jacking MINI Coupe 2012 Owner's Manual
[x] Cancel search | Manufacturer: MINI, Model Year: 2012, Model line: Coupe, Model: MINI Coupe 2012Pages: 218, PDF Size: 3.84 MB
Page 175 of 218

MOBILITYReplacing components
174
9.Pull the space-saver spare tire underneath
the vehicle out toward the rear.
10. Position the space-save r spare tire with the
valve facing upward.
11. Unscrew the valve extension from the valve
of the space-saver spare tire.
12. Unscrew the dust cap from the extension
and place it on the valve of the space-saver
spare tire.
Due to its different dimensions, the
damaged wheel cannot be placed in the
recess for the space-saver spare tire. <
Driving with the space-saver spare tire
Drive cautiously and do not exceed a
speed of 50 mph/80 km/h. Changes may
occur in vehicle handling such as lower track
stability during braking, longer braking dis-
tances and changes in self-steering properties
when close to the handling limit. These proper-
ties are more noticeable with winter tires. <
Only one space-saver spare tire may be
mounted at one time. Mount a wheel and
tire of the original size as soon as possible, to
avoid any safety risks. <
Check the tire inflat ion pressure at the
earliest opportunity an d correct it if neces-
sary. Replace the defective tire as soon as possi-
ble and have the new wheel/tire assembly bal-
anced. <
Preparing for a tire change
Observe the safety precautions regarding
flat tires on page 170.< Additional safety measures when
changing tires:
Only change the tire wh en parked on a surface
that is level, firm and not slippery.
The vehicle or the jack could slip sideways on
soft or slippery support surfaces, such as snow,
ice, flagstones, etc.
Do not use a wooden block or similar object as a
support base for the jack, as this would prevent
it from extending to its full support height and
reduce its load-carrying capacity.
Do not lie under the vehicle or start the engine
when the vehicle is supported by the jack; other-
wise, there is a risk of fatal injury. <
1. Place the foldable chock behind the front
wheel on the other side of the vehicle or in
front of the wheel if the vehicle is on an
incline. If the wheel is changed on a surface
with a more severe sl ope, take additional
precautions to secure the vehicle from
rolling.
2. Uncover the lug bolts if necessary.
3. Loosen the lug bolts by a half turn.
Jacking up the vehicle
The vehicle jack is designed for changing
wheels only. Do not attempt to raise
another vehicle model with it or to raise any load
of any kind. To do so could cause accidents and
personal injury. <
1. Place the jack at the jacking point closest to
the wheel.
Online Edition for Part no. 01 40 2 914 786 - \251 07/12 BMW AG
Page 176 of 218

Replacing componentsMOBILITY
175
The jack base must be perpendicular to the
surface beneath the jacking point.
2. During jacking up, insert the jack head in the
square recess of the jacking point.
3. Jack the vehicle up until the wheel you are
changing is raised off the ground.
Mounting the space-saver spare tire
1.Unscrew the lug bolts and remove the
wheel.
2. Remove accumulations of mud or dirt from
the mounting surfaces of the wheel and
hub. Clean the lug bolts.
3. Lift the new wheel into place.
4. Screw at least two lug bolts finger-tight into
opposite bolt holes.
5. Screw in the remaining bolts.
6. Tighten all the lug bolts firmly in a diagonal
pattern.
7. Lower the vehicle.
8. Remove the jack.
Tightening the lug bolts
Tighten the lug bolts in a diagonal pattern.
Immediately have the wheels checked
with a calibrated torque wrench to ensure
that the lug bolts are firmly seated. Otherwise,
incorrectly tightened lug bolts can present a
safety hazard. <
Tightening torque: 103.3 lb ft or 140 Nm.
Replace the defective tire as soon as possible
and have the new wheel/tire assembly
balanced.
Vehicle battery
Maintenance
The battery is maintenance-free; that is, the
electrolyte will last for the life of the battery
when the vehicle is operated in a temperate
climate.
Battery replacement
Only use vehicle batteries that have been
approved for your vehicle by the manu-
facturer; otherwise, the vehicle could be
damaged and systems or functions may not
be fully available. <
After a battery replacement, have the battery
registered on the vehicle by your MINI dealer to
ensure that all convenie nce functions are fully
available and, if nece ssary, the corresponding
Check Control messages are no longer dis-
played.
Charging the battery
Note
Do not connect battery chargers to the
sockets installed in the vehicle at the
factory; otherwise you may cause damage to
the battery. <
Only charge the battery in the vehicle when
the engine is off. Connections, refer to Jump-
starting on page 177.
General information
To guarantee the full service life of the battery,
ensure that the battery is always properly
charged.
It may be necessary to charge the battery in the
following situations:
>If frequent short trips are taken.
> If the vehicle is frequently parked for more
than a month.
Online Edition for Part no. 01 40 2 914 786 - \251 07/12 BMW AG
Page 212 of 218

Everything from A to ZREFERENCE
211
Initializing
– Flat Tire Monitor FTM80
Instrument lighting 92
Instrument panel, refer to
Cockpit 10
Instrument panel, refer to Displays 12
Integrated key 22
Interior lamps 92
– remote control 26
Interior rearview mirror 50
– automatic dimming feature 50
Interlock 58
Intermittent mode of the wipers 61
Internal care 163
Internet page 4
J
Jacking points 174
Jets, refer to Window washer nozzles 62
Jumpering, refer to Jump-
starting 177
Jump-starting 177
K
Key, refer to Keys/remote
controls 22
Keyless-Go, refer to Comfort
Access 31
Keyless opening and closing, refer to Comfort Access 31
Key Memory, refe r to Personal
Profile 22
Keypad dialing 134
Kickdown 58
– automatic transmission with Steptronic 58
Knock control 141
L
Lamps, refer to Parking lamps/
Low beams 88
Lamps and bulbs, replacing bulbs 166
Lashing eyes, refer to Securing
cargo 111
LATCH child restraint fixing system 52
Leather care 164
LEDs light-emitting diodes 166
Length, refer to
Dimensions 197
License plate lamp
– bulb replacement 170
Light alloy wheels, care 163
Light-emitting diodes LEDs 166
Lighter 101
– socket 101
Lighting
– lamps and bulbs 166
– of the instruments 92
– of vehicle, refer to Lamps 88
Light switch 88
Limit 193
Listening to test, scan
– radio MINI Boost CD 118
Load 110
Load securing equipment, refer to Secu ring cargo111
Lock buttons of doors, refer to
Locking 27
Locking
– adjusting confirmation
signal 25
– from inside 27
– from outside 25
– without remote control, refer to Comfort Access 31
Locking and unlocking doors
– confirmation signals 25
– from inside 27
– from outside 24 Longlife oils
– approved motor oils
157
Low beams 88
– automatic 88
– replacing bulb 167
Lower back suppo rt, refer to
Lumbar support 46
Luggage compartment
– emergency unlocking 29
– increasing the capacity 109
– opening from the inside 28
– refer to Cargo area 28
Luggage compartment lid
– emergency operation, see manual unlocking 28
– refer to Tailgate 28
Lumbar support 46
M
M+S tires, refer to Winter
tires 153
Maintenance, refer to Service and Warranty Information
Booklet for US models and
Service Guide Booklet for
Canadian models
Maintenance system 159
Malfunction
– convertible top 36,42
– tailgate 28
Malfunction warnings, refer to Check Control 73
Manual air distribution 96
Manual convertible top 39
Manually operated convertible
top 39
Manual mode
– automatic transmission with
Steptronic 59
Manual operation
– door lock 27
– fuel filler flap 140
– power convertible top 36,42
– tailgate 28
– transmission lock, automatic transmission 59
Online Edition for Part no. 01 40 2 914 786 - \251 07/12 BMW AG
Page 217 of 218

REFERENCEEverything from A to Z
216
Turn signal60
– front, replacing bulb 168
– indicator lamp 12
– rear, replacing bulb 169
– side, replacing bulb 169
Tying down load s, refer to
Cargo loading 111
U
Uniform Tire Quality Grading
UTQR 150
Units
– average fuel consumption 70
– temperature 70
Unlatching, refer to
Unlocking 31
Unlocking
– from inside 27
– from outside 24
– tailgate 32
– without remote control, refer
to Comfort Access 31
Upholstery, care 163
USB audio interface 123
V
Valve
– dust cap174
Vehicle
– battery 175
– breaking in 106
– cargo loading 108
– dimensions 197
– identification number, refer
to Engine compartment 155
– parking 56
– storage 164
– weight 203
Vehicle equipment 4
Vehicle jack 165
– jacking points 174
Ventilation
– air conditioner 98
Vents, refer to Air vents 94
Vents, refer to Ventilation 98Volume
– gong
116
– mobile phone 133
– PDC 116
– setting speed- dependent 116
Volume of cargo area 203
W
Warning and indicator
lamps 13,181
Warning messages, refer to
Check Control 73
Warning triangle 177
Washer fluid 62
– capacity of reservoir 63
Washer fluid reservoir 62
Waste tray, refer to
Ashtray 101
Waterfall lighting, refer to Ambient lighting 93
Water on roads, refer to Driving through water 107
Wear indicators in tires, refer to
Minimum tread depth 152
Weights 203
Welcome lamps 89
Wheelbase, refer to Dimensions 197
Wheels, new 153
Wheels and tires 143
Wheel stud wrench
– space-saver spare tire 165
Width, refer to Dimensions 197
Wind deflector 38,43
Windows 33
– closing 33
– convenience operation 24
– opening 33
Window washer, refer to Washer fluid 62
Window washer reservoir, refer to Washer fluid
– volume, refer to
Capacities 205 Window washer system
61
– washer fluid 62
– washer jets 62
Windshield
– cleaning 62
– defrosting and removing condensation 96,98
Windshield wiper blades, changing 165
Windshield wipers, refer to
Wiper system 61
Winter tires 153
– storage 154
Wiper blade replacement 165
Wiper system 61
WMA 121
Work in the engine compartment 156
Wrench/screwdriver, refer to
Toolkit 165
X
Xenon lamps
– replacing bulb 167
Online Edition for Part no. 01 40 2 914 786 - \251 07/12 BMW AG