fuse box location MITSUBISHI L200 2017 Owner's Manual (in English)

Fusible linksE01002901721
The fusible links will melt to prevent a fire if
a large current attempts to flow through cer- tain electrical systems.
In case of a melted fusible link, we recom- mend you to have your vehicle inspected.For the fusible links, please refer to “Passen-
ger compartment fuse location table” on page
10-18 and “Engine compartment fuse location
table” on page 10-19.WARNINGl Fusible links must not be replaced by any
other device. Failing to fit the correct fusi-
ble link may result in fire in the vehicle,
property destruction and serious or fatal injuries at any time.Fuses
E01003000849Fuse block location
E01007601563
To prevent damage to the electrical systemdue to short-circuiting or overloading, each individual circuit is provided with a fuse.
There are fuse blocks in the passenger com- partment and in the engine compartment.
Passenger compartment (LHD
vehicles)
The fuse blocks in the passenger compart-
ment are located behind the fuse lid in front of the driver’s seat at the position shown in
the illustration.
Pull the fuse lid to remove it.
Passenger compartment (RHD
vehicles)
The fuse block in the passenger compartment
is located behind the glove box at the posi-
tion shown in the illustration.
1- Open the glove box.
2- While pressing the side of the glove box,
unhook the left and right hooks (A) and lower the glove box.
Fusible links
10-17OKTE17E1Maintenance10