Mercury Sable 1999 s Owner's Guide

Tune adjust for CD mode
²Press theto select the previous disc in the CD
changer. (Play will begin on the first track of the
disc unless the CD changer is in shuffle mode.
Refer toShuffle featurefor more information.
Hold the control to continue reversing through
the disc.
²Press
to select the next disc in the CD
changer. Hold the control to fast-forward through
the remaining discs.
Seek function
The seek function
control works in radio,
tape or CD mode.
Seek function in radio mode
²Pressto find the next listenable station down
the frequency band.
²Press
to find the next listenable station up the
frequency band.
Seek function in tape mode
²Pressto listen to the previous selection on the
tape.
²Press
to listen to the next selection on the
tape.
Seek function in CD mode
²Pressto seek to the previous track of the
current disc. If a selection has been playing for
three seconds or more and you press
, the CD
changer will replay that selection from the
beginning.
²Press
to seek forward to the next track of the
current disc. After the last track has been
completed, the first track of the current disc will
automatically replay.
SEEK
Controls and features
31

Scan function
The scan function
works in radio, tape or
CD mode.
Scan function in radio mode
Press the SCAN control to hear a brief sampling of
all listenable stations on the frequency band. Press
the control again to stop the scan mode.
Scan function in tape mode
Press the SCAN control to hear a short sampling of
all selections on the tape. (The tape scans in a
forward direction. At the end of the tape's first side,
direction automatically reverses to the opposite side
of the tape.) To stop on a particular selection, press
the control again.
Scan function in CD mode
Press the SCAN control to hear a short sampling of
all selections on the CD. (The CD scans in a forward
direction, wrapping back to the first track at the end
of the CD.) To stop on a particular selection, press
the control again.
Radio station memory preset
The radio is equipped with six station memory
preset controls. These controls can be used to select
up to six preset AM stations and twelve FM stations
(six in FM1 and six in FM2).
Setting memory preset stations
1. Select the frequency
band with the AM/FM
select control.
2. Select a station.
Refer toTune adjust
orSeek functionfor
more information on selecting a station.
SCAN
AM
FM
VOL
PUSH-ON
Controls and features
32

3. Press and hold a memory preset control until the
sound returns, indicating the station is held in
memory on the control you selected.
Bass/treble adjust
²The bass adjust
control allows you to
increase or decrease
the audio system's
bass output.
²The treble adjust
control allows you to
increase or decrease
the audio system's
treble output.
Speaker balance/fade adjust
²Speaker sound
distribution can be
adjusted between
the right and left
speakers.
REWSIDE 1-2COMPSHUFFLE123456
FF
BASSTREB
BAL
FADE
BASS
TREB
BAL
FADE
BASS
TREB
BAL
FADE
Controls and features
33

²Speaker sound can
be adjusted between
the front and rear
speakers.
Inserting a tape
Push only slightly when
inserting a cassette
tape (with the open
edge to the right). A cassette deck loading
mechanism pulls the tape in the rest of the way.
You can switch from CD to tape play by inserting a
tape into the cassette deck.
Tape/CD select
²To begin tape play
(with a tape loaded
into the audio
system) while in the
radio or CD mode, press the TAPE control. Press
the button during rewind or fast forward to stop
the rewind or fast forward function.
²To begin CD play (if CDs are loaded in the CD
changer), press the CD button. The first track of
the first disc will begin playing. After that CD play
will begin where it stopped last.
Rewind
The rewind control
works in tape and CD
modes.
²In tape mode, radio play will continue until
rewind is stopped (with the TAPE control) or the
beginning of the tape is reached.
BASS
TREB
BAL
FADE
DOLBY B ®TAPECDEJECT
TAPECD
REW
5
Controls and features
34

²In CD mode, pressing the REW control for less
than three seconds results in slow rewind.
Pressing the control for more than three seconds
results in fast rewind.
Fast forward
The fast forward
control works in tape
and CD modes.
²In the tape mode,
tape direction will
automatically reverse
when the end of the
tape is reached.
²In CD mode, pressing the control for less than
three seconds results in slow forward action.
Pressing the control for more than three seconds
results in fast forward action.
Tape direction select
Press SIDE 1±2 to play
the alternate side of a
tape.
DolbyTnoise reduction
Dolbytnoise reduction
operates only in tape
mode. Dolbytreduces
the amount of hiss and
static during tape
playback.
Press the
button to
activate (and deactivate) Dolbytnoise reduction.
The noise reduction system is manufactured under
license from Dolby Laboratories Licensing
Corporation.
FF
6
4SIDE 1-2
Controls and features
35

Compression adjust
Compression adjust
brings soft and loud CD
passages together for a
more consistent
listening level.
Press the COMP
control to activate and deactivate compression
adjust.
Shuffle feature
The shuffle feature
operates in CD mode
and plays all tracks on
the current disc in
random order.
If equipped with the
CD changer, the shuffle
feature continues to the next disc after all tracks are
played.
Press the SHUFFLE control to start this feature.
Random order play will continue until the SHUFFLE
control is pressed again.
Setting the clock
To set the hour, press
and hold the hour (h)
control. When the
desired hour appears,
release the control.
To set the minute,
press and hold the
minute (m) control.
When the desired
minute appears, release
the control.
COMP
SHUFFLE
12
COMP
SHUFFLE
12
MH
MH
Controls and features
36

CD changer (if equipped)
Your CD changer is either located in the trunk or in
the right side cargo area storage compartment.
Slide the door to
access the CD changer
magazine.
Press
to eject the
magazine.
Make sure only one
disc is inserted in each
slot. Each disc must be
inserted with the label
surface upward.
Depending on your
system, you may insert
up to six or ten CDs.
The magazine does not
need to be full for the
changer to operate.
Radio power must be turned on to play the CDs in
the changer. The magazine may be stored in the
glove compartment when not being used.
6
5
4
3
2
16 COMPACT DISC MAGAZINECOMPACT
DIGITAL AUDIO
Controls and features
37

The CD magazine may be inserted or ejected with
the radio power off.
Troubleshooting the CD changer (if equipped)
The laser beam used in the compact disc
player is harmful to the eyes. Do not
attempt to disassemble the case.
If sound skips:
²You may be traveling on a rough road, playing
badly scratched discs or the disc may be dirty.
Skipping will not scratch the discs or damage the
player.
If your changer does not work, it may be that:
²A disc is already loaded where you want to insert
a disc.
²The disc is inserted with the label surface
downward.
²The disc is dusty or defective.
²The player's internal temperature is above 60ÉC
(140ÉF). Allow the player to cool down before
operating.
²A disc with format and dimensions not within
industry standards is inserted.
Cleaning compact discs
Inspect all discs for contamination before playing. If
necessary, clean discs only with an approved CD
cleaner and wipe from the center out to the edge.
Do not use circular motion.
CD and CD changer care
²Handle discs by their edges only. Never touch the
playing surface.
²Do not expose discs to direct sunlight or heat
sources for extended periods of time.
Controls and features
38

²Do not insert more than one disc into each slot of
the CD changer magazine.
Cleaning cassette player (if equipped)
Clean the tape player head with a cassette cleaning
cartridge after ten to twelve hours of play in order
to maintain the best sound and operation.
Cassette and cassette player care
²Use only cassettes that are 90 minutes long or
less.
²Do not expose tapes to direct sunlight, high
humidity, extreme heat or extreme cold. Allow
tapes that may have been exposed to extreme
temperatures to reach a moderate temperature
before playing.
²Tighten very loose tapes by inserting a finger or
pencil into the hole and turning the hub.
²Remove loose labels before inserting tapes.
²Do not leave tapes in the cassette player for a
long time when not being played.
Radio frequency information
The Federal Communications Commission (FCC)
and the Canadian Radio and Telecommunications
Commission(CRTC) establish the frequencies AM
and FM stations may use for their broadcasts.
Allowable frequencies are:
AM 530, 540±1600, 1610 kHz
FM 87.9, 88.1±107.1, 107.9 MHz
Not all frequencies are used in a given area.
Radio reception factors
Three factors can affect radio reception:
²Distance/strength.The further an FM signal
travels, the weaker it is. The listenable range of
the average FM station is approximately 40 km
(24 miles). This range can be affected by ªsignal
Controls and features
39

modulation.º Signal modulation is a process radio
stations use to increase their strength/volume
relative to other stations.
²Terrain.Hills, mountains and tall buildings
between your vehicle's antenna and the radio
station signal can cause FM reception problems.
Static can be caused on AM stations by power
lines, electric fences, traffic lights and
thunderstorms. Moving away from an interfering
structure (out of its ªshadowº) returns your
reception to normal.
²Station overload.Weak signals are sometimes
captured by stronger signals when you pass a
broadcast tower. A stronger signal may
temporarily overtake a weaker signal and play
while the weak station frequency is displayed.
The audio system automatically switches to single
channel reception if it will improve the reception of
a station normally received in stereo.
Audio system warranties and service
Refer to the ªWarranty Guideº for audio system
warranty information.
If service is necessary, see your dealer or a qualified
technician.
POSITIONS OF THE IGNITION
1. ACCESSORY, allows
the electrical
accessories such as the
radio to operate while
the engine is not
running.
2. LOCK, locks the
steering wheel,
automatic transmission gearshift lever and allows
key removal.
3. OFF, shuts off the engine and all accessories
without locking the steering wheel.
1
23
4
5
Controls and features
40