ignition MITSUBISHI LANCER 2016 8.G Owners Manual

Instruments and controls (Driver’s area)1-1
1
Overview
N0010020
2661
Instruments and contr
ols (Driver
’s ar
ea)
Instrument clus
ter P.5-90
Sportronic steering wheel paddle shifter (if so equipped) P
.5-64
Multi-information meter switch P
.5-93
Com
bination headlight
s and dimmer
switch
P.5-127
Turn signal leve
r P.5-133
Front fog light switch (if so equipped)P.5-134
Wiper and wa
sher switch
P.5-134Cruise control switches (if so equi
ppe
d) P.5-80
Steering
wheel
audio
remote
cont
rol switche
s (if so equi
ppe
d)
P.5-141
Ignition switch P
.5-52
Headlight
leveling
switch
(if so equip
ped
) P.5-132
Supplemental re
straint
system - air
-
bag (for
driver’s seat)
P.4-20
Horn switch P
.5-139
Active stability control (
ASC)
OFF switch (if so equipped) P.5-76
Fuses
P.9-25
Steering wheel tilt lock lever P.5-49
Supplemental
restraint
system -
driver
’s knee airbag
P.4-20
Bluetoot
h® 2.0 interface (if so equipped) P
.5-139
Engine hood rele
ase
lever
P.9-3

If this problem occurs...
Quick index
2-3
2
N00200901
949
If this pr
oblem occurs... Problem
Do this
Ref. Page
Cannot turn the ke
y.
(When using a key to start the engine)
When using a key to start the engineWill not turn fr
om “LOCK” to “ACC”.
Turn the key while turning the steering wheel in either direction.
P.5-53
Will not turn fr
om “ACC” to “LOCK”.
Vehicles
with
continuously
variable
transmission
(CVT):
Check
the
position
of the
selector
lever
.
The key cannot be removed unless the selector lever is set to the “P” (P
ARK) position.
Vehicles
with
manual
transaxle:
Place the key at the “ACC” position. Push the key in and turn it.
(Whe
n using
the F.A.S.T
.-key
to start
the engine)
When using the F
.A.S.T
.-key to start the engine
Will not turn fr
om “LOCK (PUSH OFF)” to “ACC”.
Push the ignition switch again, turn the steeri
ng wheel in both directions and then turn
the ignition switch.Will not turn fr
om “ACC” to “LOCK”.
Vehicles
with
CVT
:
Check whether the selector lever is set to the “P” (P
ARK) position.
Vehicles
with
manual
transaxle:
Place the ignition switch at the “ACC” positi
on. Push the ignition switch in and turn it.
P.5-12
The F
.A.S.T
.-key does not operate.
(for vehicles equipped with the F.A.S.T
.-key)
Use the emer
gency key to lock and unlock the doors and start the engine.
P.5-22
Cannot shift the selector lever from the “P” (P
ARK) position. (for vehi-
cles equipped with CVT)
Shift the selector lever while pressing the brake pedal. Check
that
the
ignition
key
or ignition
switch is in the “ON” position.
P.5-59

Front seats4-4
Seat and restraint systems
4
release
the
leve
r. The
seatback
will
lock
in
place.
N0040210
0184
Operate
the
lever
repeatedly
to raise
or
lower
the seat.
N0043560
1447
The
heated
seats
can
be
operated
when
the
ignition switch is in the “ON” position.
CAUTIONThe
reclining
mechanis
m used
in
the
seat-
back
is spring
loaded,
and
will
caus
e the
seatback
to
return
quickly
to
the
vertical
position
when
the
lock
lever
is operated.
When
pullin
g the
lev
er, sit close
to the seat-
back
or hold
the
seatb
ack
with your hand
to
control
its return
motion.
W
AR
NING
To reduce
the
risk
of
serious
injur
y or
death
in the even
t of an accid
ent or
sud-
den
stop,
all
seatbacks
should
be
kept
in
the
upright
position
while
the
vehicle
is in
motion. Seat
belt
performance
during
an
accident
can
be
adversely
affected
if the
seatbacks
are reclined.
The
mor
e a seatback
is
reclined,
the
mor
e likely
seat
belt
perfor
-
mance
will
be
adversely
affected.
If the
seat
belt
is not
properly
positioned
against
the
body
during
an
accident,
ther
e is
incr
eased
risk
you
will
slide
under
the
belt
and
receive serious injury or death.
To adjust the seat height (Driver
’s side only
, if so
equipped)
1-
Raise
2-
Lower
Heated seats
(if so equipped)
1(HI)-
Heater high (for quick heating)
2-
Heater
off

Seat
belts
4-10
Seat and restraint systems
4
4.The
lap
part
of
the
belt
must
always
be
worn
low
and
snug
across
the
hips.
Pull
up
on
the
shoulder
portion
of
the
belt
to
take
up
any
slack
in the
lap
belt.
5.To release
the
belt,
press
the
button
on
the
buckle and allow the belt to retract. If the
belt
does
not
retract
smoothly
, pull
it
out
and
check
for
kinks
or
twists
in
the
webbing.
Then
make
sure
it
remains
untwisted as it retracts.
N0041840
0300
Warning light
Warning display type 1
Warning display type 2
A tone
and
warning
light
are
used
to remind
the driver to fasten the seat belt.If the
ignition
switch
is set
to the
“ON”
posi-
tion
without
the
driver
’s seat
belt
being
fas-
tened,
a warning
light
will
come
on
and
a
tone
will
sound
for
approximately
6 seconds
to remind you to fasten your seat belt.If you
then
drive
with
the
seat
belt
unfastened
for
longer
than
a minute
from
when
the
igni-
NOTE
If the
seat
belt
locks
up
and
cannot
be pulled
out,
pull it once
with force
and
let
it retract
all
the way.
Then, pull
the
belt
out slowl
y once again
.
NOTE
With
the
exception
of
the
seat
belt
for
the
driver
, the
seat
belts
in all
other
seating
posi-
tions
are equi
ppe
d with an Aut
omatic
Lock-
ing
Retractor
(AL
R)
function.
If you
pull
the
seat
belt
fully
out
of the retracto
r, the retrac-
tor
will
switch
to its ALR child restrain
t
installation
function
(see
page
4-18).
When the ALR function
has been
activ
ated
,
the
seat
belt
will
only
retract.
If this
happens,
let
the belt
fully
retract,
then pull
the
seat
belt
back
out,
repeating
steps
1 through
4.
W
AR
NING
Be
sur
e the
lap
belt por
tion
fits snugl
y and
is worn
as low
as pos
sible
acr
oss the
hips,
not around
the waist. Failu
re to follow
this
instru
ction
will increas
e the risk
of seriou
s
injury
or death
in the
event
of an
accident.
Be sur
e the
seat
belt webbi
ng
is not
twisted
when
worn.
Twisted
webbing
may
adversely affect seat belt performance.
Driver
’s seat belt
reminder/warning light and
display

Child restraint systems
Seat and restraint systems
4-13
4
The
airbag
control
unit
monitors
the
readiness
of the
electronic
parts
of the
system
whenever
the
ignition
switch
is
in
the
“ON”
or
“ST
ART” position.
These
include
all
of
the
items listed above and all related wiring. The
pre-tensioner
seat
belt
system
will
oper
-
ate
only
when
the
ignition
switch
is
in
the
“ON”
or “ST
ART” position.
When
the
seat
belt
pre-tensioners
activate,
some
smoke
is released
and
a loud
noise
will
be
heard.
The
smoke
is not
harmful,
but
care
should
be
taken
not
to intentionally
inhale
it,
as
it may
cause
some
temporary
irritation
to
people with respiratory problems.
The
pre-tensioners
activate
in
the
event
of
a
moderate-to-severe
frontal
or
side
impact,
even
if the
seat
belt
is not
being
worn.
The
seat
belt
pre-tensioners
may
not
activate
in
certain
types
of
collisions,
even
though
the
vehi
cle
may
appea
r to be
severely
damaged.
Such
non-activation
does
not
mean
some-
thing
is wrong
with
the
seat
belt
pre-tensioner
system,
but
rather
that
the
collision
forces
were
not
severe
enough
or
not
of
the
type
to
activate the system.
N00408700
094
This
warning
tells
you
if there
is a problem
involving
the
SRS
airbags
and
the
pre-ten-
sioner
seat
belts.
Refer
to “SRS
warning”
on
page 4-26.
N0040890
0113
In the
event
of an
accident,
the
seat
belt
force
limiter
system
will
help
reduce
the
force
applied
to the
driver
and
front
seat
passenger
.
N00407101
766
When
transporting
infants
or
small
children
in your
vehicle,
an
appropriate
child
restraint
system
must
always
be
used.
This
is required
by law in the U.S. and Canada.Child
restraint
systems
specifically
designed
for
infants
and
small
children
are
offered
by
several
manufacturers.
Choose
only
a child
restraint
system
with
a label
certifying
that
it
complies
with
Federal
Motor
Vehicle
Safety
Standard
213
(FMVSS
213)
or Motor
Vehicle
Restraint
Systems
and
Booster
Seats
Safety
Regulations
(RSSR).
Look
for
the
manufac-
turer
’s statement
of
compliance
on
the
box
and child restraint system itself. The
child
restraint
system
should
be
appropri-
ate
for
your
child’
s weight
and
height,
and
should properly fit your vehicle’
s seat.
For
detail
information,
refer
to the
instruction
manual
accompanying
the
child
restraint
sys-
tem.
1-
SRS warning light
2-
Front impact sensors
3-
Seat belt pre-tensioners
4-
Airbag control unit
5-
Side impact sensors
W
AR
NING
The
seat
belt
pre-tensioner
system
is
designe
d to wor
k onl
y once.
After
the
seat
belt pre-tensi
oners
have
been
activate
d,
they
will
not
work
again.
They
must
promptl
y be replaced
and
the
entire seat
belt
pre-tension
er
system
inspected
by an
authorized
Mitsubi
shi
Motors
dealer
.
SRS
warning
For
ce limiter system
Child r
estraint systems

Supplemental Restraint System (SRS) - airbag
Seat and restraint systems
4-23
4
N00407801
545
The SRS includes the following components:
The
airbag
control
unit
monitors
the
readiness
of the
electronic
parts
of the
system
whenever
the
ignition
switch
is
in
the
“ON”
or
“ST
ART”
position.
These
include
all
of
the
items listed above and all related wiring. The
airbags
will
operate
only
when
the
igni-
tion
switch
is in the
“ON”
or
“ST
ART”
posi-
tion. When
the
impact
sensors
detect
a front
or
side
impact
suf
ficient
to deploy
the
airbag(s),
the appropriate airbag(s) will be deployed.
When
airbags
deploy
, some
smo
ke
is relea
sed
accompanied
by
a loud
noise.
The
smoke
is
not
harmful,
but
do
not
intentionally
inhale
the
smoke
as
it may
cause
temporary
irrita-
tion to people with respiratory problems.After
deployment,
the
airbags
will
quickly
deflate,
so
quickly
that
some
people
may
not
even
realize
the
airbags
inflated.
Airbag
inflation
does
not
prevent
the
driver
from
seeing
or being
able
to steer
the
vehicle,
and
does
not
prevent
people
from
leaving
the
veh
icle.
N00418600
230
This
vehicle
is equipped
with
an
event
data
recorder
(EDR).
The
main
purpos
e of
an
ED
R is to record,
in
certain
crash
or
near
crash-like
situations,
such
as
an
airbag
deployment
or
hitting
a
road
obstacle,
data
that
will
assist
in
under
-
standing how a vehicle’
s systems performed.
W
AR
NING
Older
childr
en
should
be
seated
in
the
rear
seat
with
their
seat
belt
properly
worn,
and
with
an
appr
opriate
booster
seat
if needed.
Refer
to
“Childr
en who
have
outgr
own
child
restraint
systems”
on
page
4-19.
How the Supplemental Restraint System works 1-
Driver
’s airbag
2-
SRS warning light
3-
Passenger
’s airbag of
f indicator
4-
Passenger
’s front airbag
5-
Front impact sensors
6-
Driver
’s knee
airbag
7-
Driver
’s seat
position
sensor
8-
Seat
belt
buckle
switch
(Passenger
’s side only)
9-
Passenger
’s seat weight sensors
10-
Airbag control unit
11-
Side airbag modules
12-
Curtain airbag modules
13-
Side impact sensors
CAUTIONAirba
gs
inflate
ver
y quick
ly and
with great
force.
In certain
situations,
con
tact
with an
inflating
airbag
may
cause
small
cuts, abra
-
sions, and
brui
ses. Ref
er to
“Supplemen
tal
Restraint
System
(SRS)
- airbag”
on
page
4-20.
Event Data Recording

Supplemental Restraint System (SRS) - airbag
Seat and restraint systems
4-25
4
N00418100
277
The
passenger
’s
airbag
off
indicator
is
located in the instrument panel.
The
indicator
normally
comes
on
when
the
ignition
switch
is turned
to the
“ON”
position
and goes out a few seconds later
.
In
the
following
situations,
the
indicator
will
stay
on
to show
that
the
passenger
’s front
air-
bag is not operational.The
passenger
’s seat
weight
sensors
sense
a weight
of
less
than
approximately
66
pounds
(30
kg)
on
the
front
passenger
seat.The
front
passenger
’s seat
is not
occupied.
When
the
weight
applied
to the
front
passen-
ger
seat
is
sensed
to
be
approximately
66
pounds
(30
kg)
or
greater
, the
indicator
goes
out
to show
that
the
passenger
’s front
airbag
is operational.
W
AR
NING
If any
of
the
followi
ng
condi
tions
occu
r,
you
shoul
d imme
diately
have
your
vehicle
inspected
by an authorized
Mitsubi
shi
Motors
dealer
as soon
as possible:
•The SRS
warn
ing does
not
initially come
on
whe
n the
ign
ition
swi
tch is tur
ned to
the
“ON” or “ST
ART” posi
tion.
•The
SRS
warning
does
not
go
out
after
several
seconds.
•The SRS
warn
ing comes
on while
you
are
driv
ing.
To ensur
e that
the
passe
nge
r’s seat weight
sensors
can
corr
ectly
sense
the
weight
being
applied
to the
seat
, observe
the
fol-
lowing
ins
tructions.
Failur
e to follow
these
instr
uctions
can
advers
ely
affect
the
per-
for
mance
of
the
passe
nge
r’s airbag
sys-
tem.•Adjust
the
seat
to
the
correct posi
tion,
and
sit well
back
against
the seatb
ack
.
Refer
to “Fr
ont seats
” on page
4-3.
•Do
not
reclin
e the
seatbac
k mor
e than
necessary
.
•Never
have
mor
e than
one
person
(adult
or child)
sitting
on
the
seat.
•Do
not
place
anything
between
the
seat
and the floor console.•Do
not
hang
anything
on
the
front
pas-
sen
ger
’s seatback.
•Do not remove
the
head
restraints.
•When
attaching
a child
restraint
system,
secur
e it firmly
.
•Do not place
luggage
or
oth
er objects
on
the
seat.
•Do
not
use
a seat
cover
or a cushion.
•Do
not
modify
or
replace
the
seat
and
seat
belt.
•Do
not
place
luggage
or other
object
s
under
the
seat.
•Do not
place
the floo
r mat
on the
seat
rails
.
•Do
not
expose
the
sensors
to
liquids
or
vapors.•Do not subject
the sensors
to shock
.
•Do not allow
rear
-seat
occupa
nts to push
the
front
passenger
seat
with
their
feet
or
force the
front passe
nger s
eat upward
.
•Do not
allow
rear
-seat
occupants
to grasp
the
front
passe
nge
r’s seatbac
k or put
their
arms
around i
t.
•When attac
hing
a child restraint
syste
m
in
the
rear
seat, make
sure it does
not
interfer
e with
the front seat.
If
the
vehicle
is
involved
in
a sever
e
impac
t, have
the
SRS
sensor
s inspect
ed by
an authorized
Mitsubi
shi
Motor
s dealer
as
soon
as possi
ble.
Passenger
’s airbag
off
indicator
W
AR
NING

Supplemental Restraint System (SRS) - airbag4-26
Seat and restraint systems
4
N0040830
1619
Warning light
Warning display type 1Warning display type 2The
system
checks
itself
every
time
the
igni-
tion switch is turned to the “ON” position. The
SRS
warning
light
will
come
on
for
sev-
eral
seconds
and
then
go
out.
This
is normal
and means the system is working properly
.
If there
is a problem
involving
one
or more
of
the
SRS
components,
the
warning
light
will
come
on
and
stay
on.
At
the
same
time,
the
warning
display
will
appear
on
the
informa-
tion screen in the multi information display
.
The
SRS
warning
light/display
is shared
by
the
SRS
airbag
and
the
seat
belt
pre-tensioner
system.
N0040790
0318
The
driver
’s airbag
is located
under
the
pad-
ded
cover
in the
middle
of the
steering
wheel.
The
front
passenger
’s airbag
is contained
in
the
instrument
panel
above
the
glove
com-
partment.
The
driver
’s airbag
and
the
front
passenger
’s airbag
are
designed
to
deploy
at
the
same
time.
However
, the
front
passen-
ger
’s airbag
does
not
deploy
when
the
front
W
AR
NING
If any
of
the
followi
ng
condi
tions
occu
r,
you
shoul
d imme
diately
have
the
airbag
syste
m in your
vehicle
inspect
ed by
an
authorized
Mitsubi
shi
Motor
s dealer
as
soon
as possible:
•The
passenger
’s airbag
off
indicator
comes
on
when
an
adult
is sitting
on
the
front
passenger
seat.
•The
passenger
’s airbag
off
indicator
does
not
com
e on
whe
n the
front
passe
nge
r’s
seat is no
t occupied
.
•The
passenger
’s airbag
off
indicator
does
not
come
on
when
the
ignition
switch
is
tur
ned to the
“ON” position.
•The
passenger
’s airbag
off
indicator
comes
on
and
goes
out
repeatedly
.
Do
not
attach
any
accessory
to your
vehi-
cle
that
make
s the
passe
nge
r’s airbag
off
indicator
difficu
lt or
impossi
ble to see.
You must
be able
to
see
the
passe
nge
r’s
airbag
off
indicator
and
verify
the
status
of the
passe
nge
r’s airbag
syste
m.
SRS warning light/display
W
AR
NING
If any
of
the
followi
ng
condi
tions
occu
r,
there may
be a problem
with the SRS
air-
bags
and/or
seat
belt
pre-tension
ers
, and
they
may
not
function
properly
in a colli-
sion
or
may
suddenly
activate
without
a
collis
ion:
•Even whe
n the
igni
tion
swi
tch is in ON,
the
SRS
war
ning
light
doe
s not
come
on
or it remains
on.
•The SRS
war
ning
light
and/
or the
war
n-
ing display
comes
on while
drivin
g.
The SRS
airb
ags
and
seat
belt
pre-ten
-
sioners
are designe
d to
help
reduce
the
risk
of serious
injur
y or death
in certai
n
collisions.If either
of
the
above
conditions
occurs,
immediately
have
your
vehicle
checked
by
an
authorized
Mitsubishi
Motors
dealer
.
Driver
’s and passenge
r’s fr
ont
airbag system

5
Features and controlsBreak-in recommendation
s ..............................................................
5-3
Keys
..........................................
.......................................................
5-3
Electronic
immobilizer
(Anti-thef
t starting system)
........................
5-4
Keyless entry system (if so equipped)
..............................................
5-7
Free-hand Advanced Security T
ransmitter
(F.A.S.T
.-key)
(if
so
equipped
)..................................................
5-12
Door locks
.......................
...............................................................
5-34
Power door locks
............
...............................................................
5-37
“Child safety locks” for
rear door
..................................................
5-38
Trunk lid
...................................
.....................................................
5-39
Inside emer
gency trunk lid
release
................................................
5-40
Theft-alarm system
................................................
........................
5-41
Power windows
...............
...............................................................
5-43
Sunroof (if so equipped
).........................................
........................
5-46
Parking brake
..................
...............................................................
5-48
Steering wheel tilt lock lever
.........................................................
5-49
Inside
day/night
rearview
mirror
...................................................
5-50
Outside
rearview
mirr
ors
...............................................................
5-51
Ignition switch
......
.................................................
........................
5-52
Steering wheel lock
................................................
........................
5-54
Starting
and
stopping
the
engine
....................................................
5-55
Manual transaxle (if so equipped)
..................................................
5-57
Continuously variable transmissi
on
(CVT)
(if
so
equipped)
..........
5-59
Electronically controlled 4WD system (if so equipped)
.................
5-68
All-wheel driving opera
tion
...........................................................
5-70
Cautions on handling of all-wheel drive vehicles
..........................
5-71
Service brake
..................
...............................................................
5-72
Brake assist system
................................................
........................
5-73
Anti-lock
braking
syst
em
.....................................
.........................
5-74
Active
Stability Control (ASC
) (if
so
equipped
)............................
5-76
Power
steering
system
..........................................
.........................
5-79
Cruise control (if so eq
uipped)
.......................................................
5-80
Tire pressure monitoring
system
...................................................
5-84
Rear
-view camera (if so
equipped
)..............
...................................
5-88
Instrument cluster
.................................................
.........................
5-90
Multi-information
disp
lay
....................................
.........................
5-91
Indicator light, warning light, and information screen display list
.................................................
..........................................
5-1
12
Indicators
.................................
....................................................
5-123
Warning lights
................
.................................................
.............
5-124
Information screen disp
lay
...................................
.......................
5-125
Combination headlights and dimmer switch
...............................
5-127
Headlight leveling switch (if
so equipped)
...................................
5-132
Turn signal lever
...................................................
.......................
5-133
Hazard warning flasher
switch
....................................................
5-133
Front fog light switch (if so
equipped)
.........................................
5-134
Wiper and washer swit
ch
......................................
.......................
5-134
Electric rear window def
ogger switch
.........................................
5-138
Horn switch
.............................
....................................................
5-139
Link System (if so equi
pped)
.......................................................
5-139
Bluetooth
® 2.0 interface (if so
equipped)
.....................................
5-139
USB input terminal
...............................................
.......................
5-162
Sun visors
......................
.................................................
.............
5-166
12 V power outlet
..........
.................................................
.............
5-166
Interior
lights
.................
.................................................
.............
5-167
Storage spaces ................
.................................................
.............
5-169

Electronic
immobilizer
(Ant
i-theft starting system)
Features and controls
5-5
5
Only
keys
that
have
been
programmed
to the
vehicle
’s electronics
can
be
used
to
start
the
veh
icle.
If you
lose
the
key
, you
can
order
a key
from
your
authorized
Mitsubishi
Motors
dealer
by
referring
to the
key
number
.
To prevent
vehicle
theft,
the
ID
code
for
the
vehicle keys must be changed. Take
your
vehicle
and
all
remaining
keys
to
your
authorized
Mitsubishi
Motors
dealer
to
have your ID code changed. To add
a key
, you
need
to register
the
ID
code
to the vehicle.Registering
the
ID
code
can
be
done
by
your
authorized
Mitsubishi
Motors
dealer
. Or
it
can
be
done
by
yourself
(except
for
vehicles
sold in Canada).
NOTE
Do
not
attach
additional
keys or accessories
to the ignition
key. Suc
h objects
coul
d pre
-
vent the driver’s knee
airba
g from
inflatin
g
normally
. Refer
to “Deployment
of front
air-
bags
” on
page
4-28.
In the
follow
ing
cas
es, the
vehicle
may
not
be
able
to recognize
the
registered
ID
code
from
the key. This means
the engi
ne will not
start
even
when
the
key
is turned
to
the
“ST
ART” position.
•When
the
key
contacts
a key
ring
or other
metallic or magnetic object (T
ype A)
•When
the
key
grip
contacts
metal
of
another
key
(Type
B)
•When
the
key
contacts
or is close
to other
immobilizer
keys
(including
keys
of
other
vehicles)
(Type
C)
In cas
es like the above
, move
the offendi
ng
object(s)
away from
the key and
turn
the key
back
to the “ACC”
or
“LOCK”
position.
Then
try
to
start
the
engine
again.
If the
engin
e does not start, con
tact
an author
ized
Mitsubishi
Motors
dealer
.
A
The
key
may
not
operate
properly
when
it is
near an object
or
facility
that emits
strong
electromagnetic
waves.
Electronic
immobilizer
is not
compatib
le
with commer
cially
availab
le remo
te starting
systems.
Use
of
commer
cially
availab
le
remo
te starting
systems
may
result
in vehicle
starting
problems
and
a loss of security
pro-
tection.A system
failure
is suspected
when
the
igni-
tion
switch
is turned
to the
“START” pos
i-
tion,
and
the
engine
does
not
start.
In such
a
cas
e,
contact
an
authorized
Mitsubis
hi
Mot
ors
dealer
.
NOTE
BC
W
AR
NING
Do not mak
e any alterations
or
addition
s
to the
immobilizer
system.
Alterations
or
addi
tions
coul
d cause
failu
re of the
immo
-
bilizer
.
Replacement keys Additional keys