ECO mode Mercury Villager 1996 s User Guide

220
[AS30360(ALL)06/95]
How to locate a selection on your CD Changer using
Automatic Music Search
[AS30380(ALL)06/95]
Automatic Music Search allows you to quickly find a particular
selection on the selected disc. Press the left (
b) side of the
ªSEEKº button to locate a previous track or the right (
a) side
of the ªSEEKº button to locate a later selection.
[AS30405(ALL)06/95]
How to fast forward or rewind your CD Changer
[AS30425(ALL)06/95]
To quickly search for a particular point in a selection, press and
hold the ªREWº button. Holding this button for more than
three seconds causes the CD mechanism to reverse at a faster
speed. The audio level will drop and the elapsed time will be
displayed during the fast reverse period.
[AS30445(ALL)06/95]
Pressing the ªFFº button functions the same as the ªREWº
button except in the opposite direction.
[AS30450(ALL)06/95]
Howtoswitchdiscs
[AS30465(ALL)06/95]
To switch discs while in the CD mode, press the ªTUNE
DISCSº button. Press the left (
b) side to play the previous disc.
Press the right (
a) to play the next disc.
[AS30475(ALL)06/95]
When you have reached the end of the disc by keeping the fast
forward (ªFFº) button pressed, the display will show the end
time of the last track and the sound will be muted. When the
fast forward (ªFFº) button is released, the player resumes play
at the beginning of the first track.
*
[AS30550(ALL)04/95]
Using the ªSCANº function
[AS30575(ALL)06/95]
Press the ªSCANº button to enter the scan mode. The CD
changer will begin scanning the disc, stopping on each listenable
track for approximately a ten-second sampling. This continues
until you press the ªSCANº button a second time or eject the
disc. While in the scan mode, the track number flashes in the
display.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

Electronic Sound Systems
221
*
[AS30600(ALL)07/94]
Special Features of Your CD Player
[AS30650(ALL)07/94]
Compression
*
[AS30675(ALL)04/95]
The compression feature will bring soft and loud passages closer
together for a more consistent listening level.
[AS30700(ALL)06/95]
To turn the compression on, press the ªCOMPº button. When
on, the compression indicator (ªCº) will appear in the display.
Press the button again to turn off.
[AS30750(ALL)07/94]
Shuffle
[AS30850(ALL)06/95]
Press the ªSHUFFLEº button to turn on. Press it again to turn
off. When the shuffle mode is activated, the display will show
ªSHFº for two seconds. When a new track is selected by the
shuffle feature, ªSHFº will again be displayed for two seconds.
[AS30875(ALL)07/94]
Shuffle and Scan
[AS30900(ALL)06/95]
Both the shuffle and scan features can be activated
simultaneously. In this mode, the player will randomly pick a
selection and play the first ten seconds. This process is
continued until either the ªSCANº button or ªSHUFFLEº button
is pressed a second time.
[AS31000(ALL)07/94]
How to Eject the Disc
[AS31050(ALL)06/95]
Push the eject button on the lower left corner of your CD
changer to stop play, eject the magazine and resume radio or
tape operation of your audio system.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

226
[AS32720(ALL)06/95]
How to Use Your Steering Wheel Audio
Controls (If equipped)
[AS32740(ALL)06/95]
If your vehicle is equipped with steering wheel audio controls,
the controls are located on the inner right rim of the steering
wheel. These controls duplicate some of the audio functions.
[AS32760(ALL)06/95]
How to adjust volume
[AS32780(ALL)06/95]
Press the up arrow button (G) to increase the volume.
[AS32800(ALL)06/95]
Press the down arrow button (H) to decrease the volume.
[AS32820(ALL)06/95]
Using the ªNEXTº button
[AS32840(ALL)06/95]
This control has different functions for each source (mode). In
the radio mode, the radio will cycle through the memory
presets for the given frequency band. In cassette mode, the tape
advances to the next selection. In CD mode, the CD will move
to the next track on the given disc.
*
[AS35200(ALL)06/95]
Common Radio Reception Conditions
[AS35300(ALL)03/93]
Several conditions affect FM reception and can result in noise or
interference in the reception. These are:
[AS35400(ALL)03/93]
Distance/Strength
[AS35500(ALL)05/94]
The strength of the FM signal is directly related to the distance
the signal must travel. The listenable range of an average FM
signal is approximately 25 miles (40 km). Beyond this distance,
the radio is operating in a ªfringeº area and the signal becomes
weaker.
[AS35600(ALL)03/93]
Terrain
[AS35700(ALL)05/94]
The terrain (hills, mountains, tall buildings) of the area over
which the signal travels may prevent the FM signal from being
noise-free.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

232
*
[DR03700(ALL)02/95]
The transaxle will be in the ªoverdrive onº mode when the
vehicle is started even if the O/D OFF mode was selected when
the vehicle was last shut off.
[DR03800(ALL)04/94]
If your vehicle is on an extremely slippery surface, the
Electronic Transaxle Control Module may receive a signal
indicating a rapid increase or decrease in wheel speed. If the
module detects this condition, it will limit the transaxle
operation to Third gear and Reverse. This reduces tire slippage
and protects the transaxle. The transaxle will operate normally
in Reverse, but will lack power during acceleration in Drive. If
this happens, stop your vehicle as soon as possible and turn the
ignition off for 3 seconds. Restart the vehicle. If the condition
still exists, contact your dealer as soon as possible.
*
[DR03900(ALL)04/95]
NOTE: If the O/D OFF indicator light is flashing on and off
repeatedly when the vehicle is started, there is a
transaxle electronic system malfunction. Contact your
dealer as soon as possible.
*
[DR04000(ALL)06/95]
When to use 2 (Second)
[DR04100(ALL)01/93]
Use Second (2) when driving on slippery roads or to provide
additional engine braking on downgrades. This position
provides Second gear operation only. Do not exceed 68 mph
(110 km/h) in this position.
*
[DR04200(ALL)06/95]
When to use 1 (First)
[DR04300(ALL)01/93]
Use First (1) to provide maximum engine braking on steep
downgrades. Upshifts from First can be made by manually
shifting to Second (2) or Overdrive (D). First (1) gear provides
only first gear operation. If you select First while driving at
higher speeds, the transaxle will shift to Second (2), and then
shift back to First (1) after the vehicle decelerates to the proper
speed. Do not exceed 35 mph (56 km/h) in this position.
File:11vxdrn.ex
Update:Tue Jun 4 11:42:50 1996

236
[DR07350(ALL)04/94]
Ford Motor Company has not found any negative effects of
mobile radio transmitting equipment installed on vehicles with
the ABS system providing that the radio is installed according
to the radio manufacturer's instructions. However, if you have
had a mobile radio transmitter installed and the check ABS light
comes on (at any time other than immediately after turning the
key to the ON position) have your mobile radio dealer inspect
the installation. Also, if the ABS system is activated other than
during maximum braking, have your mobile radio installation
checked.
*
[DR07400(ALL)12/89]
If Brakes Do Not Grip Well or Pedal is ªLowº
*
[DR07500(ALL)01/93]
If the brake pedal seems ªlowº it may indicate the need for a
brake system inspection and/or service. Apply your parking
brake several times. If the condition has not improved, you
should have your brakes checked as soon as possible.
%*
[DR07600(ALL)01/93]
Occasional brake squeal during light to moderate stops does not
affect the function of the brake system and is normal. However,
if the squeal becomes very loud or if it becomes more frequent,
return the vehicle to your dealer for inspection.
*
[DR07700(ALL)11/89]
RWARNING
Modifications to the suspension spring rates and/or
vehicle ride height may adversely affect vehicle stopping
ability.
%*
[DR07800(ALL)01/93]
Stopping Distances
*
[DR07900(ALL)01/93]
Stopping distances vary with different loads and driving
conditions. Use caution when you drive under new conditions
and acquaint yourself with your vehicle's performance.
File:11vxdrn.ex
Update:Tue Jun 4 11:42:50 1996

308
%*
[SV12100(ALL)05/95]
Running Out of Fuel
*
[SV12150(ALL)06/95]
NOTE: Avoid running out of fuel because this situation may
have an adverse effect on modern powertrain
components.
*
[SV12300(ALL)07/95]
You may need to crank the engine several times before the fuel
system starts to pump fuel from the tank to the engine.
%*
[SV12400(ALL)05/95]
Fuel Economy
*
[SV12450(ALL)05/95]
Fuel economy is an estimate of the efficiency of your vehicle,
and can be calculated as Miles Per Gallon (MPG) or Liters Per
100 Kilometers (L/100K).
*
[SV12460(ALL)05/95]
Do not calculate fuel economy during your vehicle's break-in
period. This would not be an accurate estimate of how much
fuel your vehicle will normally use.
*
[SV12475(ALL)05/95]
To calculate fuel economy:
*
[SV12505(ALL)05/95]1.
Fill the fuel tank completely and record the initial odometer
reading.
*
[SV12550(ALL)05/95]2.
Every time you buy fuel, record the amount (in gallons or
liters) purchased.
*
[SV12605(ALL)05/95]3.
After at least 3-5 tankfuls, fill the fuel tank and record the
final odometer reading.
*
[SV12650(ALL)10/95]4.
Use these equations to calculate your fuel economy:
*
[SV12705(ALL)10/95]
n
English: MPGU(total miles driven)V(gallons used)
[SV12750(ALL)06/95]
n
Metric: L/100kUMultiply the number of liters used by 100
and divide the answer by the number of kilometers
travelled.
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

364
*
[SV44300(ALL)01/95]
Do not drive your vehicle if it does not operate properly. See
your dealer if the engine runs on for more than five seconds
after you shut it off or if it misfires, surges, stalls, or backfires.
*
[SV44400(ALL)11/93]
Information about your vehicle's emissions control system is on
the Vehicle Emission Control Information decal located on or
near the engine. This decal identifies engine displacement and
gives some tune-up specifications.
%*
[SV44405(ALL)07/95]
Readiness for Inspection/Maintenance Testing
*
[SV44410(ALL)07/95]
In some localities it may become a legal requirement to pass an
Inspection/Maintenance (I/M) test of the On-Board Diagnostic
(OBD) II system. If the vehicle's powertrain system or its battery
has just been serviced, the OBD II system is reset to a not ready
for I/M testing condition. To prepare for I/M testing, the law
specifies a ªneed for additional mixed city and highway driving
to complete the checkº of the OBD II system. As soon as all of
the OBD II system checks are successfully completed, the OBD
II system is set to the ready condition. The amount of driving
required to reach the ready condition varies with individual
driving patterns. To complete this requirement in the minimum
amount of time, refer to the OBD II Drive Cycle defined below.
If the vehicle owner cannot or does not want to do the
additional driving required by law, a service center can perform
this drive cycle as it would any other type of repair work.
*
[SV44415(ALL)09/95]
OBD II Drive Cycle
*
[SV44420(ALL)06/95]
The following steps must be run in the order shown. If any
steps are interrupted, repeat the preceding step. Any safe
driving mode is acceptable between steps.
*
[SV44425(ALL)06/95]
Always drive vehicle in safe manner according to traffic
conditions and obey all traffic laws.
*
[SV44430(ALL)07/95]
The engine must be warmed up and at operating temperature
before proceeding with the drive modes of the following OBD II
Drive Cycle.
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

Servicing Your Villager
365
*
[SV44435(ALL)06/95]1.
Start the engine. Drive or idle (in neutral) the vehicle for 4
minutes.
*
[SV44440(ALL)06/95]2.
Idle the vehicle in drive for 40 seconds.
*
[SV44445(ALL)07/95]3.
Accelerate the vehicle to 45 mph (70 km/h) at 1/4 to 1/2
throttle for 10 seconds.
*
[SV44450(ALL)07/95]4.
Drive the vehicle with a steady throttle at 45 mph
(70 km/h) for 30 seconds.
*
[SV44455(ALL)06/95]5.
Idle the vehicle in drive for 40 seconds.
*
[SV44460(ALL)07/95]6.
Continue to drive the vehicle in city traffic at speeds
between 25 and 40 mph (40-60 km/h) for 15 minutes.
During the 15 minute drive cycle the following modes must
be achieved:
*
[SV44465(ALL)07/95]
a. at least 5 stop and idle modes at 10 seconds each
*
[SV44470(ALL)07/95]
b. acceleration from idles at 1/4 to 1/2 throttle position, and
*
[SV44475(ALL)07/95]
c. choose 3 different speeds to do 1.5 minute steady state
throttle drives.
*
[SV44480(ALL)07/95]7.
Accelerate the vehicle up to between 45 and 60 mph
(70-100 km/h). This should take approximately 5 minutes.
*
[SV44485(ALL)07/95]8.
Drive vehicle and hold the throttle steady at the selected
speed between 45 and 60 mph (70-100 km/h) for
approximately 5 minutes.
*
[SV44490(ALL)07/95]9.
Drive the vehicle for 5 minutes at varying speeds between 45
and 60 mph (70-100 km/h).
*
[SV44492(ALL)07/95]10.
Bring the vehicle back to idle. Idle in Drive for 40 seconds.
*
[SV44494(ALL)07/95]11.
OBD II drive cycle has been completed. Vehicle can be
turned off when convenient.
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996