lock MERCEDES-BENZ SLK-Class 2005 R171 Comand Manual

ContentsSatellite radio*. . . . . . . . . . . . . . . . . . 83
General information . . . . . . . . . . . . . . . 84
Introduction to satellite radio . . . . . 84
Satellite radio operation . . . . . . . . . . . . 85
Switching to Satellite radio mode . . 85
SAT main menu . . . . . . . . . . . . . . . . 86
Selecting a station . . . . . . . . . . . . . 87
Obtaining additional text
information . . . . . . . . . . . . . . . . . . . 90
Storing stations . . . . . . . . . . . . . . . 91
Calling the Sirius Service Center . . 92Telephone*. . . . . . . . . . . . . . . . . . . . . 93
Important notes . . . . . . . . . . . . . . . . . . 94
Safety instructions . . . . . . . . . . . . . 94
Tips on telephone operation . . . . . . 94
Telephone operation. . . . . . . . . . . . . . . 97
Switching the phone ON/OFF . . . . 97
911 emergency call . . . . . . . . . . . . 98
Entering the PIN (only GSM) . . . . . 99
Entering the unlock code . . . . . . . 101
Switching to telephone mode . . . 102
Telephone main menu . . . . . . . . . 102
Answering an incoming call . . . . . 104Placing an outgoing call . . . . . . . . 105
Accepted and missed calls . . . . . . 106
Dialed calls . . . . . . . . . . . . . . . . . . 108
Speed dial . . . . . . . . . . . . . . . . . . 110
Active call . . . . . . . . . . . . . . . . . . . 110
Phone book . . . . . . . . . . . . . . . . . . . . 112
Opening the phone book. . . . . . . . 112
Phone Book menu . . . . . . . . . . . . . 112
Selecting a phone book entry and
establishing a connection . . . . . . 114
Adding a voice entry to a phone
book entry. . . . . . . . . . . . . . . . . . . 115
Deleting a phone book entry . . . . 115
SMS (Mail) . . . . . . . . . . . . . . . . . . . . . 116
SMS inbox . . . . . . . . . . . . . . . . . . . 116
Reading a message . . . . . . . . . . . . 118
Deleting a message . . . . . . . . . . . 118
Exiting from the SMS menu . . . . . 118
Navigation*. . . . . . . . . . . . . . . . . . . . 119
Important notes . . . . . . . . . . . . . . . . . 120
Safety instructions . . . . . . . . . . . . 120
Tips on the navigation DVD. . . . . . 121
Loading/ejecting the DVD . . . . . . 121
Travelling abroad. . . . . . . . . . . . . . 122Route guidance with GPS . . . . . . . 122
Determination of location after
vehicle transport . . . . . . . . . . . . . 122
Trip interruption during route
guidance . . . . . . . . . . . . . . . . . . . 123
Selection lists . . . . . . . . . . . . . . . . 124
Navigation main menu . . . . . . . . . . . . 125
Calling up the Navigation main
menu . . . . . . . . . . . . . . . . . . . . . . . 125
Avoiding certain road types . . . . . 126
Adjusting the acoustics for
navigation announcements . . . . . . 127
Destination entry . . . . . . . . . . . . . . . . 129
Entering data. . . . . . . . . . . . . . . . . 129
Entering a home address . . . . . . . 131
Destination entry menu. . . . . . . . . 133
Entering a destination . . . . . . . . . . 133
Selecting the region . . . . . . . . . . . 134
Entering a city . . . . . . . . . . . . . . . . 135
Narrowing of the destination
after selecting a city . . . . . . . . . . . 137
Entering a city center . . . . . . . . . . 137
Entering a street in the destination
city . . . . . . . . . . . . . . . . . . . . . . . . 138
Narrowing of the destination after
selecting a street . . . . . . . . . . . . . 140

21 At a glance
Telephone* operating elements
Function
Page
1

Telephone main menu
Switching the telephone
ON
Switching the telephone
OFF
102
97
97
2
Soft keys
(multifunction buttons)
Function
Page
3
3 - "
Entering PIN
Entering unlock code
Entering phone number
Speed dial
99
101
105
110
4
, , , 
Selection buttons
5

Confirmation
Function
Page
6
0
Answering calls
Starting connection
Redialing
104
110
106
7
/
Ending or refusing a call
104
8
.
Switching COMAND
ON/OFF
30
9
4
Volume adjustment
30

30 At a glanceQuick reference COMAND
Switching ON
Turn the key in the steering lock to po-
sition 1 or 2,
or

Press..
COMAND switches on the last active
system and displays the corresponding
menu.Switching OFF

Turn the key in the steering lock to po-
sition 0 and remove it,
or

Press..
Different volume settings are possible for
Navigation*, Telephone*, or Voice con-
trol*.
iThe system can be operated as follows:
from COMAND itself, or

from the multifunction steering
wheel
This operating manual describes oper-
ation from COMAND and from the mul-
tifunction steering wheel.
Unless otherwise specified, the de-
scriptions and the displays illustrated
relate to the COMAND control unit.
Switching COMAND ON/OFFiWithout the key in position 1 or 2 of the
steering lock, the system automatically
switches OFF again after approx. 30
minutes of inactivity.
iIf a telephone call is in progress (hands-
free) you cannot switch the COMAND
OFF, . is disabled.Volume

96 Telephone*Important notes
Make sure that the air vents are not
pointed in the direction of the micro-
phones located in the overhead control
panel near the rear view mirror. Adjust
air vents and/or reduce blower speed
if necessary.

A brief disconnection from the cellular
network is not a malfunction, as this
can occur when the network switches
areas. The phone automatically at-
tempts to again sign on with a network.

If the message
Enter unlock code
is dis-
played, enter the unlock code
(
page 101). Only then will you be
able to use all the telephone functions.
You will still be able to make 911 emer-
gency calls (
page 98) if the tele-
phone is locked. The telephone cannot, or not yet, be used
in the following situations:

The telephone is already unlocked, but
it is not yet registered with the net-
work.
The message
NO SERV.
appears in the
status bar. The telephone automatical-
ly attempts to register with a network.
If there is no network available, “911”
emergency calls can NOT be placed.
If you try to place an outgoing call, the
message
Call not possible
is displayed
temporarily.

If the message
Telephone being
activated, please wait
is displayed,

If the message
Please insert phone
is
displayed.

Insert the cell phone into the tele-
phone cradle*.

98 Telephone*Telephone operationThe following conditions must be met for a
“911” emergency call:
cell phone readily inserted in cradle

telephone switched ON

available cell phone networkThe 911 emergency call will also function if
the telephone is locked.
Placing an emergency call
An emergency call can be placed using the
cell phone or the COMAND control unit.
Using the cell phone
(
Telephone Operation Guide).Using the COMAND control unit before
PIN or unlock code entry

Press the
911
soft key.
The system opens an inquiry menu
prompting you if you want to dial a
911 call.
911 emergency callWarning
G
The “911” emergency call system is a
public service. Using it without due
cause is a criminal offense.
iIf you cannot make an emergeny call,
you will have to initiate rescue mea-
sures yourself.

99 Telephone*
Telephone operation

If necessary, press  to select
Yes
.

Press  to confirm
Yes
if you want to
place the 911 emergency call.
The telephone establishes the connec-
tion, the ringing tone is audible.

Wait until the emergency call center
answers, then describe the emergency.
If you do not want to place the emergency
call:

Press  to select
No when the inquiry
menu appears.

Press  to confirm
No.Using the COMAND control unit after
PIN and unlock code entry

Press repeatedly until the Tele-
phone main menu appears.
In succession, press the number keys !,
3 and 3.

Press0.
The telephone establishes the connec-
tion, the ringing tone is audible.

Wait until the emergency call center
answers, then describe the emergency.Entering the PIN (only GSM) iThe PIN may be entered on the cell
phone itself (
Telephone Operation
Guide).


100 Telephone*Telephone operationThe PIN protects the telephone against un-
authorized use. Your PIN is found in the
telephone service provider's documenta-
tion.
Commit your PIN to memory.
Most telephone functions are not available
before entering the PIN.

Press the corresponding number key
3 - " for each digit.
In case of erroneous entry, you can de-
lete the last or more digits.
Press the
Delete
soft key as often as
required.

Once all digits have been entered,
press the
OK soft key.
If the input is correct, the telephone
will log itself into the network.If the input is incorrect, message
Wrong PIN number
will appear briefly.

Re-enter the PIN.
After three incorrect entries, the SIM
card is blocked. Message
SIM card
blocked
will appear briefly.

The PUK has to be entered.
(Telephone Operation Guide)
iThe telephone cannot be used before it
is logged-in.

101 Telephone*
Telephone operation
The unlock code protects the telephone
against unauthorized use. To activate the
unlock code (
Telephone Operation
Guide).
Commit your unlock code to memory.
Most telephone functions are not available
before entering the unlock code.
Example: unlock code 2307

In sequence, press the number
keys, ," and .
In case of erroneous entry, you can de-
lete the last or more digits.
Press the
Delete
soft key as often as
required.

After entering all digits, press or the OK soft key.
All telephone functions are available if
the correct number has been entered.
After registering, information referring
to the telephone signal appears at the
right end of the status bar.
The unlock code has to be entered
again if the entry was incorrect.
Entering the unlock code iThe screen switches back to the last
active mode if the unlock code is not
entered within 8 seconds after you are
prompted to do so.

103 Telephone*
Telephone operation

READY
= telephone is logged into your
mobile communcations home network
and ready for use,

ROAMING
= telephone is logged into a mo-
bile communications network outside
your home network,

NO SERV.
= no network available,

= telephone signal strength,

= call active (
page 110).
Other messages could also appear:

If the message Please insert phone
, Phone not installed
or
Please insert SIM card

appears, see chapter “Switching the
phone ON / OFF” (
page 97).

If the messagePlease Enter PIN:
appears, see “Enter-
ing the PIN” (
page 99).

If the message Enter unlock code:
appears, see “Enter-
ing unlock code” (page 101).
Selectable soft keys and options

soft key
Opens the phone book (
page 112),

Recvd.#
soft key
Opens the accepted and missed calls
list (
page 107),

Dialed #
soft key
Opens dialed calls list (
page 108),

SMS
soft key
Provides access to the SMS menu
(page 116),

Entry of a phone number (
page 105).
iIf a list is empty, the corresponding soft
key ( ,
Recvd.#
, Dialed #
or
SMS
) is
without function and appears shaded
out.

157 Navigation*
During route guidance

If the soft key displays are shown
(page 156), press the
Info
soft key.
The Info menu appears. It shows the
main destination and a stop-over
destination that may have been en-
tered.
1Estimated time of arrival
2Remaining driving time in hours and
minutes
3Remaining journey (distance)1, 2 and 3 refer to the stop-over
destination. You'll only see the details
for the final destination when you arrive
at your stopover and the system has
calculated the route to the main desti-
nation.Selectable soft keys

Route
soft key:
Provides access to the display of the
route on the map,

Mode
soft key:
Provides access to the setting of the
route mode (
page 126).

In the Info menu, press the
Route
soft
key.
Info menu
s
iThe estimated time of arrival does not
refer to the time zone of destination,
but always refers to the time zone of
the vehicle's current location. For a
correct calculation, make sure that the
system clock is set correctly
(page 190).
Displaying the route on the map