navigation MITSUBISHI LANCER RALLIART 2013 8.G MMCS Manual

Navigation System Basic Operation Reference Guide 1-1
IntroductionIntroduction
Navigation System
Basic Operation Reference Guide
1 Storing the Home Location>>> “When Storing Your Home” (page 5-2)
2 Searching for the DestinationUse one of the methods below to decide the
destination
• Searching from the Map Screen>>> “Destination Setting for Scrolled Position” (page 2-8)>>> “Destination Setting” (page 3-12)
• Searching from the Address>>> “From Address/Intersection” (page 3-2)
• Searching from the Points of Interest (POI)
Name
>>> “Points of Interest (POI) Name” (page 3-5)
3 Arriving at the Destination
4 Going HomeGo back to the stored home location.>>> “Go Home” (page 3-7)
5 Deleting the Route>>> “Deleting the Route” (page 4-9)
Adding a Way PointAdd a way point to be visited on the way to the
destination.
>>> “Adding a Way Point” (page 4-6)
Deciding Locations to StoreDestinations and way points can be easily selected if
frequently visited locations are stored.
>>> “Storing a New Location” (page 5-1)
>>> “Editing a Location” (page 5-4)
Viewing the RouteThe route to the destination can be viewed.>>> “View Route” (page 4-1)
Deciding the Route Search ConditionsThe route search for the destination can be changed.>>> “Showing the Route (3 Routes)” (page 4-4)
\b \b
\f \



 \b
\b \f

Table of Contents 1-2
Table of contents
Introduction
Navigation System
Basic Operation Reference Guide ------ 1-1
Outline of the System -------------------------- 1-6
Parts Name and Functions ------------------- 1-7
Roles of the Panel Operations Keys --------------- 1-7
Role of the Steering Switch --------------------------- 1-7
GPS Measurement ------------------------------ 1-8
Error in the Current Location ------------- 1-10
Route Calculation ----------------------------- 1-12
Gracenote® music recognition service ------ 1-13
EndUser License Agreement ----------------------- 1-13
Basic Operation
Starting the MMCS ------------------------------ 2-1
Operation Instructions ---------------------------------- 2-2
Lists --------------------------------------------------------- 2-2
Menu Screens (Three Menus) --------------- 2-3
Scroll Menu ----------------------------------------------- 2-3
Navi Menu ------------------------------------------------- 2-3
Route Menu ----------------------------------------------- 2-4
Map Screen ---------------------------------------- 2-5
Current Location Screen ------------------------------ 2-5
Changing the Map Display ------------------- 2-6
Displaying the Current Location Screen ----------- 2-6
Changing the Scale ------------------------------------- 2-6
Changing Map Orientation ---------------------------- 2-7
Scrolling the Map ------------------------------- 2-8
Destination Setting for Scrolled Position ---------- 2-8
Viewing the car location ------------------------------- 2-8
Intersection Guidance ----------------------- 2-10
Guidance Map ----------------------------------------- 2-10
Turn List ------------------------------------------------- 2-10
Arrow Guide -------------------------------------------- 2-11
Listening to the Voice Guide -------------- 2-12
How to Enter Text ----------------------------- 2-13
Entering a letter ---------------------------------------- 2-13
Entering a Symbol ------------------------------------ 2-13
Deleting Text -------------------------------------------- 2-13
Switching between Upper Case and Lower Case --- 2-14
Completing the input --------------------------------- 2-14
Voice Operation -------------------------------- 2-15
To use the voice operation -------------------------- 2-15
Destination
Basic Method --------------------------------------------- 3-1
Advanced Search --------------------------------------- 3-1
Basic Method ------------------------------------- 3-2
From Address/Intersection ---------------------------- 3-2
Points of Interest (POI) Name ------------------------ 3-5
Previous 20 ----------------------------------------------- 3-7
Address Book -------------------------------------------- 3-7
Go Home -------------------------------------------------- 3-7
Advanced Search ------------------------------- 3-8
Nearby POI ----------------------------------------------- 3-8
POI along Route ----------------------------------------- 3-9
POI by Dest./Way Point ------------------------------- 3-9
POI along a Street ------------------------------------ 3-10
POI by Freeway --------------------------------------- 3-10
Map Point ----------------------------------------------- 3-11
Return Trip ---------------------------------------------- 3-11 Latitude/Longitude ------------------------------------ 3-11
Destination Setting --------------------------- 3-12
Setting as Destination -------------------------------- 3-12
Setting as Way Point --------------------------------- 3-12
Storing the Location ---------------------------------- 3-13
Route
View Route ---------------------------------------- 4-1
Route Option Icon --------------------------------------- 4-1
Remaining ------------------------------------------------- 4-2
Preview ---------------------------------------------------- 4-2
Route Outline --------------------------------------------- 4-2
Detour ----------------------------------------------- 4-3
Detour Distance ----------------------------------------- 4-3
Avoid Street ----------------------------------------------- 4-3
Editing the Route (Itinerary) ----------------- 4-4
Showing the Route (3 Routes) ----------------------- 4-4
Re-ordering ----------------------------------------------- 4-5
Adding a Way Point ------------------------------------- 4-6
Deleting ---------------------------------------------------- 4-6
Option ------------------------------------------------------ 4-7
Start Demo ---------------------------------------- 4-8
Deleting the Route ------------------------------ 4-9
\b \b
\f \


 \b
\b
\f

Starting the MMCS 2-1
Basic Operation
Basic Operation
Starting the MMCS
WARNING
Do not operate the Mitsubishi Multi Communication
System (MMCS) while driving.
Always concentrate on your driving rst. Keep your eyes and mind on the road. If distracted while
driving, you could cause an accident.

When operating the MMCS, do not park with the
engine running in a closed or poorly ventilated
area. Carbon monoxide gas, which is odorless and
extremely poisonous, can build up and cause serious
injury or death.
1 Turn “ON” the ignition switch
eng_244
eng_a002The opening screen is displayed.

If any function other than AUDIO was used last time,
go to Step 2.
NOTE(page 10-1) have
been set, when the date matches the settings, the
set icon is displayed on screen.

(page 10-9) has been set,
when the maintenance distance has been exceeded
or the maintenance timing has been exceeded, a
telop will be displayed in the opening screen.
2 Touch the desired language
eng_a600
NOTE sides can be changed by performing operations on
either the MMCS side or the meter side.
of the meter side and the MMCS side can be set
separately.
3 Touch [OK] After a moment, the display is changed to the
navigation screen.
NOTEnavigation screen is displayed rather than the screen
last used.
\b \b
\f \

 
 \b
\b \f

Starting the MMCS 2-2
Operation Instructions
With this navigation system, operations
can be performed by pressing the panel
keys or touching the screen buttons.
Operate the screen by touching lightly with
a ngertip.
mb447
WARNING

operations or concentrate on the screen. Failure to
pay attention to the road ahead may cause traf c
accidents. Have a front seat passenger perform
the operations, or stop the car in a safe location
before operating.
NOTEit with hard, sharp objects, as this may cause
malfunction.
The Screens in this ManualThe screens described in this manual are for
explanation. They may be different from actual
screens, and their operation may also be different.
Lists
This section explains the list operation
buttons when a list has been displayed.
Scrolls forward through a list one line at
a time.
Scrolls forward through a list one page
at a time.
Scrolls back through a list one line at a
time.
Scrolls back through a list one page at
a time.
\b \b
\f \

  \b
\b \f

Menu Screens (Three Menus) 2-3
Basic Operation
Menu Screens (Three Menus)
Scroll Menu
After scrolling the map, press the [ENT]
key to display.
eng_a601
1) [Set as Dest.]
Sets the cursor position as the destination.
>>> “Destination Setting for Scrolled Position” (page 2-8)
2) [Address Book]
The cursor position can be stored in the address
book.

>>> “Storing a New Location” (page 5-1)
3) [Nearby POI ]
POI can be searched for in the vicinity of the cursor position.
>>> “Nearby POI ” (page 3-8)
4) [Location check]
The positional relationship between the cursor position and the current location can be viewed.
>>> “Viewing the car location” (page 2-8)
5) [Set as RTT surveillance]
The surveillance map is stored
>>> “Storing from the Map Scroll Screen” (page 6-3)
6) Cursor
Navi Menu
Press the [MENU] key to display.
eng_a004-2
1) [Address/Intersection] The location can be searched for using the address or street name of the destination.
>>> “From Address/Intersection” (page 3-2)
2) [Point of Interest]
The location can be searched for using a POI name.

>>> “Points of Interest (POI) Name” (page 3-5)
3) [Advanced Search]
An advanced search is possible based on the POI search.

>>> “Advanced Search” (page 3-8)
4) [Previous 20] A new destination can be set from the 20 destinations that have been previously set.
>>> “Previous 20” (page 3-7)
5) [Address Book] A previously stored location can be called up and set as the destination.

>>> “Address Book” (page 5-1)
6) [Go Home]
A route can be set for returning home.

>>> “Go Home” (page 3-7)
7) [Navigation Settings]
Various functions related to the navigation can be set.
>>> “Settings” (page 11-1)
8) [Navigation Tools]
The Demo of the set route and basic information related to the navigation can be viewed.

>>> “Start Demo” (page 4-8)
9) [Route]
The [Route] button is displayed when a destination has been set.

>>> “Route Menu” (page 2-4)1)2)3)
4)
6)
5)
\b \b
\f \

  \b
\b \f

Basic Method 3-1
Destination
Destination
Navigation operations start with the location
search.
If a map of the destination can be displayed,
the route to the destination can be set and the
location can be stored in the address book.
The following search methods are available
to search for locations according to various
conditions.
Basic Method
From Address/Intersection (page 3-2)Used when the address or intersection of 2 streets at
the destination is known.
Points of Interest (POI) Name (page 3-5)Used when the name of the desired POI is known.
Previous 20 (page 3-7)A new destination can be set from the 20 destinations
that have been previously set.
Address Book (page 3-7)If a location has already been stored (page 5-1) in
the address book, it can be called up and set as the
destination.
Go Home (page 3-7)If the home location has already been stored (page
5-3), the route to go home can be set.
“POI”=Points of Interest
Advanced Search
Nearby POI (page 3-8)Searching for POI in the vicinity of the current location.
POI along Route (page 3-9)Searching for POI along the set route.
POI by Dest./Way Point (page 3-9)Searching for POI in the vicinity of the set destination/
way point.
POI along a Street (page 3-10)Searching for POI along a speci ed street.
POI by Freeway (page 3-10)Searching for POI along a freeway or in the vicinity of
the exit.
Can only be used when driving on a freeway.
Map Point (page 3-11)Searching for a location by scrolling (page 2-8) the
map.
Return Trip (page 3-11)The starting position when setting a route can be set
as a new destination.
Latitude/Longitude (page 3-11)The destination can be set by specifying the latitude/
longitude.
\b \b
\f \

 
 \b
\b \f

Start Demo 4-8
Start Demo
The set route can be viewed with a demo.

1 Display the Navi Menu, and touch
[Navigation Tools]
eng_a004-2The navigation tools screen is displayed
2 Touch [Start Demo]
eng_a672
eng_a649The demo is started.
Stop DemoStopping the demo that is operating.
1 Display the Navigation Tools
screen during the demo

2 Touch [Stop Demo]
eng_a673The demo is stopped.
\b \b
\f \

 \b \b
\b\f


Editing a Location 5-4
Editing a Location
The information about stored locations in the
address book can be edited or deleted.

1 Display the Navi Menu, and touch
[Navigation Settings]
eng_a502-2
2 Touch [Personal]
eng_a606
eng_a128-1The personal settings screen is displayed.
NOTE
location to store. Store using the same operations as
“Storing a New Location” (page 5-1).
Editing
Editing information about a stored
location.

1 Touch [Edit] of “Address Book”
in the Personal Settings screen

2 Touch the stored location to change
eng_a132
NOTETouch [Icon] to order the locations in icon sequence.
Refer to “Icons” (page 5-3) for details on the icon
priority.
alphabetical sequence.
newest at the top.
3 Touch the item to change
eng_a133
NOTE to “To Customize/Modify Address” (page 5-2)
for details on the items to change.
4 Touch [Set] after changing the
item
eng_a134Repeat steps 3 and 4 until all the desired items have
been changed.
NOTE
[Set] is not available
for “Icon”.
The change is set
by touching the
icon button.
eng_a135
\b \b
\f \

 \b \b
\b
\f

RTT (Real Time Traffi c) 6-3
RTT
Storing from the Map Scroll Screen
1 Scroll to the location to store.
Press the [ENT] key
eng_a618
2 Touch [Set as RTT surveillance]
eng_a619
3 Touch [RTT surveillance Map 1 (2, 3)]
eng_a629The data is stored to the selected number.
NOTE
has already been stored, the new data automatically
overwrites the old data and is saved.
Recalling Stored Screens
Displaying on the screen the map screens
that have been stored in advance.

1 Press the [MENU] key

2 Touch [Navigation Tools]

3 Touch [Surveillance Map (RTT)]
eng_a672
4 Touch one of the Surveillance
Map numbers.
eng_a621The stored location is displayed.
5 Touch [RTT]
eng_a622The traf c information is displayed.
NOTE
Refer to “Set as Surveillance Map” (page 6-2).
\b \b
\f \

  \b
\b
 \f

RTT (Real Time Traffi c) 6-4
RTT Options
Automatic display, icons and other settings
can be set for RTT (Real Time Traffic),
which displays traf c information such as
traf c jams and construction sites on the
map.

1 Touch [Navigation Settings]
eng_a004-2
2 Touch [RTT]
eng_a606
3 Touch each item to change the
setting
eng_a625The RTT Options screen is displayed.
Dynamic Route GuidanceAutomatic Interrupt of RTT traf c information can be
set to [On] or [Off].
RTT Icons on MapThe setting for displaying RTT icons [Show All],
[Hide All] or [Select].
When [Select] has been selected

1 After selecting Select, touch [ ]
eng_a625The RTT Icons on Map screen is displayed.
2 Touch the check boxThe icon display setting changes.
eng_a626
NOTE ] can be selected only when [Select] has been
selected.
Current StationThe RTT station can be selected manually.
NOTEat the same time, priority is given to the pay station.
current location of the vehicle.
1 Touch [Select a Station]
eng_a625
2 Touch [Search Station]
eng_a628A list the names of broadcasting stations that can be
received in the current location is displayed.
\b \b
\f \

 \b \b
\b
 \f