torque Mercury Villager 1998 Owner's Manuals

16. Make sure the lug wrench is secured back into the tool kit and
store it next to the jack.
17. Unblock the wheels.
Retighten the lug nuts to the specified torque at 500 miles (800
km) of operation, after any wheel change, or any time the lug nuts
are loosened.
Storing the jack
Roadside Emergencies
267

After each rotation, adjust individual tire pressure as specified
on the Tire Pressure Decal. Tighten wheel lug nuts to the required
torque specification and retighten again after 500 miles (800
km).
If your vehicle has the optional full-size spare tire, you may
rotate the spare tire into the rotation pattern.
WARNING
If you use the temporary spare tire continuously or do not
follow these precautions, the tire could fail, causing
you to lose control of the vehicle.
If your vehicle has aluminum wheels, you may remove the full-
size spare tire from the wheel and remount it on an
aluminum wheel to rotate the spare tire into your vehicle's
rotation pattern.
Replacing the Tires
Replace tires that show wear bands. When your tire shows a
wear band, it has only 1/16 of an inch (1.59 mm) of tread left.
Rotating the tires
Maintenance and Care
301