fog light Mercury Villager 1996 Owner's Manuals
[x] Cancel search | Manufacturer: MERCURY, Model Year: 1996, Model line: Villager, Model: Mercury Villager 1996Pages: 396, PDF Size: 3.67 MB
Page 93 of 396
Instrument Panel Controls
93
[IP02600(ALL)01/93]
Air Outlets
[IP02700(ALL)01/93]
Air intake selector button
[IP02800(ALL)09/93]
The typical air intake selection is outside air. However, for
recirculated air, the air intake selector button may be activated.
When the air intake selector button is activated (indicator light
is on), it prevents the intake of outside air. This is the typical
selection when using the air conditioner (if equipped). It
recirculates interior air for faster cooling. The recirculated air
function also helps to prevent the intake of dusty or unpleasant
air.
[IP02900(ALL)01/93]
There are several air outlets on the instrument panel. There are
side outlets near the driver's window and passenger's window,
two center outlets, floor outlets, and windshield outlets. The
direction and amount of air flow from the center and side
instrument panel outlets can be adjusted for personal comfort.
[IP02950(ALL)04/94]
NOTE: Selection of the recirculated air mode under cold and
humid conditions may result in window fogging due
to entrapped humidity within the vehicle. To
counteract this circumstance, switch to the Defrost
mode and set fan speed to 3 or 4. Adjust air
temperature to a ªwarmº instead of ªhotº setting.
[IP03000(ALL)06/95]
Heating Only System (Without air conditioning)
[IP03100(ALL)01/93]
You can heat and ventilate the inside of your vehicle, or defrost
the windshield with the function selector buttons, the fan speed
knob and the temperature control knob.
[IP03200(ALL)01/93]
An additional push-on/push-off air intake selector button
provides for the selection of recirculated inside air (button
lighted) or outside air (button not lighted).
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996
Page 95 of 396
Instrument Panel Controls
95
*
[IP04000(ALL)10/93]
To defrost the windshield and side windows:
[IP04100(ALL)01/93]
n
Press the Defrost button, turn the temperature control knob
to the WARM (red) area and turn the fan speed knob to the
position of your choice. The recirculated air feature will be
automatically turned off in this setting (outside air will be
provided).
[IP04150(ALL)04/94]
n
To reduce window fogging under extreme conditions, select
defrost and high fan speed while reducing temperature to a
ªwarmº instead of ªhotº setting. Slightly opening the rear
quarter windows may also help dry the interior window
surfaces.
*
[IP04200(ALL)10/93]
To heat and defrost at the same time:
[IP04300(ALL)01/93]
n
Press the Mix function selector button, turn the temperature
control knob and the fan speed knob to provide the
temperature and fan speed you prefer. The recirculated air
feature will be automatically turned off in this setting
(outside air will be provided).
[IP04600(ALL)06/94]
Controlling the Temperature in Your Vehicle
[IP04650(ALL)09/93]
n
To ventilate your vehicle with outside air, make sure that the
air intake selector button is set for outside air. Open the
instrument panel registers enough to provide the amount of
air desired for your comfort.
[IP04700(ALL)01/93]
n
To vary the temperature inside your vehicle, move the
temperature control knob toward WARM (red) for warmer
temperatures and toward COOL (blue) for cooler
temperatures. The temperature control knob setting
determines the temperature of the air being discharged from
the system in all operating modes (heating or A/C).
[IP04800(ALL)09/93]
n
Do not place objects under the front seats unless your
vehicle is equipped with an underseat storage compartment.
Improperly stored objects will interfere with the flow of air
to the back seats.
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996
Page 107 of 396
Instrument Panel Controls
107
[IP10480(ALL)06/95]
P
[IP10490(ALL)06/95]
Push this button for airflow to the floor and windshield at the
same time. ThePindicator light illuminates, and the display
window shows the set temperature. However, the air is not
cooled regardless of the temperature setting unless the A/C
button is pushed.
[IP10500(ALL)06/95]
V
[IP10510(ALL)06/95]
Press this button to obtain maximum airflow to the windshield.
Adjust the temperature setting as required for defrosting. The
Vindicator light illuminates and the display window shows
the set temperature. When the outside temperature is about50ÊF
(10ÊC) the air conditioningfunctions in order to dehumidify the
air to prevent window fogging.
[IP10520(ALL)06/95]
Q
[IP10530(ALL)06/95]
Push this button to select airflow through the instrument panel
registers. TheQindicator light illuminates and the display
window shows the set temperature. The ATC heats the air if the
selected temperature is warmer than the outside air coming into
the vehicle. However, the air is not cooled regardless of the
temperature setting unless the A/C button is pushed.
[IP10540(ALL)06/95]
S
[IP10550(ALL)06/95]
Push this button for air from the floor and instrument panel
registers at the same time. TheSindicator light illuminates
and the display window shows the set temperature. The ATC
heats the air if the selected temperature is warmer than the
outside air coming into the vehicle. However, the air is not
cooled regardless of the temperature setting unless the A/C
button is pushed.
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996