bolt pattern MERCEDES-BENZ V-CLASS 2021 Owners Manual

R
R
emo
emo ving a wheel
ving a wheel R
R
eq
eq uir
uir ements:
ements:
R The vehicle is raised (/ page 262).
When changing a wheel, avoid applying any force
to the brake discs since this could impair the le vel
of comfort when braking.
* NO
NOTE
TEDamage tothre ading from dirt on
wheel bolts #
Do not place wheel bolts in sand or on a
dirty sur face. #
Unscr ewthe wheel bolts. #
Remo vethe wheel. F
F
itting a ne
itting a ne w wheel
w wheel R
R
eq
eq uir
uir ements
ements
R The wheel is remo ved (/ page 263). &
W WARNING ARNING Risk of accident from losing a
wheel
Oiled or greased wheel bolts can cause the
wheel bolts tocome loose, as too can dam-
aged wheel bolts or wheel hub thre ads. #
Never oil or grease theth re ads. #
Intheev ent of damage totheth re ads,
contact a quali/ed specialist workshop
immediatel y. #
Have the damaged wheel bolts or dam-
aged hub thre ads replaced. #
Do not continue driving. &
W
WARNING
ARNING Risk of injury from tightening
wheel bolts and nuts
If yo u tighten the wheel bolts or wheel nuts
when theve hicle is raised, the jack could tip. #
Only tighten wheel bolts or wheel nuts
when theve hicle is on thegr ound. #
Obser vethe information on thech oice of tyres
(/ page 258). #
Obser vethe inst ructions and saf ety no tes on
ch anging a wheel (/ page 258).#
For saf etyre asons, only use wheel bolts or
wheel nuts which ha vebeen appr ovedby
Mercedes-Benz and forth e wheel in question. #
Clean the wheel and wheel hub contact sur fa-
ces. Low
Low
er
ering t
ing t he v
he vehicle
ehicle aTer
aTera wheel c
a wheel c hange
hange &
W
WARNING
ARNING Risk of accident due toincor-
re ct tightening torque
The wheels could come loose if the wheel bolts
or wheel nuts are not tightened tothe prescri-
bed torque. #
Ensure that the wheel bolts or wheel nuts
are tightened tothe prescribed tighten-
ing torque. #
Ifyo u are not sure, do not mo vetheve hi-
cle. Con tact a quali/ed specialist work-
shop and ha vethe tightening torque
ch ecked immediatel y. R
R
eq
eq uir
uir ements:
ements:
R The new wheel has been /t ted (/page 263). #
Place the adap ter and thera tchet on the he xa-
gon head nut of the jack such that the lettering
AB/DOWN is visible. #
T
To low
o low er t
er the v
he v ehicle:
ehicle: turnthera tchet of the
jack anti-clockwise. #
S
St
teel wheels:
eel wheels: tightenth e wheel bolts evenly in
a crosswise pattern in the sequence indicated
(1 to5 ) and toa maximum of 200 Nm. #
Light-allo
Light-allo y wheels:
y wheels: tightenthe wheel bolts
ev enly in a crosswise pattern in the sequence
indicated (1 to5 ) and toa maximum of
180 Nm. #
Check the tyre pressure of the ne wly/tted
wheel and adjust it if necessar y.
V
V ehicles wit
ehicles wit h t
h the tyr
he tyr e pr
e pressur
essur e monit
e monit or syst
or system:
em:all
/t ted wheels must be equipped with functioning
sensors. #
Retighten the wheel bolts tothe speci/ed tight-
ening torque aTer theve hicle has been driven
50 km. Wheels and tyres
263
263