spare wheel MITSUBISHI COLT 2006 Service Repair Manual

GENERAL INFORMATION
REAR SUSPENSION34-2
GENERAL INFORMATION
M2340000100825
Newly developed H-shaped torsion beam type sus-
pension has been introduced.
•The coil spring is installed under the rear floor,
the torsion beam and arm assembly is installed in
front of the spare tyre house, and the shock
absorber is installed outside, so that the large
cabin space is achieved.
•The arm bushing with the toe control function is
adopted to optimise the tyre steering angle using
the bushing deflection caused by lateral force
and longitudinal force generated at cornering, so
that the good cornering performance is secured.
•The layout of shock absorber is optimised for
smooth riding.
•Long wheel stroke secures sufficient road holding
quality.
•The hub-integrated unit bearing is adopted for the
wheel bearing for sufficient suspension rigidity
(Refer to GROUP 27, Rear Axle
P.27-2).
•The dumping characteristic of shock absorber
has been changed. <4G1>
•The urethane bump stopper has been adopted to
improve the linearity. <4G1>
•Torsion beam rigidity has been improved <4G1>
CONSTRUCTION DIAGRAM
AC405533AD
Coil spring
Shock absorber
Torsion beam and arm assembly
Arm bushing
Torsion bar
Section A – A
<4G9>
A
A Torsion beam and arm assembly
Section A – A
<4G1>
Torsion beam and arm assembly

GENERAL INFORMATION
WHEEL AND TYRE31-2
GENERAL INFORMATION
M2310000100800
The wheels and tyres of the following specifications
have been established.
SPECIFICATIONS
ROAD WHEEL AND TYRE
ItemLSVR, VR-XRALLIART
WheelTy p eSteel typeAluminium typeAluminium type
Size14 × 5.5JJ15 × 6JJ16 × 6.5JJ
Amount of wheel offset
mm464643
PCD mm100100114.3
Ty r eSize175/65R14 82S185/55R15 81V205/45R16 83W
NOTE: PCD indicates the pitch circle diameter of the wheel installation holes.
SPARE WHEEL AND TYRE
ItemLS, VRVR-XRALLIART
Spare
wheelTy p eSteel typeSteel typeSteel type
Size14 × 4T15 × 4T15 × 3.5B
Amount of wheel offset
mm384640
PCD mm10010011 4 . 3
Spare tyreSizeT115/70D14 88MT125/70D15 95MT125/70D15 95M
NOTE: PCD indicates the pitch circle diameter of the wheel installation holes.