heating MITSUBISHI iMiEV 2012 1.G User Guide

5-8 Comfort controls
5
Temperature control dial
N00736600235
Use this dial to adjust the temperature of the air flow from the
vents.
Turn the temperature control dial clockwise to make the air
warmer. Turn it counterclockwise to make the air cooler.
When the dial is set to middle (
) position, only uncooled and
unheated air will flow.
When the dial is moved to middle (
) position when using
cooling or heating, cooling or heating stops.NOTE
When the dial is moved from middle (
) position to the
left while the air conditioning is not operating, the air tem-
perature will not change.

When the dial is moved to middle (
) position and then to
the left while the air conditioning is operating, the air con-
ditioning system is operating again.
When the temperature control dial is set to “C” position,
the air selection will be automatically set to the
recirculation position and the air conditioning will oper-
ate.
When the dial is moved thereafter, the air conditioning
continues to operate and the air selection setting returns to
the setting before the dial was set to “C” position.
Mode selection dial
N00736700210
To change the position and amount of air flowing from the
vents, turn the mode selection dial. Refer to “Changing the
mode selection” on page 5-3.
BK0140800US.book 8 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Comfort controls
5-11
5
MAX switch
N00766500015
When the blower speed selection dial is not OFF and the MAX
switch is pressed, the indicator light (A) illuminates and cool-
ing/heating performance and the air conditioning setting is
changed according to the temperature control dial position.
When the switch is pressed again, the operation returns to the
mode before pressing the switch.
When the temperature control dial is set between middle
(
) and “H” position
The heating capability is at maximum.
When the temperature control dial is in middle (
) posi-
tion
The air flow is at maximum.When the temperature control dial is set between “C” and
middle (
) position
The air conditioning automatically operates and the cooling
capability is at maximum.
NOTE
Do not use the cooling/heating function with the MAX
switch for a long time. Because the power consumption is
greatly increased, the cruising range is shortened.

When the blower speed selection dial or temperature con-
trol dial is operated with the indicator light illuminated,
the indicator light goes out and the selected function over-
rides others.
Other functions return to the mode before pressing the
MAX switch.

When the air conditioning is operated with the MAX
switch, the air conditioning does not stop if the function is
cancelled.
BK0140800US.book 11 ページ ２０１１年９月２９日　木曜日　午後３時２８分

5-12 Comfort controls
5
Operating the air conditioning system
N00731100251
Heating 1. Set the mode selection dial to the “ ” position.
2. Set the air selection switch (A) to the outside position.
3. Turn the temperature control dial clockwise or counter-
clockwise to the desired temperature between middle (
)
and “H” position.
4. Select the desired blower speed.
NOTE
When the blower speed selection dial is set to the
“AUTO” position, the air flow is adjusted automatically
according to the temperature of the interior and the posi-
tion of the temperature control dial.
BK0140800US.book 12 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Comfort controls
5-13
5
Quick heating1. Set the mode selection dial to the “ ” position.
2. Set the air selection switch (A) to the outside position.
3. Turn the temperature control dial clockwise or counter-
clockwise to between middle (
) position and “H” posi-
tion.
4. Turn the blower speed selection dial to any position other
than “OFF” position.
5. Press the MAX switch (B).NOTE
Do not use the heating function with the MAX switch for
a long time. Because the power consumption is greatly
increased, the cruising range is shortened.
Cooling
N00731200337
For ordinary cooling

1. Set the mode selection dial to the “ ” position.
2. Set the air selection switch (A) to the outside position.
3. Turn the temperature control dial clockwise or counter-
clockwise to the desired temperature between middle (
)
and “C” position.
4. Select the desired blower speed.
5. Push the air conditioning switch (B).
6. When the air conditioning is operating, the switch indica-
tor light (C) illuminates.
BK0140800US.book 13 ページ ２０１１年９月２９日　木曜日　午後３時２８分

6-16 For emergencies
6
15. Check and adjust the tire pressure with reference to the air
pressure gauge on the compressor. If you overinflate the
tire, release air by loosening the hose’s end fitting. (Refer
to “Tire inflation pressures” on page 7-21.)
If there is a gap between the tire and wheel because the
tire has moved inward from the wheel rim, press the tire
tread towards the wheel to close the gap before running
the compressor. (With no gaps, the tire pressure will rise.)NOTE
If the tire pressure does not rise to the specified level
within 10 minutes, the tire may be so severely damaged
that the tire sealant cannot be used to effect the emergency
repair. Do not drive the vehicle. Please contact a certified
i-MiEV dealer.
WA R N I N G
!
Do not place your hand or fingers between the tire
and wheel while inflating the tire. Your hand or fin-
gers may become caught between the tire and wheel.
CAUTION
!
The supplied compressor is designed only for infla-
tion of your vehicle tires.
The compressor is designed to run on a vehicle’s
12 V power supply. Do not connect it to any other
power source.
The compressor is not waterproof. If you use it in
rain, make sure water does not get on it.
Any sand or dust sucked into the compressor could
make the compressor break down. Do not place the
compressor directly on any sandy or dusty surface
when using it.
Do not disassemble or modify the compressor. Also,
do not subject the air pressure gauge to shock. It
could malfunction.
CAUTION
!
The surface of the compressor will get hot while the
compressor is running. Do not keep the compressor
running continuously for more than 10 minutes.
After using the compressor, wait for the compressor
to cool before using it again.
If the compressor becomes sluggish or hot while
operating, it is overheating. Immediately place the
switch in the OFF position and let the compressor
cool down for at least 30 minutes.
BK0140800US.book 16 ページ ２０１１年９月２９日　木曜日　午後３時２８分

7-28 Vehicle care and maintenance
7For cold and snowy weather
N00942600131
Ventilation slotsThe ventilation slots in front of the windshield should be
brushed clear after a heavy snowfall so that the operation of the
heating and ventilation systems will not be impaired.WeatherstrippingTo prevent freezing of the weatherstripping on the doors, hood,
etc., they should be treated with silicone grease.Additional equipment (For regions where snow is
encountered)It is a good idea to carry a shovel or a short-handled spade in
the vehicle during the winter so that you can clear away snow
if you get stranded. A small hand-brush for sweeping snow off
the vehicle and a plastic scraper for the windshield, side and
rear window are also useful.
Fusible links
N00942700321
The fusible links will melt to prevent a fire if a large current
attempts to flow through certain electrical systems.
In case of a melted fusible link, see a certified i-MiEV dealer
for inspection and replacement.
For the fusible links, please refer to “Fuse load capacities” on
page 7-30.
WA R N I N G
!
Fusible links must not be replaced by any other
device. Failing to fit the correct fusible link may
result in fire in the vehicle, property destruction and
serious or fatal injuries at any time.
BK0140800US.book 28 ページ ２０１１年９月２９日　木曜日　午後３時２８分