hood release Mercury Villager 1996 Owner's Manuals

Starting Your Villager
63
*
[ST09000(ALL)01/93]
For best results, plug the heater in at least three hours before
you start your vehicle. Using the heater for longer than three
hours will not damage the engine, so you can leave it plugged
in all night to start your vehicle the following morning.
%*
[ST09005(ALL)02/95]
What To Do If The Engine Does Not Start
%*
[ST09010(ALL)02/95]
Fuel Pump Shut-Off Switch
*
[ST09015(ALL)03/95]
If the engine cranks but does not start or does not start after a
collision, the fuel pump shut-off switch may have been
triggered. The shut-off switch is a device intended to stop the
fuel pump when your vehicle has been involved in a substantial
jolt.
*
[ST09020(ALL)03/95]
Once the shut-off switch is triggered, you must reset the switch
by hand before you can start your vehicle.
[ST09025(ALL)02/95]
The fuel pump shut-off switch reset button is located below the
hood release handle.
[ST09030(ALL)02/95]
10-1/2 pica
art:0040048-C
Fuel pump shut-off switch reset button location
File:04vxstn.ex
Update:Mon Jun 3 08:20:06 1996

298
%*
[SV03800(ALL)03/95]
Opening the Hood
[SV03900(ALL)01/93]1.
Pull the hood release handle, located below the fuse panel
door.
[SV04000(ALL)09/93]
13-1/2 pica
art:0040189-C
Hood release handle location
[SV04100(ALL)01/93]2.
Go to the front of the vehicle and release the hood latch
under the hood in the front center of the vehicle.
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

Servicing Your Villager
299
*
[SV04200(ALL)01/93]3.
Lift the hood and release the prop rod from its retaining
clip. Place the end of the prop rod in the prop rod hole
provided on the underside of the hood.
[SV04300(ALL)04/95]
24 pica art:0040190-C
The hood latch and prop rod
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

394
H
Hazard flashers.................... 112
Headlamps
aiming....................... 348
bulb specification.................. 355
checking alignment................. 348
cleaning...................... 114
daytime running lights............... 114
high beam..................... 124
replacing bulbs................... 348
warning chime.................... 77
Head restraints.................... 159
Heating, manual heating and air conditioning system.... 91
High beams
indicator light.................... 77
operation...................... 124
Hitch......................... 250
Hood
latch location.................... 298
lubrication specifications............... 368
release lever.................... 298
working under the hood............... 296
I
Identification Number, Vehicle (VIN)........277, 283
Idle
relearning...................259, 296
speed........................ 62
Ignition
chime........................ 58
positions of the ignition................ 57
removing the key................... 58
Infant seats (see Safety seats)............... 31
Instrument cluster.................... 67
electronic....................... 81
File:vxixn.ex
Update:Fri Jun 7 09:28:47 1996