heater MITSUBISHI COLT 2008 Owner's Manual (in English)

Overview
Supplemental restraint
system (SRS) - air bag*
(for front passenger’s seat)
P. 2 - 4 7
Accessory socket
P. 5-60
Ventilators P. 5-2
Hazard warning flasher switch
P. 3 - 3 7
Cup holder (for rear seats)
P. 5-69
Parking brake lever
P. 4-6 Gearshift lever* P. 4-22
Allshift lever* P. 4-25
Steering wheel height
adjustment P. 4-9
Heated seats switch*
P. 2-7Front passenger’s air bag
ON-OFF switch* P. 2-53
Audio*
P. 5-24, 5-24
Heater* P. 5-7
Automatic air conditioning*
P. 5 - 1 3
Multi centre display P. 3-14
LHD
Rear window demister
switch P. 3-45
Cup holder (for front
seats) P. 5-69
Front passenger’s
air bag off indicator
lamp* P. 2-56

Overview
Fuses P. 8-30
RHD
Supplemental restraint
system (SRS) - air bag*
(for front passenger’s seat)
P. 2-47
Accessory socket P. 5-60Ventilators P. 5-2
Hazard warning flasher switch
P. 3 - 3 7
Cup holder (for rear seats)
P. 5 - 6 9 Parking brake lever
P. 4-6
Gearshift lever* P. 4-22
Allshift lever* P. 4-25
Steering wheel height
adjustment P. 4-9
Heated seats switch*
P. 2-7
Rear window demister
switch P. 3-45 Audio*
P. 5-24, 5-24
Heater* P.5-7
Automatic air conditioning*
P. 5-13 Multi centre display
P. 3 - 1 4
Front passenger’s air bag
ON-OFF switch* P. 2-53 Front passenger’s air
bag off indicator
lamp* P. 2-56
Cup holder (for front
seats) P. 5-69

Seat and seat belts2-7
2
Heated seats*E00401100162
The heated seats can be operated with the ignition switch in the
“ON” position.
The indicator lamp (A) will illuminate while the heater is on.
CAUTION!
● The reclining mechanism of the seatback is spring
loaded, causing it to return to the vertical position
when the lock lever is op erated. When operating the
lever, sit close to the seatback or hold it with your
hand to control its return motion.
1- Heater high (for quick heating).
2- Heater off.
3- Heater low (to keep the seat warm).
CAUTION!
● Operate in the high positi on for quick heating. Once
the seat is warm, set the heater to low to keep it
warm. Slight variations in seat temperature may be
felt while using the heated seats. This is caused by
the operation of the heater ’s internal thermostat and
does not indicate a malfunction.

2-8 Seat and seat belts
2
NOTE●Do not place heavy objects on th e seat or stick pins, nee-
dles, or other pointed objects into it.
● When cleaning the seat, do not use benzene, gasoline,
alcohol, or other organic solvents; this might damage the
surface of the seat and al so the heater element.
● If water or any other liquid is spilled on the seat, allow it
to dry thoroughly before attempting to use the heater.
Rear seat*
E00401300207
NOTE●It is possible to adjust each si de of the rear seats forward
and backward independently of the other side (5-door
models, separated seat only), to adjust the seatback angle
independently on each side, a nd to fold the seatback for-
ward independently on each side.
● If the following types of p ersons use the heated seats,
they might become too ho t or receive minor burns
(red skin, heat blisters, etc.):
• Children, elderly or ill people
• People with sensitive skin
• Excessively tired people
• People under the influence of alcohol or sleep inducing medication (cold medicine, etc.)
● Do not use a blanket, cushio n, or other material with
high heat insulation properties on the seat while
using the heater; this might cause the heater element
to overheat.
● Turn the heater off immediately if it appears to be
malfunctioning during use.
CAUTION!
WARNING!
●When a person is sitting in the rear seats, pull up the
head restraint to a height at which it locks in posi-
tion. Be sure to make this adjustment before starting
to drive. Serious injuries could otherwise result in
an impact. Refer to “Head restraints” on page 2-10.

3-46 Instruments and controls
3Horn switch
E00508000103
Pressing the “ ” mark on the steering wheel, causes the horn
to sound.
CAUTION!
●
The demister switch is not to melt snow but to clear
mist. Remove snow before use of the demister
switch.
●To avoid unnecessary disc harge of the battery, do
not use the rear window de mister during starting of
the engine or when the en gine is not running. Turn
the demister off immediat ely after the window is
clear.
● When cleaning the inside of the rear window, use a
soft cloth and wipe gently along the heater wires,
being careful not to damage the wires.
●Do not allow objects to touch the inside of the rear
window glass, damaged or broken wires may result.

Starting and driving4-13
4
To fold the mirrorE00601100454
The outside mirror can be folded in towards the side window to
prevent damage when parking in narrow areas.
Heated mirror*E00601200279
When the rear window demister switch is pressed, the outside
rear-view mirrors are demisted or defrosted. Current will flow
through the heater element insi de the mirrors, thus clearing
away frost or condensation.
The indicator lamp (A) will illuminate while the demister is on.
The heater will be turned off automatically in about 20 min-
utes.

5
For pleasant driving
Ventilators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 2
Heater* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 7
Automatic air conditioning* . . . . . . . . . . . . . . . . .5- 13
Important operation tips for the air conditioning . .5- 22
Air purifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 23
LW/MW/FM electronic tuning radio with CD player* . . . . . . . . . . . . . . . . . . . . . . . . .5- 24
Steering wheel remote control switch* . . . . . . . . .5- 52
Error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 54
Handling compact discs . . . . . . . . . . . . . . . . . . . . .5- 56
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 59
Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 59
Vanity mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 60
Accessory socket . . . . . . . . . . . . . . . . . . . . . . . . . .5- 60
Interior lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 61
Storage spaces . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 64
Cup holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 69
Rear shelf panel* . . . . . . . . . . . . . . . . . . . . . . . . . .5- 70
Coat hooks* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 72
Luggage hooks (5-door models)* . . . . . . . . . . . . .5- 72
Luggage net (5-door models)* . . . . . . . . . . . . . . . .5- 73

For pleasant driving5-7
5
Heater
*
E00700500090
The heater can only be used
while the engine is running.
Control panelE00700600118
Blower speed selection dialE00700700034
Select the blower speed by turning the blower speed selection
dial clockwise or anticlockwise.
The blower speed will gradually increase as the dial is turned
to the right.
When the blower speed selection dial is set to the “0” position,
all fan-driven airflow will stop.
A- Temperature control dial
B- Blower speed selection dial
C- Mode selection dial
D- Air selection switch

5-8 For pleasant driving
5
Temperature control dialE00700900124
The temperature control dial is used to adjust the air tempera-
ture.
Turn it clockwise to increase the temperature and anticlock-
wise to reduce the temperature.
NOTE● While the engine coolant temp erature is low, the tempera-
ture of the air from the heater will be cool/cold until the
engine warms up, even if you have selected warm air with
the dial.
Mode selection dialE00701100051
To change the amount of air flowing from the ventilators, turn
the mode selection dial. (Refer to “Changing the mode selec-
tion” on page 5-3.)

5-10 For pleasant driving
5
Operating the heater systemE00701800104
Heating
Set the mode selection dial to the “ ” position and set the air
selection switch (A) to the outside position.
Turn the temperature control dial clockwise or anticlockwise to
the desired temperature. Sel ect the desired blower speed.
NOTE●For maximum heat, set the blower speed to the 3rd posi-
tion.
Maximum heating (diesel-powered vehicles)E00724600011
Use it when the engine coolant temperature is low and you
wish to increase the heating performance.
1. Set the air selection switch (A) to the outside position.
2. Set the mode selection dial to the “ ” position.
3. Set the temperature control dial to the highest position.
4. Set the blower speed selection dial to the 3rd position.
NOTE● As the engine speed increases, the electric heater in the
heater system will operate to further increase heating per-
formance.