wheel torque MITSUBISHI COLT 2008 Owner's Manual (in English)

For emergencies6-33
6
12. Lower the vehicle slowly and then tighten the nuts in theorder shown in the illustration until each nut has been
tightened to the torque listed here.
Tightening torque
98 to 118 Nm
(Achieved by applying the force of 440 to 520 N at the
end of the wheel nut wrench supplied with the vehicle) 13. Lower and remove the jack, then store the jack, flat tyre,
and chock. Have your damaged tyre repaired as soon as
possible.
14. Check your tyre inflation pr essure. The correct pressures
are shown on the door label. See the illustration.
CAUTION!
● Never apply oil to either the wheel bolts or the nuts
or they will tighten too much.
CAUTION!
●Never use your foot or a pipe extension for extra
force in the wheel nut wrench. If you do so, you will
tighten the nut too much.
CAUTION!
●The tyre pressure should be periodically checked
and maintained at the specified pressure while the
tyre is stowed.