clock MITSUBISHI COLT 2008 (in English) Owner's Guide

MITSUBISHI COLT 2008 (in English) Owner's Guide COLT 2008 MITSUBISHI MITSUBISHI https://www.carmanualsonline.info/img/19/34848/w960_34848-0.png MITSUBISHI COLT 2008 (in English) Owner's Guide

Page 398 of 450

MITSUBISHI COLT 2008   (in English) Owners Guide 8-56 Maintenance
8
4. Remove the entire socket and bulb assembly (D) by turn-ing it anticlockwise.NOTE● When mounting the lamp unit, align the holes in the lamp
unit with the pins (E) on the vehicle

Page 401 of 450

MITSUBISHI COLT 2008   (in English) Owners Guide Maintenance8-59
8
4. Remove the bulb by turning it anticlockwise while press-ing in.NOTE● When mounting the lamp unit, align the pins (G) on the
lamp unit with the holes in the body.
E- Rear turn-si

Page 403 of 450

MITSUBISHI COLT 2008   (in English) Owners Guide Maintenance8-61
8
3. Undo the clips (D) (8 locations) one by one, starting at thetop and finishing at the bottom. (Pull each clip in the
direction of the arrow to undo it.) Then, remove the bulb
holde

Page 405 of 450

MITSUBISHI COLT 2008   (in English) Owners Guide Maintenance8-63
8
2. Remove the socket and bulb assembly (C) together byturning it anticlockwise, and then remove the bulb by
turning it anticlockwise while pressing in.High-mounted stop lampsE0100450

Page 409 of 450

MITSUBISHI COLT 2008   (in English) Owners Guide Maintenance8-67
8
Licence plate lampsE01004600116
1. Remove the lamp assemblies by levering them out with astraight blade (or minus) screwdriver. 2. Remove the socket and bulb assembly together by tur

Page 410 of 450

MITSUBISHI COLT 2008   (in English) Owners Guide 8-68 Maintenance
8
NOTE●When installing the lamp, insert tab (A) first, then align
and insert tab (B).Room lamps & map lampsE01004700104
Insert a straight blade (or minus) screwdriver into the notch
Page:   < prev 1-10 11-20 21-30 31-40