Mercury Sable 2003 Quick Reference Guide

This Quick Reference Guide is not intended to replace your
vehicle’s Owner’s Guide, which contains more detailed
information concerning the features of your vehicle and
important safety warnings to help reduce the risk of injury to
you and your occupants. Always read your entire Owner’s
Guide carefully when first learning about your vehicle and
consult the appropriate section when questions arise.
Ford Motor Company
Customer Relationship Center
16800 Executive Plaza Drive
P.O. Box 6248
Dearborn, Michigan 48121
(800) 392-3673
July 2002
First Printing
Quick Reference3F4J-19G217-AASable
Litho in U.S.A.
Outside Temperature–
Press to display the outside air
temperature. Press again to
return to interior temperature.
MAX A/C Control– Press to
manually enable or disable the
air conditioning in all modes
Manual Override Controls–
When pressed, these four controls
will override automatic operation.
All controls allow you to determine
where airflow is directed. To return
to automatic operation, press AUTO.
Temperature Selection– To
control the temperature, select the
desired temperature by pressing the
temperature controls.
Fuel Tank Capacity– Your vehicle’s fuel tank can accommodate approximately
18 gallons of gasoline.
Octane Recommendations– Your vehicle is designed to use "Regular" unleaded
gasoline with pump (R+M)/2 octane rating of 87 for optimum performance. The use of
gasoline with lower octane ratings may degrade performance.
Tire Pressure– Your tire pressure is properly set at the dealership according to the
recommended specifications found on the Certification Label located on the driver’s door
panel. Please check your tire pressure during routine maintenance and seasonal changes.
Warning:Improperly inflated tires can affect vehicle handling and can fail suddenly,
possibly resulting in loss of vehicle control.
Fuses– If electrical components in the vehicle are not working, a fuse may have blown.
For more information about changing a fuse, please consult your Owner’s Guide.
Changing the Tires– If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly and slowly move
to a safe place on the side of the road. Your vehicle is equipped with a spare tire that is
smaller than a regular tire and is designed for emergency use only. Replace the temporary
spare tire with a full-size tire as soon as possible.
Location of the Spare Tire and Tools
Item Location
Spare Tire, Jack and In the sedan, they are located in the trunk cargo
Lug Nut Wrench, area storage compartment.
In the wagon, they are stored in the left side rear trim
panel for the temporary spare and in the floor cargo
area storage compartment for the full size spare.
Roadside Emergencies– To fully assist if you should have a vehicle concern, Ford
Motor Company offers a complimentary roadside assistance program. This program is
separate from the New Vehicle Limited Warranty. The service is available: 24 hours, seven
days a week for the New Vehicle Limited Warranty period of three years or 36,000 miles.
Roadside assistance will cover:
Changing a flat tire Jump-starts Limited fuel delivery
Lockout assistance Towing of your vehicle
Roadside Assistance Centers
Country Phone Number
United States (800) 241-3673
Canada (800) 665-2006
For complete details on any roadside assistance concern, see the Roadside Emergencies
section or the Customer Assistance section in your Owner’s Guide.
AM/FM Select– In radio mode, press
to select AM or FM frequency bands.
Volume/Power Control– Press the
control to turn the audio system on
or off. Turn the control to raise or
lower the volume.
Seek Function– In radio mode,
press to find the next listenable
station up or down the band. In CD
mode, press to move to the next/
previous selection on the CD.
Eject– Press to eject a CD.
Tune Adjust– In radio mode, press
to move to the next frequency up or
down the band. In CD changer mode
(if equipped), press to select a disc
in the changer.
Setting Memory Preset Stations–
Select AM, FM1, or FM2 band, then
select a station. Next, press and hold
a numbered preset control until the
sound returns.
Setting the Clock – Press and
hold the H control to set the hour.
Press and hold the M control to set
the minute.
CD Select– To begin CD play while
in radio mode, press the CD control.
Press again to toggle between single
CD mode and CD changer mode
(if equipped).
Compression– Press to bring soft
and loud passages together for a
more consistent listening level.
Shuffle– Press to play CD tracks in
random order.
Scan Function– In radio mode,
press to hear a sampling of all
listenable stations. In CD or CD
changer mode (if equipped), press to
hear a brief sampling of all selections.
AM/FM Select– In radio mode, press
to select AM or FM frequency bands.
Volume/Power Control– Press the
control to turn the audio system on
or off. Turn the control to raise or
lower the volume.
Seek Function– In radio mode,
press to find the next listenable
station up or down the band. In tape
mode, press to move to the next/
previous selection on the tape.
Side 1-2– Press to change
tape direction.
Tune Adjust– In radio mode, press
to move to the next frequency up or
down the band.
Setting the Clock– Press and
hold the H control to set the hour.
Press and hold the M control to
set the minute.
Tape Select – To begin tape play
while in radio mode, press the
tape control.
Dolby® Noise Reduction– Press
to activate the system, which reduces
tape noise and hiss while playing a
tape. Press again to deactivate.
Scan Function– In radio mode,
press to hear a sampling of all
listenable stations. In tape mode,
press to hear a brief sampling of
all selections.
Setting Memory Preset Stations–
Select AM, FM1, or FM2 band, then
select a station. Next, press and hold
a numbered preset control until the
sound returns.
AM/FM Stereo Single CD(if equipped)Automatic Climate Control System(if equipped)
The rear wiper and washer control is located under the
headlamp controls. Press the wiper control to activate
the rear wiper. Press again to turn off the wiper. Press
the washer control to activate the rear washer.
Essential Information
A
B
C
D
E
F
G
H
I
J
2003 MODELSABLEQUICK REFERENCE GUIDE
A
B
C
D
E
F
G
H
I
J
A
B
C
D
E
G
H
A
C
E
F
I
A
B
C
D
E
F
G
H
I
J
K
For information on other available audio systems or the
CD changer system, please refer to your Owner’s Guide.For information on other available audio systems or the
CD changer system, please refer to your Owner’s Guide.
A
B
C
D
F
G
H
Rear Window Wiper & Washer(Wagon Only)
AM/FM Stereo Cassette(if equipped)
*3F4J19G217AA*
F
J
K
D
B
G
H
Front Window Defroster–
Distributes outside air through
the windshield defroster ducts.
Can be used to clear ice or fog from
the windshield.
Rear Window Defroster– Press to
clear the rear window of ice or fog.
Press the control again to turn off
the defroster. The defroster turns off
automatically after 10 minutes or
when the ignition is turned to the
OFF position. Activating the rear
window defroster will also activate
the heated mirrors (if equipped).
Fan Speed– To adjust manually, use
the control to raise or lower the fan speed.
Automatic Operation– In this
mode, the system will automatically
determine fan speed and airflow
location to achieve the temperature
selected. Press AUTO to engage
the automatic temperature control.
E
Sable_Ref_Guide.qxd 10/27/03 11:28 AM Page 1

From the advanced Personal Safety System
to the bountiful amenities, every Sable
seeks to provide you with safety, comfort
and enjoyment on the road. In order to help
you fully appreciate the countless features
of your new Sable, we invite you to explore
this easy-to-use Quick Reference Guide.
Using the image of the instrument panel
located in the center of the guide, locate
the feature you would like to learn more
about. Each numbered feature is briefly
described to the left of the instrument
panel image. For more information,
please consult your Owner’s Guide.
Headlamp and Panel Dimmer Control
Rotate clockwise to the first position to turn on the parking
lamps, instrument panel lamps, license plate lamps and tail lamps.
Rotate to the second position to also turn on the headlamps. While
the headlamps are on, pull the control toward you to activate the
foglamps (if equipped). Rotate counterclockwise to activate
autolamp (if equipped), which provides light-sensitive automatic on-off control of the exterior lights
and keeps the lights on for a fixed period of time after the ignition is turned OFF. Use the panel
dimmer control, located to the right of the headlamp control, to adjust the brightness of the
instrument panel during headlamp and parking lamp operation.
Turn Signal & Wiper/Washer Control
Push down to activate the left turn signal or up to activate
the right turn signal.
Rotate the end of the control away from you to increase or toward
you to decrease the speed of the wipers. Pushing the end of the
stalk briefly causes a single swipe (no wash). Push and hold to
activate the washer.
For extended wiper blade quality, occasional cleaning of the wiper blades is required.
Service Engine Soon Warning Lamp
Momentarily illuminates to ensure the system is functional. If the light comes
on after the engine is started, refer to your Owner’s Guide. To help prevent activation,
always secure your fuel cap by turning it clockwise 1
/
8of a turn after it stops.
Please note that if the fuel cap is not properly installed, the "Check Fuel Cap" indicator will
also illuminate.
Power Adjustable Foot Pedals (if equipped)
Press and hold the rocker control to adjust the accelerator and brake
pedals toward you or away from you. Adjust the pedals only when the vehicle is
stopped and the gearshift lever is in the P (Park) position. The adjustment allows
for approximately three inches of maximum travel.
Hazard Flasher Control
Press to activate the hazard flashers. Press the control again to turn the
flashers off.
ABS Warning Lamp
Illuminates briefly when the ignition is turned to the ON position. In an
emergency, apply continuous force on the brake to prevent wheel lock when braking
on slippery surfaces – do notpump your brakes. Any pulsation or noise you may
feel or hear is normal.
Traction Control (if equipped)
This system helps your vehicle make better use of available traction,
especially on slippery road surfaces. The system defaults to ON, however,
should you become stuck, try switching the traction control system off. For more
information, please consult your Owner’s Guide.
Audio Systems
Please see reverse side for more details.
Automatic Climate Control System (if equipped)
Please see reverse side for more details.
Auxiliary Power Point
Located under the climate control on the lower portion of the instrument panel,
the auxiliary power point is an additional power source for electrical accessories.
Improper use of the power outlet can cause damage not covered by your warranty.
Gearshift/Overdrive Control
Overdrive is the normal drive position for the best fuel economy. Switch
to the second drive position only when driving with a heavy load, towing a
trailer up or down steep hills, or when additional engine braking is desired.
This vehicle is equipped with a brake-shift interlock feature that
prevents the gearshift lever from being moved from P (Park) when the
ignition is in the ON position unless the brake pedal is depressed. If your
vehicle is equipped with a console-mounted gearshift lever, you must also press the
thumb button on the side of the gearshift lever to move the gearshift lever from P (Park).
Speed Control (if equipped)
To operate, the speed control must be ON and the
vehicle's speed must be at or above 25 mph. To set a speed, press SET
+. To set a higher speed, press SET + again. To set a lower speed, press
CST–. Pressing RES will return to a previously set speed. To turn the
speed control off, press the OFF button or depress the brake pedal
to disengage.
Interior Trunk Control (if equipped)
Press to release the trunk. The control is located on the instrument
panel to the left of the steering wheel.
Brake Release
Pull the release lever to release the parking brake. To set the
parking brake, press the parking brake pedal down until the pedal
stops. The BRAKE warning lamp in the instrument cluster will illuminate
(when the ignition is turned ON).
Hood Release
Pull the hood release handle (rearward) located under the bottom
left corner of the instrument panel. Next, release the auxiliary latch located
under the front center of the hood, and then lift the hood until the lift cylinders
hold it open.
Remote Entry System (if equipped)
Press this control once to unlock the driver’s door, and
twice to unlock all doors and liftgate (wagon only).
Press this control once to lock all doors and liftgate
(wagon only). Pressing the control a second time will chirp
the horn to confirm that all doors are closed and locked.
Press this control to activate the panic alarm. To deactivate,
press the control again, or turn the ignition to ON.
Press this control to unlatch the trunk or liftgate
(wagon only).
The interior lights will turn on when the remote is used to unlock the doors or sound
the panic alarm. The interior lights will turn off if the ignition switch is turned to the ON
position, or after 25 seconds of illumination. The dome lamp control must not be set to
the OFF position for the illuminated entry system to operate. The remote-control entry
features only operate with the ignition in the LOCK position.
SecuriLock™ Passive Anti-Theft System
The SecuriLock passive anti-theft system is an engine immobilization system. This system
prevents the engine from being started unless a coded key programmed to your vehicle is
used. Please note that for security purposes, your coded keys cannot be copied. If you
would like spare coded keys, they can be purchased from your dealership.
Keyless Entry System (if equipped)
With this control you can unlock the trunk/liftgate or lock/unlock the doors without
using a key. First, enter your five-digit program code, which will unlock the driver's door
only, and then press the corresponding quick key:
Side View Mirror Control
Move the mirror selector control to L to adjust the left mirror, or R to
adjust the right mirror. Next, move the mirror control in the direction you
wish to tilt the mirror. Return the selector control to the center position
to lock the mirrors in place.
Additional Features
Service
Engine Soon
Warning Lamp Turn Signal &
Wiper/Washer Control
Headlamp and
Panel Dimmer
ControlABS
Warning
LampTraction
Control
(if equipped)
Audio
Systems
Gearshift/Overdrive
Control Automatic Climate
Control System
(if equipped)
Auxiliary
Power Point
Speed
Control
(if equipped)
Interior
Trunk Control
(if equipped)
1
MERCURY SABLE
2
378
9
10
11
12
1
7
8
9
10
12
13
14
15
2
3
4
5
6Hood
Release
Brake
Release
13
Unlock all doors and the liftgate (wagon only)...3-4
Unlock the trunk or liftgate (wagon only)..........5-6
Lock all doors...............7-8 and 9-0 simultaneously
11
Power Adjustable
Foot Pedals
(if equipped)
4
14 15
6
5Hazard
Flasher Control
Sable_Ref_Guide.qxd 10/27/03 11:30 AM Page 7