automatic transmission Mercury Mountaineer 1997 Owner's Manuals

Speed control
Do not shift the
transmission into N with
the speed control on.
Speed control maintains vehicle
speed automatically at or above
48km/h (30 mph) using the control
switches.
Press ON to turn speed control on.
SPEED
CONTwill illuminate in the
instrument cluster.
Press OFF to turn speed control
off. When turned off, the
previously programmed set speed
will be erased.
0P RND21
UNLEADED
FUEL ONLY
RPM x 100012345
6H
C
F
E
RSM
SET
ACC
COAST OFF ON
SRS
- +H
H
L L
OFF ON
020
1030405060
70
80
90
110
120000000oooo
km/h100
20406080100
120
140
160
180
Controls and features
23

Overdrive control
Activating overdrive
OverdriveDis the normal drive
position for the best fuel economy
and will remain on until overdrive
is deactivated.
The overdrive function allows
automatic upshifts to 2nd, 3rd, and
4th gear.
Deactivating overdrive
Press the transmission control
switch on the end of the gearshift
lever. The transmission control
indicator light (TCIL)
O/D
OFFwill
illuminate on the instrument
cluster.
Transmission will operate in gears
1-3. To return to normal overdrive
mode, press the transmission
control switch again.
O/D
OFFwill turn
off.
When starting your vehicle, the
transmission will automatically
return to normal overdrive mode.
Deactivate overdrive when:
²driving with a heavy load
²driving in hilly areas
²additional engine braking is
desired
0P RND21
UNLEADED
FUEL ONLY
RPM x 100012345
6H
C
F
E
RSM
SET
ACC
COAST OFF ON
SRS
- +H
H
L L020
1030405060
70
80
90
110
120000000oooo
km/h100
20406080100
120
140
160
180
O/D
ON/OFF
Controls and features
26

Pull release handle towards you to
release parking brake.
If the parking brake is fully
released, but the
warning light remains on,
have the brakes checked
immediately. They may not be
working properly.
AUTOMATIC TRANSMISSION
OPERATION (4R70W)
Hold the brake pedal down
while you move the
gearshift from position to
position. If you do not hold the
brake pedal down, your vehicle
may move unexpectedly and
injure someone.
Driving
98

D- OverdriveThe normal
driving position for the best fuel
economy. Transmission operates in
gears 1-4.
D(Overdrive) can be
disengaged by pressing the
transmission control switch on the
gearshift lever. The transmission
control indicator light on
instrument cluster will remain off.
D - DriveNot shown on the
display. Activate by pressing
transmission control switch.
O/D
OFFwill illuminate on the
instrument cluster. Transmission
operates in gears 1-3. Provides
more engine braking than
D(Overdrive) and is useful when
towing a trailer or heavy loads
through hilly areas.
To return to normal overdrive
mode, press the transmission
control switch again.
O/D
OFFwill turn
off.
When starting your vehicle, the
transmission will automatically
return to normal
D(Overdrive)
mode.
2 - SecondUse 2 (Second) to
start-up on slippery roads or to
provide additional engine braking
0P RND21
UNLEADED
FUEL ONLY
RPM x 100012345
6H
C
F
E
RSM
SET
ACC
COAST OFF ON
SRS
- +H
H
L L020
1030405060
70
80
90
110
120000000oooo
km/h100
20406080100
120
140
160
180
O/D
ON/OFF
Driving
100

heavy load. If vehicle speed drops
more than 15 - 25 km/h (8 - 14
mph) the speed control will cancel
automatically. Resume speed with
accelerator pedal.
If speed control cancels after
climbing the hill, reset speed by
pressing and holding the SET
ACCEL button or returning to
previous speed by pressing the
RESUME button (to resume
speeds over 50 km/h [30 mph]).
Automatic transmissions may shift
frequently while driving up on
steep grades. Eliminate frequent
shifting by shifting out of
D(Overdrive) into D (Drive).
Driving on snow and ice
An AWD vehicle has advantages
over two-wheel drive vehicles in
snow and ice but can skid like any
other vehicle.
Avoid sudden applications of
power and quick changes of
direction on snow and ice. Apply
the accelerator slowly and steadily
when starting from a full stop.
When braking, apply the brakes as
you normally would. In order to
allow the anti-lock brake system
(ABS) to operate properly, keep
steady pressure on the brake
pedal.
Allow more stopping distance and
drive slower than usual. Consider
using one of the lower gears.
If the vehicle is stuck, shift the
transmission in a steady motion
Driving
106

below the maximum shown under
maximum trailer weight on the
chart.
Trailer Towing Table
4R70W Automatic Transmission
EngineRear
Axle
RatioMaximum
GCWR kg (lb)
1
Maximum
Trailer Weight
kg (lb)
2
Maximum
Frontal Area of
Trailer ft
2-Wheel Drive
5.0L 3.73 4,990 (11,000) 3,039 (6,700) 50
All-Wheel Drive
5.0L 3.73 4,990 (11,000) 2,944 (6,500) 50
1For high altitude operation, reduce GCWR by 2% per 300 meters
(1,000 ft) elevation.
2To determine the maximum trailer weight designed for your particular
vehicle as equipped, follow the sectionCalculating the load your
vehicle can carry/towearlier in this section.
Preparing to tow
Use the proper equipment for
towing a trailer, and make sure it
is properly attached to your
vehicle. See your dealer or a
reliable trailer dealer if you require
assistance.
Hitches
Do not use or install hitches that
clamp onto the bumper or to the
axle. Underbody hitches are
acceptable if installed properly.
The rear bumper has an integral
hitch and only requires a ball with
a 3/4 inch shank diameter. The
Driving
112

IDENTIFYING COMPONENTS IN
THE ENGINE COMPARTMENT
V1Engine coolant recovery
reservoir
V2Windshield washer reservoir
V3Engine oil filler tube
V4Automatic transmission dipstick
V5Brake master cylinder
V6Power distribution box
V7Battery
V8Radiator cap
V9Power steering fluid reservoir
V10Engine oil dipstick
V11Ignition coil packs
V12Air cleaner
3
4
5
6
2
1
1211
108
79
5.0L
V8
Maintenance and care
139

3. Visually inspect the fluid level in
the power steering reservoir.
4. If necessary, add power steering
fluid until the fluid level reaches
MAX. Do not overfill the power
steering reservoir.
²As a maintenance precaution,
visually inspect the lines and
hoses of the power steering
system for leaks and damage.
²If new fluid is frequently
required, consult a qualified
service technician.
²Use fluid certified to meet Ford
Motor Company lubricant
specifications. Refer toRefill
capacitiesandLubricant
specificationslater in this
chapter.
CHECKING AND ADDING
AUTOMATIC TRANSMISSION
FLUID
Check the automatic transmission
fluid according to the scheduled
intervals in theService Guide.
Before adding any fluid, make sure
the correct type will be used. This
information is indicated on the
dipstick.
Your vehicle should not be
driven if the fluid level is
below the bottom hole in the
dipstick and outside
temperatures are above 10ÉC
(50ÉF).
DONOTOVERFILLPOWERSTEERINGFLUID
MAX
MIN
Maintenance and care
149

Fluid Component Capacity
Transfer case fluid (if
equipped)Borg Warner AWD
transfer case1.25 L (2.64 pts.)
Transmission fluid,
automaticAutomatic 4R70W
(2WD and AWD)13.2 L (13.9 qts.)
Windshield washer
fluid, frontFront washer fluid
reservoir2.6 L (2.8 qts.)
Windshield washer
fluid, rearLiftgate washer fluid
reservoir3.1 L (3.3 qts.)
1Fill to 6-15 mm (1/49to 9/169) from the bottom of the filler hole.
2Includes1L(1qt.) for filter replacement.
3All rear axle lube quantities must be replaced every 160,000 km
(100,000 miles) or if the axle has been submerged in water. Otherwise,
the lube should not be checked or changed unless a leak is suspected or
repair required. Refer to theService Guide.
Capacities and specifications
186

ComponentFord part
nameFord part
numberFord
specification
Engine oil Motorcraft
Motor Oil
5W-30 Super
PremiumX0-5W30 QSP WSS-M2C153-F
with API
Certification
mark
Door
weatherstripsSilicone
LubricantC0AZ-19553-AA ESR-M13P4-A
Automatic
transmission
shift linkage
and brake pedal
shaftPremium
Long-Life
GreaseXG-1-C or K ESA-M1C75-B
Automatic
transmission
4R70WMotorcraft
MERCONtAT FXT-2-QDX MERCONt
Power steering
reservoirMotorcraft
MERCONtAT FXT-2-QDX MERCONt
Parking brake
cableSpeedometer
Cable
LubricantE6TZ-19581-A ESF-M1C160-A
Accelerator
throttle lever
ball studPremium
Long-Life
GreaseXG-1-C or K ESA-M1C75-B
Ford
conventional
and
Traction-Lok
rear axles
1
Motorcraft
75W/40
Premium
Synthetic Rear
Axle LubricantXY-80W90-QL WSP-M2C197-A
Drive shaft,
universal joints
and slip spinesPremium
Long-Life
GreaseXG-1-C or K ESA-M1C75-B
Capacities and specifications
188