Mercedes-
Benz Customer Assistance Center. X
After the emergency call ,c lose cover C .
i If the mobil ep hone network is unavailable,
mbrace wil ln ot be abl etom ake the emer-
gency call .Ify ou leave the vehicl ei mmedi-
ately after pressing the SOS button, you will
not know whether mbrace placed the emer-
gency call .Int his case, alway ss ummon assis-
tance by other means.
Roadside Assistanc eb uttonFeatures 223
Stowage and features Z

X
Press Roadside Assistance button C .
This initiates ac all to the Mercedes-Benz Cus-
tomer Assistance Center.
The indicator lamp in Roadside Assistance
button C flashes while the call is active. The
multifunction display shows the Connect‐
ing Call message. The audio output is
muted.
If ac onnection can be made, the Call Con‐
nected message appears in the multifunction
display.
If am obile phone networ ka nd GPS reception
are available, the system transfers data to the
Mercedes-Benz Customer Assistance Center,
for example: R
curren tl ocation of the vehicleR
vehicle identification number
i The display of the multimedia system indi-
cates that ac all is active. During the call, you
can change to the navigation menu by press-
ing the NAVI button on COMAND ,f or exam-
ple.
i Voice output is not available.
Av oice connection is established between the
Mercedes-Benz Customer Assistance Center
and the vehicle occupants.
From the remot em alfunction diagnosis, the
Mercedes-Benz Customer Assistance Center
can ascertain the nature of the problem
( Y
page 225).
The Mercedes-Benz Customer Assistance Cen-
ter either sends aq ualified Mercedes-Benz tech-
nician or makes arrangements for your vehicle
to be transported to the nearest authorized
Mercedes-Benz Center.
You may be charged for services such as repair
work and/or towing.
Further details are availabl einy our mbrace
manual.
i The system has not been able to initiate a
Roadside Assistance call, if: R
the indicator lamp for Roadside Assistance
call button C is flashing continuously.R
no voice connection to the Mercedes-Benz
Customer Assistance Center was estab-
lished.
This can occur if the relevant mobile phone
networ kisn ot available, for example.
The Call Failed message appears in the
multifunction display. X
To end ac all: press the v button on the
multifunction steerin gw heel.
or X
Press the corresponding multimedia system
button for ending ap hone call.
MB Info call button X
Press MB Info call button C .
This initiates ac all to the Mercedes-Benz Cus-
tomer Assistance Center.
The indicator lamp in MB Info call button C
flashes while the connection is being made.
The multifunction display shows the Con‐
necting Call message. The audio system is
muted.
If ac onnection can be made, the Call Con‐
nected message appears in the multifunction
display.
If am obile phone networ ka nd GPS reception
are available, the system transfers data to the
Mercedes-Benz Customer Assistance Center,
for example: R
curren tl ocation of the vehicle R
vehicle identification number
i The display of the multimedia system indi-
cates that ac all is active. During the call, you
can change to the navigation menu by press-
ing the NAVI button on COMAND ,f or exam-
ple.
Voice output is not available.
Av oice connection is established between the
Mercedes-Benz Customer Assistance Center
and the vehicle occupants.
You receive information about operating your
vehicle, about the nearest authorized
Mercedes-Benz Center and about other prod-
ucts and services from Mercedes-Benz.224
Features
Stowage and features

USA only: you can find further information on
the mbrace system under "Owners Online" at
http://www.mbusa.com.
i The system has not been able to initiate an
MB Info call, if: R
the indicator lamp in MB Info call button C
is flashing continuously. R
no voice connection to the Mercedes-Benz
Customer Assistance Center was estab-
lished.
This can occur if the relevant mobile phone
network is not available, for example.
The Call Failed message appears in the
multifunction display. X
To end ac all: press the v button on the
multifunction steering wheel.
or X
Press the corresponding multimedia system
button for ending ap hone call.
Call priority When service calls are active, e.g. Roadside
Assistance or MB Info calls, an emergency call
can still be initiated. In this case, an emergency
call will take priority and override all other active
calls.
The indicator lamp of the respective button
flashes until the call is ended.
An emergency call can only be terminated by the
Mercedes-Benz Customer Assistance Center.
All other calls can be ended by pressing: R
the v button on the multifunction steering
wheel R
the corresponding button on the audi os ys-
tem or on COMAND for ending at elephone
call
i When ac all is initiated, the audi os ystem is
muted. The mobile phone is no longer con-
nected to COMAND. However, if you want to
use your mobile phone, do so only when the
vehicle is stationary and in as afe location.
Vehicle Health Check
With the Vehicle Health Check, the Customer
Assistance Center can provide improved sup-
port for problems with your vehicle. During an
existing call, vehicle data is transferred to the
Customer Assistance Center. The customer ser-
vice representative can use the received data to decide what kind of assistance is required .Y ou
are then, for example, guide dtot he nearest
authorized Mercedes-Benz Center or ar ecovery
vehicle is called.
If vehicle data needs to be transferred during an
MB Info call or aR oadside Assistance call, this is
initiated by the Customer Assistance Center.
You will see the Roadside Assistance Con‐
nected message in the COMAND display. If the
vehicle remote malfunction diagnosis can be
started, the Request for vehicle diagno‐
sis received. Start vehicle diagnosis?
message appears in the display. X
Confirm the message with Yes .X
When the Vehicle Diagnosis Please
start ignition message appears, turn the
SmartKey to position 2 in the ignition lock
( Y
page 115). X
When the Please follow the instruc‐
tions received by phone and move
your vehicle to as afe position mes-
sage appears, follow the customer service
representative's instructions.
The message in the displa yd isappears.
If you select Cancel the remote malfunction
diagnosis is canceled completely.
The vehicle operating state check begins. You
will see the Vehicle diagnosis activated
message.
When the diagnosis is completed, the Trans‐
fer vehicle diagnostics data (Voice
connection may be interrupted during
data transfer) message appears. The vehicle
data can now be sent to the Customer Assis-
tance center. X
Press OK to confirm the message.
The voice connection with the Customer
Assistance Center is terminated.
You will see the Vehicle diagnosis:
Transferring data... message.
The vehicle data is sent to the Customer
Assistance Center.
Depending on what the customer service rep-
resentative agreed with you, the voice connec-
tion is re-established after the transfer is com-
plete. If necessary, you will be contacted at a
later time by another means, e.g. by e-mail or
phone.
Another function of the Vehicle Health Check is
the transfer of service data to the Customer
Assistance Center. If as ervice is overdue, theFeatures 225
Stowage and features Z

COMAND displ ay sho ws am essage about var i-
ous special offers at your worksho p.
US Ao nl y: th is informatio nc an also be calle du p
unde r" Owners On lin e" at http://
www.m busa.co m.
Inform atio nont he dat as to re dint he vehicle
( Y
page 27).
Information on Roadsid eA ss istance
( Y
page 24).
Garage door opener
General notes The HomeLink ®
garag ed oor opener integrated
in th er ear-view mirror allows you to operate up
to three differen td oor and gat es ystems.
Use th ei ntegrate dg arag ed oor opener only on
garag ed oor st ha t:R
have safety stop and revers ef eatures andR
meet curren tU .S .f ederal safety standards
Once programed, th ei ntegrate dg arag ed oor
opener in th er ear-view mirror will assum et he
function of th eg arag ed oor system' sr emote
control. Please also read th eo peratin gi nstruc-
tions for th eg arag ed oor system.
When programmin gag arag ed oor opener, park
th ev ehicle outside th eg arage. Do no tr un the
engine while programming.
Certain garag ed oor drives are incompatible
with th ei ntegrate dg arag ed oor opener. If you
have difficult yp rograming th ei ntegrate dg arage
door opener, contac tana uthorized Mercedes-
Ben zC enter.
Alternatively, you can call th ef ollowin gt el e-
phon ea ssistance services:R
USA: Mercedes-Ben zC ustome rA ss istance
Center at 1-800-FOR-MERCedes R
Canada: Custome rS ervic ea t
1-800-387-0100 R
HomeLink ®
hotline 1-800-355-3515 (free of
charge)
Mor ei nformatio nonH omeLink ®
and/or com-
patible product sisa lso availabl eo nl ine at
http://www.homelink.com.
Notes on th ed eclaration of conformity
( Y
page 25).
USA: FCC ID :C B2HMIHL4
Canada: IC: 279B-HMIHL4 Important safety notes
G WARNING
When you operate or program th eg arag ed oor
with th ei ntegrate dg arag ed oor opener, per-
son sint he range of movemen toft he garage
door can become trapped or struc kbyt he
garag ed oor .T her eisar isk of injury.
When usin gt he integrate dg arag ed oor
opener, always mak es ure that nobody is
within th er ange of movemen toft he garage
door.
G WARNING
Combustio ne ngine se mit poisonous exhaust
gases suc hasc arbon monoxide. Inhaling
these exhaust gases leads to poisoning. There
is ar isk of fatal injury. Therefore never leave
th ee ngine runnin gine nclosed spaces with-
out sufficient ventilation.
Programming
Programmin gb uttonsPay attention to th e" Important safety notes"
( Y
page 226).
Garage door remot ec ontrol

G WARNING
If engine oil comes into contact with hot com-
ponents in the engine compartment, it may
ignite. There is ar isk of fire and injury.
Make sure that engine oil is not spilled next to
the filler neck. Let the engine cool dow na nd
thoroughly clea nt he engine oil off the com-
ponents before starting the engine.
H Environmental note
When adding oil ,t ake care not to spil la ny. If
oil enters the soil or waterways, it is harmfu lt o
the environment.
! Only use engine oil sa nd oil filters that have
been approved for vehicles with as ervice sys-
tem. You can obtai nal ist of the engine oils
and oil filters tested and approved in accord-
ance with the Mercedes-Benz Specifications
for Service Products at any Mercedes-Benz
Service center.
Damag etot he engine or exhaust system is
caused by the following: R
using engine oil sa nd oil filters that have not
been specifically approved for the service
system R
replacing engine oil and oil filters after the
interval for replacement specified by the
service system has been exceeded R
using engine oil additives.
! Do not add too much oil .Ift he oil leve li s
above the "max" mark on the dipstick, too
much oil has been added. This can lea dt o
damage to the engine or the catalytic con-
verter. Have excess oil siphoned off.
Example :e ngine oil cap X
Turn cap C counter-clockwise and remove it. X
Add engine oil.
If the oil leve lisatorb elow the MIN mark on
the oil dipstick, add 1.1 US qt (1.0 liter) of
engine oil. X
Replace cap C on the filler neck and turn
clockwise.
Ensure that the cap locks into place securely. X
Check the oil leve la gain with the oil dipstick
( Y
pag e2 32).
Further information on engine oil ( Y
pag e2 86).
Checkin ga nd adding other service
products
Checkin gc oo lan tl evel
G WARNING
Certain components in the engine compart-
ment, such as the engine, radiator and parts
of the exhaust system, can become very hot.
Working in the engine compartment poses a
risk of injury.
Where possible ,l et the engine cool dow na nd
touch only the components described in the
following.
G WARNING
The cooling system is pressurized, particularly
when the motor is warm .Ify ou open the cap,
you coul dbes calded if hot coolant sprays out.
There is ar isk of injury.
Let the engine cool dow nb efore you open the
cap. Wea rg love sa nd eye protection. Slowly
open the cap to relieve pressure.
ExampleEngine compartment 233
Maintenance and care Z