reset MITSUBISHI LANCER 2012 8.G MMCS Manual

Mobile Phone 10-12
Mobile Phone
(if so equipped)
Only for cars equipped with Bluetooth® 2.0 interface.
When pairing is complete, the Mobile Phone
can be used.
The display screen and operation may differ
depending on the type of Mobile Phone being
connected.

1 Press the [INFO] key, and touch
[Mobile Phone]
eng_a665
eng_a666
eng_a667
NOTE 1) Number dial buttons
2) [Dial]
To make a call.
3) [Redial]
To dial again the number previously dialed.
4) [Back]
To display the previous screen.
5) [Phonebook]
To display the Vehicle Phonebook or the Mobile
Phonebook.
6) [Clear]
To delete one character at a time
7) [Pairing]
Displays the Pairing List Screen.
8) [Lock]
Is displayed when the Passcode has not been set. (To set the Passcode.)
9) [Unlock]
Is displayed when the Passcode has been set.
10) [Help]
Displays the VR Command List screen.
11) [Back]
Deletes the Sub Menu.
12) [Reset All]
To reset all the settings.
Making Phone Calls
Enter phone number to make a phone call>Enter the phone number from the Mobile Phone
screen and touch the [Dial] button.
eng_a666
Select a list from either Phonebook and make
a phone call
Touch [Phonebook] from the Mobile Phone screen.
eng_a668
Select from the Vehicle Phonebook list (or Mobile
Phonebook list).
eng_a669When the dial confirmation message is displayed,
touch [YES].
3)
5)
1)2)
4)
6)
7)8)9)10)11 )
12)
\b \b
\f \



 \b \b


Mobile Phone 10-14
Entering Phone Number to Create Data for
Phonebook

1 Touch [New] on the Vehicle
Phonebook screen
eng_669
2 Select each field and enter the
necessary information
eng_678Name : Enter name.
Home, Work, Mobile, Other : Enter phone number.
NOTE
edit from the Vehicle Phonebook screen and touch
[Edit].
Setting Passcode
1 Touch [Lock] button from the
Sub Menu
eng_a667
2 Enter Passcode
eng_a674
3 Touch [ENTER]
NOTE
Menu and enter the preset Passcode.
Receiving Phone Calls
1 When the incoming call screen is
displayed, press the [PICK-UP] button
eng_a229
eng_a230Phone plate
The On phone screen is displayed.
NOTE will be displayed on the current location screen
when a “Bluetooth® 2.0 interface” is connected.
or when an intersection information map is shown.

to display the phone plate.
\b \b
\f \



\b \b \b


System Settings 11-6 Keyboard Layout
Changing the layout of the keyboard.
[Alphabet]
eng_a169[PC]
eng_a170
Color SchemeSet the color scheme for the menu screen, etc.[Red] The menu is displayed using a red color scheme.
[Blue] The menu is displayed using a blue
color scheme.
A/V Icons on MapIt is possible to set whether or not to display on screen
icons displaying the audio status.
[On] Display.
[Off] Do not display.
Sensor CalibrationThe level of the vehicle speed sensor and gyro sensor
can be checked and the learning levels can be reset.
eng_a206
NOTE touching [Clear].
The learning levels can be reset.
A/C Cut inSetting whether or not to use an interrupt display
during air conditioning operations.
[On] Interrupt is displayed.
[Off] Interrupt is not displayed.
\b \b
\f \



 \b \b
\f

Equipment 11-8
Returning the Equipment Settings to Default
Return the settings to default to return to
the factory settings.

1 Display the Equipment screen,
and touch [Reset all]
eng_a237
2 Touch [Yes]
eng_a241
Returning the equipment settings to default is
completed.
\b \b
\f \



 \b \b
\f