display Mercury Villager 1996 s User Guide

Instrument Panel Controls
107
[IP10480(ALL)06/95]
P
[IP10490(ALL)06/95]
Push this button for airflow to the floor and windshield at the
same time. ThePindicator light illuminates, and the display
window shows the set temperature. However, the air is not
cooled regardless of the temperature setting unless the A/C
button is pushed.
[IP10500(ALL)06/95]
V
[IP10510(ALL)06/95]
Press this button to obtain maximum airflow to the windshield.
Adjust the temperature setting as required for defrosting. The
Vindicator light illuminates and the display window shows
the set temperature. When the outside temperature is about50ÊF
(10ÊC) the air conditioningfunctions in order to dehumidify the
air to prevent window fogging.
[IP10520(ALL)06/95]
Q
[IP10530(ALL)06/95]
Push this button to select airflow through the instrument panel
registers. TheQindicator light illuminates and the display
window shows the set temperature. The ATC heats the air if the
selected temperature is warmer than the outside air coming into
the vehicle. However, the air is not cooled regardless of the
temperature setting unless the A/C button is pushed.
[IP10540(ALL)06/95]
S
[IP10550(ALL)06/95]
Push this button for air from the floor and instrument panel
registers at the same time. TheSindicator light illuminates
and the display window shows the set temperature. The ATC
heats the air if the selected temperature is warmer than the
outside air coming into the vehicle. However, the air is not
cooled regardless of the temperature setting unless the A/C
button is pushed.
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996

108
[IP10560(ALL)06/95]
R
[IP10570(ALL)06/95]
Push this button to direct airflow to the floor. TheRindicator
light illuminates and the display window shows the set
temperature. The ATC heats the air if the selected temperature
is warmer than the outside air coming into the vehicle.
However, the air is not cooled regardless of the temperature
setting unless the A/C button is pushed.
[IP10580(ALL)06/95]
Air Conditioning and Air Recirculation
[IP10590(ALL)06/95]
Activate the air conditioning in any of the function selector
override modes by pressing the A/C button. The A/C indicator
light on the button illuminates to verify activation, and cooled
air flows from the vents. Fan speed continues to be controlled
by the ATC unless the fan speed thumbwheel is used to
override the ATC.
[IP10600(ALL)06/95]
Press theMbutton to choose air recirculation. In this mode
the ATC system recirculates the air inside the vehicle rather
than drawing air from outside. Use this mode together with the
air conditioning to rapidly cool the inside of the vehicle or to
dehumidify the air inside the vehicle.
[IP10610(ALL)06/95]
Rear Passenger Compartment Climate Control System
with Front Passenger ATC
[IP10620(ALL)06/95]
If your vehicle is equipped with ATC, the rear passenger
compartment will also have climate controls so that rear seat
occupants can select their own personal climate comfort level.
[IP10630(ALL)06/95]
The rear seat climate control system is controlled from the main
ATC system on the instrument panel. If the front ATC system is
off, the rear system will also be off. Also, if the rear seat climate
control lever is set in OFF, the rear climate controls are turned
off.
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996

210
[AS00875(ALL)03/93]
Radio Controls
[AS00900(ALL)06/95]
NOTE: The antenna will be in the up position when the
radio is playing and in the down position when the
radio is off or if a cassette or CD (if equipped with
CD changer) is playing.
*
[AS01500(ALL)06/95]
How to turn the radio on and off
[AS01600(ALL)06/95]
Press the VOL-PUSH ON knob or the ªAM/FMº button to turn
on the radio. Press the ªVOL-PUSH ONº knob again to turn it
off.
*
[AS01625(ALL)06/95]
How to adjust the volume
[AS01650(ALL)06/95]
Turn the ªVOL-PUSH ONº knob to increase/decrease volume.
Bars illuminate in the display to show the relative volume level.
*
[AS01675(ALL)06/95]
NOTE: If the volume level is set above a certain listening
level when the ignition switch is turned off, when the
ignition switch is turned back on, the volume will
come back to a ªnominalº listening level. However, if
the radio power is turned off, the volume will remain
in the position it was set at when radio power is
switched back on.
*
[AS01700(ALL)06/95]
Selecting the AM or FM frequency band
[AS01800(ALL)06/95]
Push the ªAM/FMº button to select the desired frequency band.
When in the radio mode, pushing the button more than once
will alternate between AM, FM1 and FM2. These functions are
used with the station memory buttons described underHow to
tune radio stations.
%*
[AS01900(ALL)05/95]
How to tune radio stations
[AS02000(ALL)06/95]
There are four ways for you to tune in to a particular station on
the radio. You can manually locate the station by using the
ªTUNEº function, ªSEEKº to the station, ªSCANº to the station
or select the station by using the memory buttons, which you
can set to any desired frequency.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

212
*
[AS03400(ALL)06/95]2.
Press one of the memory preset buttons and hold the button
until the sound returns. That station is now held in memory
on that button.
*
[AS03500(ALL)06/95]3.
Follow the two steps above for each station memory preset
button you want to set.
[AS03550(ALL)06/95]
NOTE: If the vehicle's battery is disconnected, the Station
Memory Preset buttons will need to be reset.
[AS03600(ALL)06/95]
n
Using the Automatic Memory Store feature (Supersound
only)
[AS03900(ALL)06/95]
Activate Auto Memory Store by pushing the ªAUTO SETº
button once. Your radio will set the first six strong stations
of the band you are in (AM, FM1 or FM2) into the memory
buttons. The display will show ªAUTO,º then run through
the frequencies, stopping momentarily on the stations being
set into the memory buttons. The radio is now in the
ªAUTOº mode and this display will show ªAUTOº each
time a preset selected by ªAUTO SETº is activated.
*
[AS03950(ALL)06/95]
With Auto Memory Store, you can continually set strong
stations into your memory buttons without losing your
existing memory presets, which is especially handy while
traveling. Your radio will automatically set your memory
buttons to the strong local stations so you don't have to
continually manually tune to existing stations.
*
[AS04000(ALL)06/95]
NOTE: If there are fewer than six strong stations in the
frequency band, the remaining unfilled buttons will
store the last strong station detected on the band.
*
[AS04100(ALL)05/95]
After all stations have been filled, the radio will begin
playing the station stored on memory button 1.
[AS04200(ALL)06/95]
To deactivate the Auto Memory Store mode and return to
the manually-set memory button stations, simply push the
ªAUTO SETº button. Display will show ªAUTOº then
ªOFF.º
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

Electronic Sound Systems
213
[AS04450(ALL)06/95]
Using the ªBASSº and ªTREBº buttons to adjust the
tone balance and speaker output
[AS04475(ALL)06/95]
Push the top of the ªBASSº button to increase the bass response
and push the bottom of the ªBASSº button to decrease the bass
response. The display will show ªBASSº and the volume
indicators will show the bass level.
[AS04750(ALL)06/95]
Push the top of the ªTREBº button to increase the treble
response and push the bottom of the ªTREBº button to decrease
the treble response.
[AS04900(ALL)03/93]
Adjusting Speakers
[AS05100(ALL)03/93]
Adjusting speaker balance
[AS05200(ALL)06/95]
Balance control allows you to adjust the sound distribution
between the right and left speakers. Push the top of the ªBALº
button to shift the sound to the right speakers, and push the
bottom of the ªBALº button to shift the sound to the left
speakers.
[AS05300(ALL)03/93]
Adjusting speaker fader
[AS05400(ALL)06/95]
Fade control allows you to adjust the sound distribution
between the front and rear speakers. Push the top of the
ªFADEº button to shift the sound to the front speakers, and
push the bottom of the ªFADEº button to shift the sound to the
rear speakers.
*
[AS05500(ALL)06/95]
NOTE: Illuminated bars in the display show relative levels of
bass and treble, and positions of speaker balance and
fader functions (left to right, front to rear).
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

214
[AS10000(ALL)03/93]
Cassette Tape Player Controls
*
[AS10300(ALL)06/95]
How to insert a tape
[AS10400(ALL)06/95]
Your cassette tape player is equipped with power loading. Once
you insert a tape and push slightly (with theopen edge to the
right), the loading mechanism draws the tape the rest of the
way in and play will begin after a momentary tape tightening
process.
[AS10500(ALL)06/95]
NOTE: A cassette tape can be loaded with the ignition on
whether or not the radio power is on. Inserting a
cassette tape with the radio power off will turn the
audio system on. After the cassette is ejected, the
audio system will turn off. Also, the antenna will be
in the down position whenever the radio is not
playing (i.e., when a cassette or compact disc is
playing or when the radio power is off).
[AS10600(ALL)03/93]
How to locate a desired selection on the tape
[AS10700(ALL)05/94]
There are four ways to locate a desired selection on the tape.
You can use the fast forward, rewind, ªSEEKº or ªSCANº
function. Following are brief descriptions of each.
[AS10800(ALL)05/94]1.
Fast forwarding the tape
[AS10900(ALL)06/95]
To fast forward the tape, press the ªFFº button. The ª
Xº
display blinks while the tape fast forwards. The radio will
automatically begin playing until fast forward is manually
stopped (by pressing ªFFº button) or the end of the tape is
reached. (At the end of the tape, the direction automatically
reverses and plays the other side of the tape.)
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

Electronic Sound Systems
215
[AS11000(ALL)06/95]2.
Rewinding the tape
[AS11100(ALL)06/95]
To rewind the tape, press the ªREWº button. The ª
Xº
display blinks while the tape rewinds. The radio will
automatically begin playing until rewind is manually
stopped (by pushing the ªREWº button) or the beginning of
the tape is reached.
[AS11200(ALL)05/94]3.
Using the ªSEEKº function with a cassette tape
[AS11300(ALL)06/95]
While in the tape mode, push the right (
a) side of the
ªSEEKº button to seek forward to the next selection on the
tape. Push the left (
b) side of the ªSEEKº button to seek
the previous tape selection. The ªTAPEº display blinks.
*
[AS11400(ALL)11/93]
NOTE: If you want to restart a currently playing tape
selection, press the left (
b) side of the ªSEEKº button
after three seconds into the current selection.
[AS11500(ALL)06/95]4.
Using the ªSCANº button to scan cassette selections
[AS11600(ALL)06/95]
Press the ªSCANº button to enter the scan mode (display
blinks ªSCº) to begin the forward scan mode on the tape
currently playing, stopping on each tape selection for a
five-second sampling.
[AS11650(ALL)06/95]
The scan mode continues to the other side of the tape after
one side of the tape has been played completely.
[AS11800(ALL)06/95]
To stop the scan mode on the presently sampled tape
selection, press the ªSCANº button again, or press ªTAPE,º
ªCDº (if equipped), ªTUNE,º or ªSEEK.º
[AS11900(ALL)03/93]
Reversing the direction
[AS12000(ALL)06/95]
The alternate track of the tape can be selected anytime by
pressing the ªSIDE 1-2º button.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

216
*
[AS12100(ALL)02/95]
How to eject the tape
[AS12200(ALL)06/95]
To stop the tape and eject the cassette, press the ªEJº button.
The radio will resume playing if the radio power is on. The
tape cartridge can be ejected with radio power (and/or ignition)
on or off.
*
[AS12300(ALL)06/95]
How to store the tape
[AS12400(ALL)06/95]
Press the ªAM/FMº button to stop the tape player and resume
radio play. Similarly, press the ªCDº button to stop the tape
player and resume CD play. Also, pressing the ªTAPEº button
while the tape is playing pauses tape play.
[AS12450(ALL)06/95]
The ª
Xº symbol displays to indicate there is a tape in the
player. The symbol will be lit until you push the ªTAPEº buton
to resume tape play.
[AS12500(ALL)03/93]
Using the Dolby B noise reduction feature
*
[AS12700(ALL)06/95]
NOTE: Noise reduction system manufactured under license
from Dolby Labs Licensing Corporation. ªDolbyº and
double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
[AS12750(ALL)04/95]
Push thekbutton to activate Dolby B noise reduction. When
on, theksymbol will appear in the display.
[AS12800(ALL)03/93]
Tips on caring for your cassette player and tapes
*
[AS12900(ALL)02/95]
In order to keep your cassette tape player performing the way it
was meant to, read and follow these simple precautions:
*
[AS13000(ALL)02/95]
n
Only cassettes that are 90 minutes long or less should be
used. Tapes longer than 90 minutes are thinner and subject
to breakage or may jam the tape player mechanism.
*
[AS13100(ALL)02/95]
n
Protect cassettes from exposure to direct sunlight, high
humidity and extreme heat or cold. If they are exposed to
extreme conditions, allow them to reach a moderate
temperature before playing.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

Electronic Sound Systems
217
*
[AS13200(ALL)02/95]
n
Loose labels on cassette tapes can become lodged in the
mechanism. Remove any loose label material before inserting
a cassette.
*
[AS13300(ALL)02/95]
n
If a tape is loose inside the cassette, tighten it before playing
by putting your finger or a pencil into one of the holes and
turning the hub until the tape is tight.
[AS13400(ALL)03/93]
n
Using a Ford Cassette Cleaning Cartridge to clean the tape
player head after 10-12 hours of play will help maintain the
best playback sound and proper tape operation.
%*
[AS29753(ALL)03/95]
Clock Operation
[AS29756(ALL)07/94]
How to View the Clock Mode
[AS29759(ALL)06/95]
Press the ªCLº button to alternate the frequency/tape/CD (if
equipped) and time in the display. In the clock mode, pressing
any radio/tape/CD (if equipped) function will automatically
display the radio frequency/tape/CD (if equipped) for
approximately ten seconds before changing back to the clock
mode.
[AS29762(ALL)07/94]
How to Set the Clock
[AS29765(ALL)06/95]1.
Turn the ignition on (clock can be set when radio is on or
off).
[AS29768(ALL)06/95]2.
Press and hold in the ªCLKº button, press the ªSEEKº
button left (
b) to advance the hours and right (
a)to
advance the minutes.
[AS29771(ALL)03/93]
NOTE: The clock displays 12-hour time with no A.M./P.M.
indications.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

Electronic Sound Systems
219
[AS29880(ALL)06/95]
NOTE: In some instances, the radio may have CD changer
controls, even if there is no CD changer.
[AS29905(ALL)06/95]
The digital display on the radio shows the disc and track
number. Indicators for compression on (ªCOMPº) and shuffle
on (ªSHUFFLEº) are also in the display. These features are
described in more detail later in this chapter.
[AS29925(ALL)06/95]
Once a magazine is inserted, operation of the CD changer will
override that of the cassette player or radio.
[AS29940(ALL)06/95]
NOTE: The volume, bass, treble, balance, and fader controls
on the radio are also used with the CD changer.
[AS29960(ALL)06/95]
Slide the CD door all the way to the right. Insert the magazine
into the magazine opening. If a magazine is already loaded,
pressing ªCDº will start CD play. For the first three seconds
after a disc starts playing, the radio display shows the disc
number (CD-01 for disc 1). From seconds four through six, the
track number is shown (TR-02 for track 2). For the remainder of
the track, the display shows the disc and track number (01-02
for disc 1, track 2).
[AS30100(ALL)06/95]
When the disc reaches the end, the disc changer automatically
goes to the beginning of the next disc and resumes playing.
[AS30120(ALL)06/95]
How to eject the CD magazine
[AS30140(ALL)06/95]
Press the eject button on the lower left of the CD changer to
eject the magazine whether or not the audio system is on.
[AS30300(ALL)06/95]
NOTE: If the ignition key is turned OFF during play and
then is set to the ON or ACCESSORY position, the
CD changer will resume playing in the mode
(radio/tape/CD) it was in when ignition was turned
off.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996