battery MERCEDES-BENZ SLC 2018 User Guide

tion H .S imultaneousl yp ul lt he trunk li dh an -
dle.
The trunk is unlocked. X
Turn the mechanica lk ey back to position G
and remove it. X
Insert the mechanica lk ey into the SmartKey.
Emergenc yr elease fo rt he trunkYo uc an unlock the trunk li df ro mt he insid ew it h
the emergency release button.
X
Press emergency release button C briefly.
The trunk li du nlocks and opens.
The trunk li dc an be unlocke da nd opene dw it h
the trunk li de mergency release when the vehi-
cle is stationar yorw hile driving.
The trunk li de mergency release does not unlock
the trunk li dift he battery is disconnecte do r
discharged.
Trunk li de mergency release light:R
Emergency release button C flashe sf or
30 minute sa ft er the trunk li diso pe nedR
Emergency release button C flashe sf or
60 minute sa fter the trunk li disc losed
Side windows
Important safety notes
G WARNING
Whil eo pe ning the side windows ,b od yp ar ts
could become trapped between the side win-
do wa nd the door frame as the side window
moves .T here is ar is kofi njury.
Make sure tha tn obod yt ouche st he side win-
do wd ur in gt he opening procedure. If some- body become st rapped ,r elease the switch or
pull the switch to close the side windo wa gain .
G WARNING
Whil ec losing the side windows ,b od yp ar ts in
the closing area could become trapped .T here
is ar is kofi njury.
When closing make sure tha tnop ar ts of the
body ar eint he closing area .Ifs omebody
become st rapped ,r elease the switch or press
the switch to open the side windo wa gain .
G WARNING
If children operate the side windows they
could become trapped ,p ar ticularly if the ya re
left unsupervised .T here is ar is kofi njury.
When leaving the vehicle, always take the
SmartKe yw it hy ou and lock the vehicle. Never
leav ec hildren unsupervised in the vehicle.
Side windo wr eversin gf ea tureThe front side windows ar ee quippe dw it ha n
automatic reversing feature. If as olid object
blocks or restricts the upward movement of one
of the front side windows durin gt he closing
process, the side windo wo pe ns agai na ut omat-
ically. During the manua lc losing process, the
side windo wo nl yo pe ns agai na ut omatically
after the corresponding switch is released. How-
ever, the automatic reversing featur eiso nl ya n
ai da nd does not relieve yo uoft he responsibility
of paying attentio nw he nc losing as id ew in dow.
G WARNING
The reversing featur ed oe sn ot react:R
to soft, light and thi no bj ects ,e .g .s mall fin-
gers R
ove rt he last 1/6 in(4 mm) of the closing
movement R
durin gr esetting R
when closing the side windo wa gain man-
uall yi mm ediatel ya ft er automatic reversing
Thi sm eans tha tt he reversing featur ec annot
prevent someone being trapped in these sit-
uations. There is ar is kofi njury.74
Side windows
Openin ga nd closing

Problem
Possible causes/consequences and P Solutions
As ide window cannot be
closed because it is
blocked by objects, e.g.
leaves in the window
guide. X
Remove the objects. X
Close the side window.
As ide window cannot be
closed and you cannot
see the cause. If as ide window is obstructed during closing and reopens again
slightly: X
Immediately after the window blocks, pull the correspondin gs witch
again until the side window has closed.
The side window is closed with increased force.
If as ide window is obstructed again during closing and reopens again
slightly: X
Immediately after the window blocks, pull the correspondin gs witch
again until the side window has closed.
The side window is closed without the automatic reversing feature.
The side windows cannot
be opened or closed
using the convenience
opening/closing fea-
ture. The SmartKey battery is discharged or nearly discharged. X
Check the SmartKey battery ( Y
page 68) and replace it if necessary
( Y
page 68).
Roof
Important safety notes
G WARNING
If you do not fully open/close the soft top, the
soft-top hydraulics depressurize after as hort
time. This causes the soft top to lower unex-
pectedly and may cause you or others to be
trapped. There is ar isk of injury.
Always open or close the soft top completely.
G WARNING
Closing the roof manually is ac omplicated
and technically demanding procedure, which
requires al ot of strength. You or others can
become trapped. There is ar isk of injury.
Only have the soft top closed manually at a
qualified specialist workshop.
! Never sit on the rear shelf or store heavy
object st here. You will otherwise damage the
roof and the rear shelf of your vehicle. ! Do not forget that the weather can change
abruptly. Make certain that the roof is closed
when you leave the vehicle. The vehicle elec-
tronics can be damaged if water enters the
vehicle interior.
! When opening and closing the roof, make
sure that: R
there is sufficient clearance, as the roof
swings upwards. R
there is sufficient clearance behind the
vehicle, as the trunk lid swings backwards
beyond the bumper. R
the trunk is only loaded to below the trunk
partition. R
the trunk partition is not pushed up by the
load. R
the trunk partition is closed. R
the trunk lid is closed. R
the outside temperature is above 5‡
(

This could result in burns in the immediate
vicinit yoft he air vents. There is ar isk of injury.
Reduce the heater output before it becomes
too hot.
The AIRSCARF function warms the head and
neck area of vehicle occupant sw ith warm air.
The warm air flows out of the holes in the head
restraints.
The three red indicator lamps in the button indi-
cate the heating level you have selected. X
Ensure that the SmartKey is in position H in
the ignition lock. X
To switch on: press button C .
Three red indicator lamps in the button light
up. The blower start supa fter ap reheating
phase of seven seconds. X
Press button C repeatedly until the desired
heating level is set. X
To switch off: press button C repeatedly
until all the indicator lamps go out.
i The blower continues runnin gf or seven sec-
onds to cool down the heating elements.
i If the battery voltage is too low, AIRSCARF
may switch off.
Problems with AIRSCARF AIRSCARF has switched off prematurely or will
not switch on. The vehicle's electrical system
voltage is too low because too many electrical
consumer sa re switched on.X
Switch off electrical consumer st hat you do
not need, such as the rear window defroster
or interior lighting. X
Switch on AIRSCARF again. Steering wheel
Important safety notes
G WARNING
You could lose control of your vehicle if you do
the following while driving: R
adjust the driver's seat, head restraint,
steerin gw heel or mirrors R
fasten the seat belt
There is ar isk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirror and fasten your seat belt
before starting the engine.
G WARNING
Children could injure themselves if they
adjust the steerin gw heel. There is ar isk of
injury.
When leaving the vehicle, alway st ake the
SmartKey with you and lock the vehicle. This
also applies to mobile phones if the "Digital
Car Key in smartphone" function is activated
via the Mercedes me connect web app. Never
leave children unsupervised in the vehicle.
The electrically adjustable steerin gw heel can
still be adjusted when there is no SmartKey in
the ignition lock.
Adjusting the steering wheel man-
ually
G WARNING
If the steerin gw heel is unlocked while the
vehicle is in motion ,itc ould change position
unexpectedly. This could cause you to lose
control of the vehicle. There is ar isk of an
accident.
Before starting off, make sure the steering
wheel is locked. Never unlock the steering
wheel while the vehicle is in motion.88
Steering wheel
Seats, steering wheel and mirrors

The daytime runnin gl amps improve the visibility
of your vehicle during the day. To do this, the
daytime runnin gl amps function must be
switched on using the on-board computer
( Y
page 172).
If the engine is runnin ga nd you turn the light
switch to ` or X ,t he manual settings
take precedenc eo ver the daytime running
lamps.
Low-beam headlamps
G WARNING
When the light switch is set to X ,t he low-
beam headlamps may not be switched on
automatically if there is fog, snow or other
causes of poor visibility due to the weather
conditions such as spray. There is ar isk of an
accident.
In such situations, turn the light switch to
X .
Even if the light sensor does not detect that it is
dark, the parking lamps and low-beam head-
lamps switch on when the ignition is switched on
and the light switch is set to the X position.
This is ap articularly useful function in the event
of rain and fog. X
To switch on the low-beam headlamps:
turn the SmartKey to position H in the igni-
tion lock or start the engine. X
Turn the light switch to X .
The green X indicator lamp in the instru-
ment cluster lights up.
Rear fog lamp
The rear fog lamp improves visibility of your
vehicle for the traffic behind in the event of thick
fog. Please take not eoft he country-specific
regulations for the use of rear fog lamps. X
To switch on the rear fog lamp: turn the
SmartKey to position H in the ignition lock or
start the engine. X
Turn the light switch to X or X .X
Press the ^ button.
The yellow ^ indicator lamp in the instru-
ment cluster lights up. X
To switch off the rear fog lamp: press the
^ button.
The yellow ^ indicator lamp in the instru-
ment cluster goes out. Parking lamps
! If the battery charge is very low, the parking
lamps or standin gl amps are automatically
switched off to enable the next engine start.
Always park your vehicle safely and in aw ell lit
area, in accordanc ew ith the relevant legal
stipulations. Avoid using the ` parking
lamps over ap eriod of several hours. If pos-
sible, switch on the right-hand d or left-
hand c standin gl amps.X
To switch on: turn the light switch to ` .
The green ` indicator lamp in the instru-
ment cluster lights up.
Standing lamps Switching on the standin gl amps ensures the
corresponding side of the vehicle is illuminated. X
To switch on the standing lamp s: the
SmartKey is not in the ignition lock or it is in
position

Problems with the rear window defroster Problem
Possible causes/consequences and P Solutions
The indicator lamp on
the l button flashes.
The rear window
defroster has deactiva-
ted prematurely or can-
not be activated. The on-board voltage is too low because too many electrical consum-
ers are switched on. X
Switch off any consumers that are not required, e.g. reading lamps,
interior lighting or the seat heating.
When the battery is sufficiently charged, the rear window defroster
can be activated again.
The roof is open. X
Close the roof.
When the roof is closed, the rear window defroster can be activated
again.
Switching air-recirculation mode
on/off
General notes If you switch on air-recirculation mode, the win-
dows can fog up more quickly, in particular at
low temperatures. Only use air-recirculation
mode briefly to prevent the windows from fog-
ging up.
Activating/deactivating X
Turn the SmartKey to position H in the igni-
tion lock ( Y
page 116).X
To activate: press the r button.
The indicator lamp in the r button lights
up.
i Air-recirculation mode is automatically acti-
vated at high levels of pollution (dual-zone
automatic climate control only) or at high out-
side temperatures. When air-recirculation
mode is activated automatically, the indicator
lamp in the r button is not lit. Outside air
is added after about 30 minutes. X
To deactivate: press the r button.
The indicator lamp in the r button goes
out. i Air-recirculation mode deactivates auto-
matically: R
after approximately five minutes at outside
temperatures below approximately 41 ‡
(5 †) R
after approximately five minutes if cooling
with air dehumidification is deactivated R
after approximately 30 minutes at outside
temperatures above approximately 41 ‡
(5 †) if the "Cooling with air dehumidifica-
tion" function is activated
Switching the residual heat on or off
General notes The residual heat function is only available on
vehicles for Canada.
It is possible to make use of the residual heat of
the engine to continue heating the stationary
vehicle for up to 30 minutes after the engine has
been switched off. The heating time depends on
the set interior temperature.
Activating/deactivating X
Turn the SmartKey to position

i If you activate the residual heat function at
high temperatures, only the ventilation wil lb e
activated. The blower runs at mediu ms peed.X
To deactivate: press the K or V but-
ton.
The indicator lamp in the K or V button
goes out.
Residua lh eat is deactivated automatically:R
after approximately 30 minutes R
when the ignition is switched on R
if the battery voltage drops
Setting the air vents
Important safety notes
G WARNING
Very hot or very cold air can flow from the air
vents. This could resul tinb urns or frostbite in
the immediate vicinity of the air vents. There
is ar isk of injury.
Make sure that all vehicle occupants always
maintain as ufficient distance to the air out-
lets. If necessary ,r edirect the airflow to
another area of the vehicle interior.
G WARNING
When AIRSCARF is switched on, very hot air
can flow from the vents in the head restraints.
This could resul tinb urns in the immediate
vicinity of the air vents. There is ar isk of injury.
Reduce the heater outpu tb efore it becomes
too hot.
In order to ensure the direct flow of fresh air
through the air vents into the vehicle interior,
please observe the following notes: R
keep the air inlet grill eont he hood and in the
engine compartment on the front-passenger
side free of blockages, such as ice, snow or
leaves. R
never cover the air vents or air intake grilles in
the vehicle interior.
i You can move the adjusters for the air vents
verticall yorh orizontally to set the direction of
the airflow. i For optimal climate control in the vehicle,
open the air vents completely and set the
adjusters to the central position.
Setting the center air vents X
To open the center air vents: turn the
adjuster in one of center air vents C counter-
clockwise. X
To close the center air vents: turn the
adjuster in one of center air vents C clock-
wise until it engages.
Setting the side air vents
C
Side window defroster vent
D
Side air vent X
To open as ide air vent: turn the adjuster in
the side air vent D to the left.X
To close as ide air vent: turn the adjuster in
the side air vent D to the right until it
engages.Setting the air vents 113
Climate control Z

Changing lanes If when driving on multilane roads you wish to
change to th eo vertakin gl ane ,D istance Pilot
DISTRONIC support sy ou if:R
you are driving faster than 45 mph (70 km/ h)R
Distance Pilo tD ISTRONI Ci sm ai ntaining the
distance to av ehicl einf rontR
yo us wi tch on the appropriate tur ns ig nalR
Distance Pilo tD ISTRONI Cd oe sn ot currently
detect ad an ge rofc ollision
If these conditions ar ef ul filled ,y ou rv ehicl ei s
accelerated .A cceleratio nw il lbei nterrupte di f
changing lanes take st oo long or if the distance
between your vehicl ea nd the vehicl einf ront
become st oo small.
i When yo uc hange lanes ,D istance Pilot
DISTRONI Cm onitors the left lane (o nl ef t-
hand-driv ev ehicles) or the right lane (o nr ight-
hand-driv ev ehicles).
Stopping
G WARNING
If yo ul eave the vehicl ew he nitiso nl yb ei ng
braked by Distance Pilo tD ISTRONIC, it could
rol la wa yi f:R
there is am al functio nint he system or in
the voltag es upply.R
Distance Pilo tD ISTRONI Ci ss wi tched off
using the cruis ec ontro ll ev er ,e .g .b yav ehi-
cle occupant or fro mo ut side the vehicleR
the electrical system in the engine com-
partment, the battery or the fuses ar et am-
pered with. R
the battery is disconnected R
the vehicl eisa ccelerated ,e .g .b yav ehicle
occupant.
There is ar is kofana ccident.
Before leaving the vehicle, always deactivate
Distance Pilo tD ISTRONI Ca nd secur et he
vehicl ea gain st rolling away.
Furthe ri nformatio nond ea ctivating Distance
Pilo tD ISTRONI C( Y
page 146).
If Distance Pilo tD ISTRONI Cd et ects tha tt he
vehicl einf ront is stopping, it brakes your vehicle
unti litiss tationary. Once your vehicl eiss tationary, it remains sta-
tionar ya nd yo udon ot nee dtod ep ress the
brake.
i After at ime ,t he electri cp ar kin gb rake
secures the vehicl ea nd relieves the service
brake.
i Depending on the specifie dm inimu md is -
tance ,y ou rv ehicl ew il lc ome to as tandstil la t
as uf ficient distance behind the vehicl ei n
front. The specifie dm i nimu md is tance is set
using the contro lont he cruis ec ontro ll ev er.
When Distance Pilo tD ISTRONI Cisa ctivated,
the transmission is shifted automaticall yt o
position ] if: R
the driver's sea tb el tisn ot fastened and the
driver's door is open. R
the engine is switched off ,u nless it is auto-
maticall ys wi tched off by the ECO start/stop
function.
The electri cp ar kin gb rake secures the vehicle
automaticall yifD istance Pilo tD ISTRONI Ci s
activated when the vehicl eiss tationar ya nd:R
as ys tem malfunctio no ccurs.R
the powe rs uppl yisn ot sufficient.
If am al functio no ccurs, the transmission may
also shift to position ] automatically.
Settin gas peedKee pinm in dt ha titm ay take ab rief moment
unti lt he vehicl eh as accelerated or braked to
the spee ds et. X
To adjus tt he se ts peed in 1m ph incre-
ments (1 km/ hi ncrements): briefly press
the cruise control lever up C to the pressure
point for ah igher speed, or down D for a
lower speed.
Every time the cruise control lever is pressed
up or down, the last speed stored is increased
or reduced. X
To adjust th es et speed in 5m ph incre-
ment s( 10 km/h increments): briefly
press the cruise control lever up C past the
pressur ep oint for ah igher speed, or down D
for al ower speed.
Every time the cruise control lever is pressed
up or down, the last speed stored is increased
or reduced.144
Driving systems
Driving and parking

HOLD function
General notes The HOLD function can assist the drive rint he
following situations: R
when pulling away, especially on steep slopes R
when maneuvering on steep slopes R
when waiting in traffic
The vehicl eisk ept stationary without the driver
having to depress the brake pedal.
The braking effect is cancele da nd the HOLD
function deactivated when you depress the
accelerator peda ltop ul la way.
Important safety notes
G WARNING
When leaving the vehicle, it can still roll away
despite being braked by the HOLD function if: R
there is am alfunction in the system or in
the voltag es upply.R
the HOLD function has been deactivated by
pressing the accelerator peda lort he brake
pedal, e.g. by av ehicl eo ccupant.R
the electrical system in the engine com-
partment, the battery or the fuse sh ave
been tampere dw ith.R
the battery is disconnected
There is ar isk of an accident.
If you wis htoe xit the vehicle, alway st urn off
the HOLD function and secure the vehicle
against rolling away.
! When Distance Pilot DISTRONIC or the
HOLD function is activated, the vehicle
brakes automatically in certain situations.
To avoi dd amage to the vehicle, deactivate
Distance Pilot DISTRONIC and the HOLD
function in the following or similar situations: R
when towing the vehicle R
in the car wash
Deactivating the HOLD function ( Y
pag e1 48). Activation conditions You can activate the HOLD function if all of the
following conditions are fulfilled: R
the vehicl eiss tationary. R
the engine is running or if it has been auto-
matically switched off by the ECO start/stop
function. R
the driver's door is closed or you rs eat bel ti s
fastened. R
the electric parking brake is released. R
the transmission is in position [ , ^ or \\ .R
Distance Pilot DISTRONIC is deactivated
Activating the HOLD function X
Make sure that the activation conditions are
met. X
Depress the brake pedal. X
Quickly depress the brake peda lf urther
until C appears in the multifunction display.
The HOLD function is activated. You can
release the brake pedal.
i If depressing the brake peda lt he first time
does not activate the HOLD function, wait
briefly and then try again.
Deactivatin gt he HOLD functionThe HOLD function is deactivated automatically
if: R
you depress the accelerator and the trans-
mission is in position [ or ^ .R
you shift the transmission to position ] .R
you apply the brakes again with ac ertain
amount of pressure until HOLD disappears
from the multifunction display. R
you secure the vehicl eu sing the electric park-
ing brake. R
you activate Distance Pilot DISTRONIC.
i After at ime, the electric parking brake
secure st he vehicl ea nd relieves the service
brake.148
Driving systems
Driving and parking

Display messages
Possible causes/consequences and P Solutions
= See Operator' sM an ‐
ual The battery is no tb ein gc ha rged.
Aw arning tone also sounds.
Possibl ec auses are: R
ad efective alternato rR
at or np oly-V-belt R
am alfunction in th ee lectronics
! Do no tc ontinue driving. The engin ec ou ld otherwise overheat.X
Pull ove ra nd stop th ev ehicl es afely and switch off th ee ng ine, pay-
ing attention to roa da nd traffic conditions.X
Secur et he vehicl ea gainst rollin ga way ( Y
page 131).X
Consult aq ualified specialist workshop .
= Sto pV ehicl eS ee
Operator' sM anual The battery is no longer bein gc ha rged and th ec onditi on of charg ei s
to ol ow.
Aw arning tone also sounds. X
Pull ove ra nd stop th ev ehicl es afely and switch off th ee ng ine, pay-
ing attention to roa da nd traffic conditions.X
Secur et he vehicl ea gainst rollin ga way ( Y
page 131).X
Observ et he instruction sint he = See Operator' sM anual
display message .X
Consult aq ualified specialist workshop .

Display messages
Possible causes/consequences and P Solutions
Onl yS elect Par k
(P) Whe n Vehicl e is
Stationar y The vehicl eism oving .X
Pull ove ra nd stop th ev ehicl es afely as soo nasp ossible, payin g
attention to roa da nd traffic conditions.X
Shift th et ra nsmission to position ] .
Apply Brake to
Select R You hav ea ttempte dtos hift from position [ to position ^ .X
Depress th eb rak ep edal .X
Shift th et ra nsmission to position ^ .
Servic e Required Do
Not Shift Gears
Visit Dealer You canno tc ha ng et he transmission position due to am alfunction .
Aw arning tone also sounds.
If transmission position [ is selected:X
Drive to aq ualified specialist workshop without shifting th et ra ns -
mission from position [ .
If position ^ , \\ or ] is selected:X
Notify aq ualified specialist workshop or breakdown service.
Reversing Not Possi‐
ble Servic e Required You can no longer shift to transmission position ^ due to am alfunc -
tion .
Transmission position s ] , \\ or [ continu etobea vailable.
Aw arning tone also sounds. X
Visit aq ualified specialist workshop .
Transmission Mal ‐
function Sto p Am alfunction has occurred in th em echanical transmission compo -
nents.
Aw arning tone also sounds. The transmission shift sa utomatically to
position \\ . X
Pull ove ra nd stop th ev ehicl es afely as soo nasp ossible, payin g
attention to roa da nd traffic conditions.X
Shift th et ra nsmission to position ] .X
Secur et he vehicl ea gainst rollin ga way ( Y
page 131).X
Notify aq ualified specialist workshop or breakdown service.
Sto pV ehicl eL eave
Engine Runnin g Wai t
Transmission Cool‐
ing The transmission has overheated. Pullin ga way can be temporarily
impaire dorn ot possible.X
Pull ove ra nd stop th ev ehicl es afely as soo nasp ossible, payin g
attention to roa da nd traffic conditions. Do no tc ontinue drivin g
under any circumstances. X
Wait until th ed isplay message disappear sb efore pullin ga way.
Auxiliary Batter y
Malfunction The auxiliary battery for th ea utomatic transmission is no longer bein g
charged. X
Visit aq ualified specialist workshop at th en ex to pportunity.X
Unti lt hen, always shift th et ra nsmission to position ] before you
switch off th ee ng ine.X
Befor el eaving th ev ehicle, apply th ee lectric parking brake.Display messages 19 9
On-boar dc omputer an dd isplays Z