display Mercury Villager 1996 s Owner's Guide

220
[AS30360(ALL)06/95]
How to locate a selection on your CD Changer using
Automatic Music Search
[AS30380(ALL)06/95]
Automatic Music Search allows you to quickly find a particular
selection on the selected disc. Press the left (
b) side of the
ªSEEKº button to locate a previous track or the right (
a) side
of the ªSEEKº button to locate a later selection.
[AS30405(ALL)06/95]
How to fast forward or rewind your CD Changer
[AS30425(ALL)06/95]
To quickly search for a particular point in a selection, press and
hold the ªREWº button. Holding this button for more than
three seconds causes the CD mechanism to reverse at a faster
speed. The audio level will drop and the elapsed time will be
displayed during the fast reverse period.
[AS30445(ALL)06/95]
Pressing the ªFFº button functions the same as the ªREWº
button except in the opposite direction.
[AS30450(ALL)06/95]
Howtoswitchdiscs
[AS30465(ALL)06/95]
To switch discs while in the CD mode, press the ªTUNE
DISCSº button. Press the left (
b) side to play the previous disc.
Press the right (
a) to play the next disc.
[AS30475(ALL)06/95]
When you have reached the end of the disc by keeping the fast
forward (ªFFº) button pressed, the display will show the end
time of the last track and the sound will be muted. When the
fast forward (ªFFº) button is released, the player resumes play
at the beginning of the first track.
*
[AS30550(ALL)04/95]
Using the ªSCANº function
[AS30575(ALL)06/95]
Press the ªSCANº button to enter the scan mode. The CD
changer will begin scanning the disc, stopping on each listenable
track for approximately a ten-second sampling. This continues
until you press the ªSCANº button a second time or eject the
disc. While in the scan mode, the track number flashes in the
display.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

Electronic Sound Systems
221
*
[AS30600(ALL)07/94]
Special Features of Your CD Player
[AS30650(ALL)07/94]
Compression
*
[AS30675(ALL)04/95]
The compression feature will bring soft and loud passages closer
together for a more consistent listening level.
[AS30700(ALL)06/95]
To turn the compression on, press the ªCOMPº button. When
on, the compression indicator (ªCº) will appear in the display.
Press the button again to turn off.
[AS30750(ALL)07/94]
Shuffle
[AS30850(ALL)06/95]
Press the ªSHUFFLEº button to turn on. Press it again to turn
off. When the shuffle mode is activated, the display will show
ªSHFº for two seconds. When a new track is selected by the
shuffle feature, ªSHFº will again be displayed for two seconds.
[AS30875(ALL)07/94]
Shuffle and Scan
[AS30900(ALL)06/95]
Both the shuffle and scan features can be activated
simultaneously. In this mode, the player will randomly pick a
selection and play the first ten seconds. This process is
continued until either the ªSCANº button or ªSHUFFLEº button
is pressed a second time.
[AS31000(ALL)07/94]
How to Eject the Disc
[AS31050(ALL)06/95]
Push the eject button on the lower left corner of your CD
changer to stop play, eject the magazine and resume radio or
tape operation of your audio system.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

224
[AS32400(ALL)06/95]
Rear Seat Radio Control Operation
[AS32410(ALL)06/95]
13-1/2 pica
art:0040313-A
Rear seat radio controls
*
[AS32420(ALL)06/95]
How to turn the rear seat radio controls on and off
[AS32440(ALL)06/95]
Press memory preset buttons ª3º and ª5º simultaneously on the
face of your radio to turn the rear seat radio controls on. A
headphones symbol (j) will appear in the display when the
rear seat controls are on. Press ª3º and ª5º simultaneously
again to turn rear seat radio controls off.
*
[AS32460(ALL)06/95]
How to adjust the volume
[AS32480(ALL)06/95]
Press the right (R) side of the ªVOLUMEº rocker switch to
increase volume, and push the left (s) side to decrease the
volume of the rear speakers.
[AS32500(ALL)06/95]
NOTE: Rear seat control volume can be set no higher than
current radio setting.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

Electronic Sound Systems
227
*
[AS35900(ALL)01/95]
If there is a building or large structure between the antenna and
station, some of the signal ªbendsº around the building, but
certain spots receive almost no signal. Moving out of the
ªshadowº of the structure will allow the station to return to
normal.
[AS36000(ALL)05/95]
This condition exists when the radio waves are reflected off
objects or structures; the reflected signal cancels the normal
signal, causing the antenna to pick up noise and distortion.
Cancellation effects are most prominent in metropolitan areas,
but also can becomes quite severe in hilly terrain and depressed
roadways.
[AS36100(ALL)03/93]
To minimize the effects of these conditions, a stereo/mono
blend circuit has been incorporated into this system. This feature
automatically switches a weak stereo signal to a clearer
monaural signal, which improves the quality of reception.
*
[AS36200(ALL)01/95]
Several sources of static are normal conditions on AM
frequencies. These can be caused by power lines, electric fences,
traffic lights and thunderstorms.
*
[AS36300(ALL)01/95]
Another reception phenomenon isStrong Signal Capture and
Overload. This can occur when listening to a weak station and
when passing another broadcast tower. The close station may
capture the more distant station, although the displayed
frequency does not change. While passing the tower, the station
may switch back and forth a few times before returning to the
original station.
*
[AS36400(ALL)01/95]
When several broadcast towers are present (common in
metropolitan areas) several stations may overload the receiver,
resulting in considerable station changing, mixing and
distortion.
*
[AS36500(ALL)01/95]
Automatic gain control circuitry for both AM and FM bands has
been incorporated into this system to reduce strong signal
capture and overload.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996

310
%*
[SV14600(ALL)02/95]
Engine Oil Recommendations
*
[SV14750(ALL)02/96]
We recommend using Motorcraft oil or an equivalent oil
meeting Ford Specification WSS-M2C153-F and displaying the
American Petroleum Institute CERTIFICATION MARK on the
front of the container.
*
[SV14850(ALL)03/95]
one third page
art:0060021-E
The API Certification Mark
*
[SV15000(ALL)01/95]
Neveruse:
*
[SV15100(ALL)01/95]
n
ªNon-Detergentº oils
*
[SV15200(ALL)04/95]
n
Oils labeled API SA, SB, SC, SD, SE, SF or SG
%*
[SV15300(ALL)01/95]
n
Additional engine oil additives, oil treatments or engine
treatments
%*
[SV15400(ALL)03/95]
Engine oils with an SAE 5W-30viscosity arePREFERREDfor
your vehicle. They provide the best engine performance, fuel
economy and engine protection for all climates down to-15ÊF
(-25ÊC).
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996