compression ratio MITSUBISHI ENDEAVOR 2004 Service Repair Manual

Fig. 22: Setting Compression Gauge To One Of Spark Plug Holes

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
6. Crank the engine with the throttle valve fully open and measure the
compression pressure.
Standard value (at engine speed of 200 r/min): 1,548 kPa (225 psi)
Minimum limit (at engine speed of 200 r/min): 1,117 kPa (162 psi)
7. Measure the compression pressure for all the cylinders, and check that the
pressure difference of the cylinders are below the limit.
Limit: 98 kPa (14 psi)
8. If there is a cylinder with compression or a compression difference that is
outside the limit, pour a small amount of engine oil through the spark plug
hole, and repeat the operations in steps 6 to 8.
1. If the com
pression increases after oil is added, the cause of the

2004 Mitsubishi Endeavor Limited
2004 ENGINE Engine - Endeavor