length MITSUBISHI LANCER 2010 8.G MMCS Manual

Detour 4-3
Route
Detour
Detours that specify the distance from the
current location, or detours that specify
streets to avoid can be set.
1 Touch [Route] on the current
location screen
eng_a074
The route menu is displayed. 2 Touch [Detour]
eng_a500-2

eng_a107
The detour setting screen is displayed.
Detour Distance
Specifying the distance to calculate the
detour route.
1
Touch the desired detour distance
for “Detour Distance” in the detour
setting screen
(page 4-3)

eng_a108
A detour route is calculated according to the speci ed
distance, and route guidance starts.NOTE The distance unit in the factory settings is “miles”. If the
unit is changed to “km” (
“System Settings” (page 10-5)
),
the detour distances are [1], [5], [10], [20], [40], [80].
 A detour route longer than the entire route length
cannot be selected.
Avoid Street
Settings are performed here for selecting
a start street and an end street, and
detouring the area in between.
1 Touch [Avoid Street] in the detour
setting screen
(page 4-3)
A list of streets to be passed on the current route is
displayed. 2 Touch the start street
eng_a109
NOTE If the route to be calculated detours only one street,
go to step 4. 3 Touch the end street
eng_a110
4 Touch [Set]
A detour route is calculated according to the speci ed
street area, and route guidance starts.