ESP MERCEDES-BENZ SLK-Class 2005 R171 Comand Manual

58 AudioMP3 operationFor example, if the first session contains
data in audio CD format and the second
session contains data in MP3 format,
COMAND will treat the CD as a conven-
tional audio CD.
File structure
When creating a MP3 CD, you can organize
MP3 tracks into folders. A folder can also
contain additional folders.
A CD may have a maximum of 255 folders
in total.
A maximum of 255 tracks are permissible
per folder.
Mathematically a maximum of 65025
tracks would result. However, this amount
is usually not reached since MP3 requires
approx. 1 MB storage per minute recorded.Track names and folder names
When creating an MP3 CD, you can assign
names to the MP3 tracks and folders.
COMAND uses these names in MP3 mode
for the corresponding display.
Please note the following when assigning
folder and track names:

Track and folder names must contain
at least 1 character.

Track names may contain up to fifty
characters. If a name exceeds this
character limit, COMAND will not be
able to display it in full.

Track names must have the extension
“mp3”.

A period must appear between the
track name and the file extension.
Example of a correct track name:
Track1.mp3
In the example, the track name con-
tains six characters, followed by a peri-
od and the file extension “mp3”.
Empty folders or folders containing data
other than MP3 tracks will not be dis-
played by COMAND.

67 Audio
MP3 operation

Repeat track

The COMAND will repeat the current
track until this function is canceled.

Repeat folder

The COMAND will repeat the tracks in
the current folder until this function is
canceled.
The track sequence is the same as the
Normal sequence option.

Track RandomThis option is restricted to the tracks in
the current folder. The tracks are
played in random order.

Folder RandomAll tracks on the CD are played in ran-
dom order.Changing the playback option

In the MP3 main menu (
page 61),
press the
Setting
soft key.
The Settings menu is displayed.
The solid circle indicates which op-
tion is currently selected.

Press or  to select a different
option.

Press.
The option is activated. A correspond-
ing display will appear in the status bar
for all options except
Normal sequence
.
An option will remain activated even if
COMAND is switched OFF and then ON
again.

69 Audio
CD changer* operation

Open the CD changer main menu
(page 74);
or

Load an audio CD into the CD changer.
The CD changer can play audio CDs and is
located in the glove box.Switching to CD changer modeCD changer
Loading CDsWarning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and oper-
ate the audio system only when road, weath-
er and traffic conditions permit.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.!Do not attach labels of any type to the
CD. They may become detached and
damage the drive.
!Your CD drive has been designed to
play CDs which correspond to the IEC
60908 standard. Therefore only CDs
not exceeding a thickness of 1.3 mm
can be used.
If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they cannot be ejected
and will damage the drive.
Do not play single-CDs (80 mm) with an
adapter. Only use 12 cm diameter CDs.

70 AudioCD changer* operationIn order to load CDs, you will need to open
the glove box.
1CD slot
2Magazine compartment buttonsThe CD changer has a built-in magazine
which can hold up to six CDs.
The CD changer has six magazine compart-
ment buttons 2 for controlling the loading
procedure. LEDs in the buttons indicate
the status of the corresponding magazine
compartment.

Button LED OFF:
Magazine compartment empty

Button LED flashes green:
CD changer requesting CD to be load-
ed

Button LED continuously red:
Magazine compartment loaded with a
CDThe status of a magazine compartment can
also be seen when selecting a CD in the CD
Selection menu (
page 76).
The CD slot 1 for loading CDs into the CD
changer is located above the buttons 2.
Loading options:

Loading a single magazine compart-
ment (
page 71)

Loading all six magazine compart-
ments (
page 71)
iThe CD changer may not be able to play
audio CDs with copy protection.

71 Audio
CD changer* operation
Loading a single magazine compart-
ment 
Open the glove box
(Vehicle owner's manual).

Briefly press the button 2 of the emp-
ty magazine compartment to be load-
ed.

Wait until the LED in the button 2
flashes green.
This indicates that the CD changer re-
quests a CD.

Insert an audio CD into the CD slot 1
within approx. 15 seconds. Insert the
CD face up.
The CD is pulled in. The red LED in the
corresponding magazine compartment
button 2 lights up continuously. The
system starts playing the CD.
The loading procedure is completed.
Loading all six magazine compart-
ments
Initial situation: all magazine compart-
ments are empty.
The CD changer loads all magazine com-
partments beginning with compartment 1.

Open the glove box
(Vehicle owner's manual).
1CD slot
2Magazine compartment buttons
iLoading a magazine slot will stop the
playback of a CD in the changer.


72 AudioCD changer* operation
Press and hold the button of an empty
magazine compartment 2 for more
than 2 seconds.
The LEDs of all magazine compartment
buttons 2 briefly light up green sever-
al times.

Wait until the LED in the first magazine
compartment button 2 flashes green.
This indicates that the CD changer re-
quests a CD.

Insert an audio CD into the CD slot 1
within approx. 15 seconds. Insert the
CD face up.
The CD is pulled in; the magazine com-
partment is loaded. The red LED in the corresponding mag-
azine compartment button 2 lights up
continuously.
The CD changer then requests inser-
tion of the next CD. The LED in the cor-
responding magazine compartment
button 2 flashes green.

Repeat the last step until all six maga-
zine compartments are loaded.
The system plays the sixth CD. The
LEDs in all magazine compartment but-
tons 2 light up red continuously.
The loading procedure is completed.
iIf, for example, only compartments 1
through 4 are to be loaded instead of
all six compartments, simply do not in-
sert the a fifth CD into the slot 1. The
CD changer attempts to load the fifth
CD, yet aborts the loading procedure.
The system automatically plays the last
(fourth) CD.

76 AudioCD changer* operation
Use or  to select another CD
from the list.

Wait approx. 3 seconds without chang-
ing the selection.
The CD is changed. The newly selected
CD is played.Selecting via direct entry of the CD
number

Press one of the 3 -  keys.
The CD changer switches to the CD
loaded in the appropriate CD changer
compartment.
Selecting via CD Selection menu

Press the
Magaz.
soft key.
The CD Selection menu appears. You
see the list of all six compartments. An entry shows the CD title if the CD con-
tains corresponding text data.
No text displayed with a CD symbol indi-
cates that the corresponding CD does not
contain any CD text data.
An entry shaded out indicates an empty
CD changer compartment.
iThe system will skip empty CD changer
compartments.
iThe CD fails to be changed if you select
an empty compartment.

81 Audio
CD changer* operation

CD RandomAt least 4 tracks on one CD are played
in random order (e.g. track 5, 7, 3, 9)
before the next CD is played.
The CDs are changed in random
order (e.g. CD 4, 1, 5, etc.).
Changing the playback option

In the CD changer main menu
(page 74) press the
Setting
soft key. The Settings menu is displayed.
The solid circle indicates which op-
tion is currently selected.

Press or  to select a different
option.

Press.
The option is activated. A correspond-
ing display will appear in the status bar
for all options except
Normal sequence
.
An option will remain activated even if
the COMAND is switched OFF and then
ON again.
iThis selection is only possible if at least
two CDs are loaded
in the CD changer.


91 Satellite radio*
Satellite radio operation
Two options are available:
Storing using the number keys

Storing using the Presets menu
Storing via number keys

Press and hold a number key between
3 and " for more than 2 seconds.
The currently selected station is stored
in the corresponding preset location.Storing via Presets menu

Press the
Presets
soft key.
The Preset list appears.

Use or  to select a preset loca-
tion.

Press for more than 2 seconds.
The currently selected station is stored
in the corresponding preset location.
Resetting Presets menu
The Presets
soft key is active indicated by
its color.

Press the
Presets
soft key again.
All channels in the Preset list are delet-
ed.
Storing stationsiWhen storing a station out of the cate-
gory
All
, later selection of this channel
does not lead into the category mode.

100 Telephone*Telephone operationThe PIN protects the telephone against un-
authorized use. Your PIN is found in the
telephone service provider's documenta-
tion.
Commit your PIN to memory.
Most telephone functions are not available
before entering the PIN.

Press the corresponding number key
3 - " for each digit.
In case of erroneous entry, you can de-
lete the last or more digits.
Press the
Delete
soft key as often as
required.

Once all digits have been entered,
press the
OK soft key.
If the input is correct, the telephone
will log itself into the network.If the input is incorrect, message
Wrong PIN number
will appear briefly.

Re-enter the PIN.
After three incorrect entries, the SIM
card is blocked. Message
SIM card
blocked
will appear briefly.

The PUK has to be entered.
(Telephone Operation Guide)
iThe telephone cannot be used before it
is logged-in.