fold seats Mercury Villager 1998 Owner's Manuals

Rear Seat Cupholders (available on some models)
Your vehicle may have the following types of cupholders:
mtwo second row cupholders attached to the captain seats (if
equipped)
mtwo third row cupholders on the left side and one cupholder
on the right side (if equipped)
mone cupholder built into the side trim panel (without rear
radio controls)
WARNING
Objects stored on the ledges below the rear side windows
can become dangerous projectiles during a sudden stop
or collision. Put small objects only in the storage
compartments.
Third Row Seat Storage Compartment (If equipped)
Your vehicle may come equipped with a folding cupholder/storage
tray/storage compartment built into the passenger's side of the
third row seat. Find the indented ledge on the right of the
cupholder and pull it up to reveal the storage compartment.
Power Point Electrical Outlet (If equipped)
Your vehicle may be equipped with a 12 volt power point outlet
located just below the rear seat audio controls. The power
point can be used in place of the cigarette lighter for optional
electrical accessories.
NOTE: Do not plug the cigarette lighter into this power point
electrical outlet. Use the cigarette lighter.
128

Installing the Two-Passenger Bench Seat
To replace the bench seat in its original position:
1. Make sure the area around the floor anchor positions is free
from obstruction.
2. With the seatback folded down, two people should lift the seat
into the vehicle.
3. Place the seat slightly behind the floor anchor positions and
catch the rear leg anchors into each anchor position.
4. Press down on the front of the seat to secure the front legs to
the two floor latch locks. Place the seatback in the upright
position.
5. Try to move the seat to be sure that it is securely fastened.
6. Always reattach the tongue into the auxiliary buckle mounted
to the sliding door side of the seat.
Labels have been provided on the side of the seat to remind you
of important safety precautions.
7. Replace any floor mats that were removed.
WARNING
Keep foreign objects out of the floor anchors. Objects in
the floor anchors could prevent front and rear seat legs from
engaging properly.
WARNING
Before sitting in the removable seats, make sure that the
seat legs are securely attached by the floor anchors.
186

The quick-release bucket seat also has two levers on the back of
the seat Ð one to fold down the seatback and one to slide
the seat forward. These levers allow third-row passengers to enter
and exit more easily.
Removable Captain Seats
If your vehicle has second row captain seats, you can remove
them if you need extra cargo space. With the second-row seats
removed, the third-row bench seat can be moved up to the second
row position for additional rear cargo area room. When the
third-row seat is moved to this position, passengers will use the
second-row safety belts.
To help prevent personal injury, at least two people are needed to
remove the seats.
Quick-release bucket seat levers
188

Before you remove the seats, remove the floor mats. Then:
1. Pull the seatback release lever up and tilt the back of the seat
forward as far as possible.
Folding down the seatback
Adjustable Rear Seating
189

Installing the Removable Captain Seats
To position the captain seats back in their original positions:
1. Make sure the area around the floor anchor positions is free
from obstruction.
2. With the seatback folded down, two people should lift the seat
into the vehicle.
3. Place the seat slightly behind the floor anchor positions and
catch the rear leg anchors into each anchor position.
4. Press down on the front of the seat to secure the front legs to
the two floor latch locks. Place the seatback in the upright
position.
5. Try to move the seat to be sure that it is securely fastened.
6. Replace any floor mats that were removed.
Labels have been provided on the side of the seats to remind you
of important safety precautions.
WARNING
Keep foreign objects out of the floor anchors. Objects in
the floor anchors could prevent front and rear seat legs from
engaging properly.
WARNING
Before sitting in the removable seats, make sure that the
seat legs are securely attached by the floor anchors.
192

Fold-Down Table-Top Seats (If equipped)
The second and third row seats convert to table tops with built-in
cupholders. Lift up on the seatback release lever and fold
seatback forward.
Seatback release lever location
204

WARNING
You should never place hard items such as coffee mugs or
drinking glasses on the table-top seats when the
vehicle is moving. Any item can become a projectile
inside a vehicle involved in a collision. To help prevent
personal injury, never leave loose items on the fold-down
table-top seats when the vehicle is moving.
Table and built-in cupholders on the fold-down seatback
Adjustable Rear Seating
205