steering wheel Mercury Sable 2003 s User Guide

WINDOWS AND WIPER BLADES
The windshield, rear window and wiper blades should be cleaned
regularly. If the wiper does not wipe properly, substances on the
windshield, rear window or the wiper blades may be the cause. These
may include hot wax treatments used by commercial car washes, tree
sap, or other organic contamination. To clean these items, please follow
these tips:
•The windshield or rear window may be cleaned with a non-abrasive
cleaner such as Motorcraft Ultra Clear Spray Glass Cleaner (ZC-23),
available from your dealer.
•Do not use abrasives, as they may cause scratches.
•Do not use fuel, kerosene, or paint thinner to clean any parts.
•Wiper blades can be cleaned with isopropyl (rubbing) alcohol or
windshield washer solution. Be sure to replace wiper blades when they
appear worn or do not function properly.
INSTRUMENT PANEL AND CLUSTER LENS
Clean the instrument panel with a damp cloth, then dry with a dry cloth.
•Avoid cleaners or polish that increase the gloss of the upper portion of
the instrument panel. The dull finish in this area helps protect the
driver from undesirable windshield reflection.
Do not use chemical solvents or strong detergents when cleaning
the steering wheel or instrument panel to avoid contamination of
the air bag system.
•Be certain to wash or wipe your hands clean if you have been in
contact with certain products such as insect repellent and suntan
lotion in order to avoid possible damage to the interior painted
surfaces.
CLEANING SEATS EQUIPPED WITH SIDE AIR BAGS
Remove dust and loose dirt with a vacuum cleaner. In order to remove
stains and soil, clean with Extra Strength Upholstery Cleaner
(E8AZ-19523–AA).
Never saturate the seat covers with any cleaning solution.
Do not use chemical solvents or strong detergents when cleaning
the seat where the side air bag is mounted. Such products could
contaminate the side air bag system and affect performance of the side
air bag in a collision. The air bag may not function correctly and not
provide injury reduction benefits.
Cleaning
159

If the vehicle’s powertrain system or its battery has just been serviced,
the on-board diagnostics system is reset to a“not ready for I/M test”
condition. To ready the on-board diagnostics system for I/M testing, a
minimum of 30 minutes of city and highway driving is necessary as
described below:
•First, at least 10 minutes of driving on an expressway or highway.
•Next, at least 20 minutes driving in stop-and-go, city-type traffic with
at least four idle periods.
Allow the vehicle to sit for at least eight hours without starting the
engine. Then, start the engine and complete the above driving cycle. The
engine must warm up to its normal operating temperature. Once started,
do not turn off the engine until the above driving cycle is complete.
CHECKING AND ADDING POWER STEERING FLUID
Check the power steering fluid.
Refer to the scheduled maintenance
guide for the service interval
schedules. If adding fluid is
necessary, use only MERCONAT F.
1. Start the engine and let it run until it reaches normal operating
temperature (the engine coolant temperature gauge indicator will be
near the center of the normal area between H and C).
2. While the engine idles, turn the steering wheel left and right several
times.
3. Turn the engine off.
Maintenance and Specifications
188

locking/unlocking doors ...........60
opening the trunk .....................63
Roadside assistance ..................127
Roof rack .....................................59
S
Safety Belt Maintenance ............91
Safety belts (see Safety
restraints) ..................77, 79–82, 84
Safety defects, reporting ..........155
Safety restraints ..............77, 79–85
belt minder ...............................87
extension assembly ..................90
for adults .............................80–82
for children .........................97–98
lap belt ......................................84
safety belt maintenance ...........91
warning light and chime ....86–87
Safety seats for children ..........101
Seat belts (see Safety
restraints) ....................................77
Seats ............................................73
child safety seats ....................101
cleaning ...................................159
Servicing your vehicle ..............162
Spare tire (see Changing the
Tire) ...........................................136
Spark plugs,
specifications .....................196, 200
Specification chart,
lubricants ...........................198, 200
Speed control ..............................51
Starting a flex fuel vehicle .......112
Starting your vehicle .......109–110,
112
jump starting ..........................140Steering wheel
tilting .........................................46
T
Tilt steering wheel ......................46
Tires ...........................136, 191–193
changing ..........................136–137
checking the pressure ............193
replacing ..................................194
rotating ....................................193
snow tires and chains ............195
tire grades ...............................193
treadwear ................................192
Towing .......................................123
recreational towing .................126
trailer towing ..........................123
wrecker ....................................145
Traction control ........................115
Transaxle
fluid, refill capacities ..............197
lubricant specifications ..........200
Transmission .............................117
fluid, checking and adding
(automatic) .............................190
lubricant specifications ..........198
Trunk ...............................57, 59–60
remote release ....................56, 63
Turn signal ..................................32
V
Vehicle dimensions ...................200
Vehicle Identification Number
(VIN) ..........................................203
Vehicle loading ..........................121
Ventilating your vehicle ...........113
W
Warning chimes .........................115
Index
211