torque MITSUBISHI COLT 2011 Owner's Manual (in English)
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 2011, Model line: COLT, Model: MITSUBISHI COLT 2011Pages: 274, PDF Size: 17.88 MB
Page 202 of 274
WARNINGlMount the spare wheel with the valve
stem (F) facing outboard. If you cannot
see the valve stem (F), you have installed
the wheel backwards.
Operating the vehicle with the spare
wheel installed backwards can cause vehi-
cle damage and result in an accident.
11. Finger-tighten the wheel nuts. (Turn them
clockwise.)
Tighten the wheel nuts until the tapered parts
of the wheel nuts make light contact with the
seats of the wheel holes and the wheel is not
loose.
Tighten the wheel nuts in the same way with
a compact spare wheel.
Vehicle with steel wheelsWheel nuts without capsWheel nuts with capsVehicles with aluminium wheelsNormal wheelsCompact spare wheel
CAUTIONl Never apply oil to either the wheel bolts
or the nuts, or they will tighten too much.
12. Lower the vehicle slowly and then tighten
the nuts in the order shown in the illustration
until each nut has been tightened to the tor-
que listed here.
Tightening torque
For emergencies
6-16
6
Page 255 of 274
Engine specificationsE01100602386Item1100 models1300 models1500 modelsEngine typeThree-cylinder, in line, water cooled
four-cycle, double overhead camshaftFour-cylinder, in line, water cooled
four-cycle, double overhead camshaftFour-cylinder, in line, water cooled four-
cycle, double overhead camshaft with in- tercooler and turbochargerEngine model1349103A911359304A904G15Total displacement1,124 cc1,332 cc1,468 ccBore75.0 mm75.0 mm75.5 mmStroke84.8 mm75.4 mm82.0 mmCompression ratio10.511.010.511.09.0Valve clearanceIntake0.18 - 0.26 mm (cold)AutomaticallyExhaust0.26 - 0.34 mm (cold)AutomaticallyFiring order1-3-21-3-4-2Maximum output (EEC net)55 kW/6.000 r/min70 kW/6.000 r/min110 kW/6.000 r/minMaximum torque (EEC net)100 Nm/4,000 r/min125 Nm/4,000 r/min210 Nm/3,500 r/min
Specifications
9-09
9