bluetooth MITSUBISHI MIRAGE 2014 6.G Owner's Manual
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 2014, Model line: MIRAGE, Model: MITSUBISHI MIRAGE 2014 6.GPages: 460, PDF Size: 20.86 MB
Page 273 of 460
5
Comfort controls
Vents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 2
Heater without air conditioning function (if so
equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 6
Manual air conditioning (if so equipped). . . . . . . .5- 11
Automatic air conditioning (if so equipped) . . . . .5- 17
Important air conditioning operating tips . . . . . . .5- 28
Air purifier (if so equipped) . . . . . . . . . . . . . . . . . .5- 29
AM/FM electronically tuned radio with
CD player (if so equipped) . . . . . . . . . . . . . . . . .5- 30
To play tracks from USB device (if so equipped) .5- 43
To play tracks from a Bluetooth
® device
(vehicles with Bluetooth
® 2.0 interface) . . . . . .5- 56
Steering wheel audio remote control switches
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . .5- 59
Error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 60
Handling of compact discs . . . . . . . . . . . . . . . . . . .5- 62
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5- 64
General information about your radio . . . . . . . . . .5- 65
BK0162600US.book 1 ページ 2013年3月22日 金曜日 午後2時41分
Page 312 of 460
5-40 Comfort controls
5
NOTEReset the time after the battery terminals are disconnected
and reconnected.
Seconds do not appear in the clock display, but after
adjusting the “minutes” setting, the clock begins to oper-
ate from 0 seconds.
To confirm the version number of the Gracenote
DB (vehicles with a Bluetooth
® 2.0 interface)
N00702800012
1. Press and hold the /MENU button until you hear a
beep. “GracenoteDB” will appear on the display.
Each time the /MENU button is pressed, this switches
in the order Gracenote DB, PHONE SET and cancel.
2. Press the or buttons several times to select “DB
Version” and then press the /MENU button to deter-
mine.
The Gracenote DB version is displayed.A-
/MENU button
B-
button
C-
button
BK0162600US.book 40 ページ 2013年3月22日 金曜日 午後2時41分
Page 313 of 460
Comfort controls
5-41
5
To change the language (vehicles with Bluetooth
®
2.0 interface)
N00702900013
It is possible to set the language used for voice control.
1. Press and hold the /MENU button until you hear a
beep. “GracenoteDB” will appear on the display.
2. Press the /MENU button to select “PHONE SET”.
Then press the or buttons several times to select
“LANGUAGE” and then press the /MENU button to
determine.3. Press the or buttons to select “LangChg YES” and
then press the /MENU button to determine.
4. Press the or buttons to select language and then
press the /MENU button to determine.
5. Press the or buttons to select “LangSet YES” and
then press the /MENU button to determine.A-
/MENU button
B-
button
C-
button
BK0162600US.book 41 ページ 2013年3月22日 金曜日 午後2時41分
Page 315 of 460
Comfort controls
5-43
5
NOTEThe connected audio equipment cannot be adjusted using
the vehicle’s audio system.
Depending on the connected audio equipment, it may pro-
duce noise from the speakers.
Use the connected audio equipment’s own power source,
such as its battery.
Noise may be produced from the speakers if the connected
audio equipment is used while charging it using the acces-
sory socket of the vehicle.
Do not activate the external audio input mode when no
audio equipment is connected.
Otherwise, noise may be produced from the speakers.
Connect audio equipment when the external audio input
mode is deactivated or lower the vehicle’s speaker volume
before connecting it.
Noise may be produced from the speakers if audio equip-
ment is connected after the external audio input mode is
activated.
Compared to the CD player mode and radio mode, the
vehicle’s speaker volume will be lower in the external
audio input mode. Therefore, be careful when switching
from the external audio input mode to the CD player mode
or radio mode since the speaker volume will be higher.
Do not use excessive force on the connection cord. Other-
wise, the cord and connectors may be damaged.
If the connection cord alone is left connected to the auxil-
iary audio connector, noise may be produced from the
speakers.
For information on how to connect and operate the com-
mercially available audio equipment, refer to the owner’s
manual for the commercially available audio equipment.
To play tracks from USB device
(if so equipped)
N00762200056
You can connect your iPod or USB memory device to the USB
input terminal and play music files stored in the iPod or USB
memory device.
See the following section for the types of connectable devices
and supported files.
Refer to “Types of connectable devices and supported file
specifications” on page 3-158.
See the following sections for the connecting methods, “How
to connect an iPod” on page 3-156 and “How to connect a USB
memory device” on page 3-154.
If your vehicle is equipped with a Bluetooth
® 2.0 interface,
you can play music files in your iPod or USB memory device
via voice operation.
Refer to “To play iPod tracks via voice operation” on page 5-47
and “To play USB memory device tracks via voice operation”
on page 5-55.
NOTEA file protected by copyright might not be able to play-
back.
It is recommended to adjust the equalizer of the connected
device to 0 db or neutral.
BK0162600US.book 43 ページ 2013年3月22日 金曜日 午後2時41分
Page 317 of 460
Comfort controls
5-45
5
To fast-forward/reverse the track
N00762500033
To fast-forward/reverse the current track, press the button
or button.
Fast-forward
To fast-forward the current track, press the button. While
the button is kept pressed, the track will be fast-forwarded.
Fast-reverse
To fast-reverse the current track, press the button. While
the button is kept pressed, the track will be fast-reversed.To select a desired track
N00762600034
Tr a c k u p
Press the button repeatedly until the desired track number
appears on the display.
Tr a c k d o w n
Press the button repeatedly until the desired track number
appears on the display.NOTEPressing the button once during the song will cause
the audio system to restart playback from the beginning of
the song.
To find a track from the iPod menu
N00762700077
You can select desired tracks from the “Playlists”, “Artists”,
“Albums”, “Songs” or “Genre” (vehicles with Bluetooth
® 2.0
interface) menus on your iPod.
Operate the SEL switch to select desired tracks.
The selected menu or category or track is shown in the display.
When this mode is activated by pressing the SEL switch, the
SEL indicator will be displayed in the display.
NOTETo cancel the selection, press the button to return to the
previous step.
If no operation is performed for 10 seconds or more or
other button is operated after the SEL switch has been
pressed, searching of the desired tracks is canceled.
If no operation is performed for 5 seconds or more after
the track is displayed, playback starts.
When the SEL indicator is not shown on the display and
the SEL switch is operated, the volume adjustment is acti-
vated.Press the SEL switch : To start this mode or to select the menu
or category or track.
Turn the SEL switch : To show the menu or category or track.
BK0162600US.book 45 ページ 2013年3月22日 金曜日 午後2時41分
Page 318 of 460
5-46 Comfort controls
5
To play the same track repeatedly
N00762800023
Press the RPT button during playback to show “RPT” in the
display.
To exit this mode, press the button again.To play tracks in random order
N00762900024
Press the RDM button to show “RDM” in the display.
The iPod randomly selects tracks from the current category and
plays the selected tracks.
To exit this mode, press the button again.To play tracks in each album in random order
N00763000035
Press and hold the RDM button until you hear a beep to show
“F-RDM” in the display.
The iPod randomly selects tracks in the album from the current
category and play the selected tracks.
To exit this mode, press the button again.
To switch the display
N00763100049
You can display the track titles, artist names, genre and album
titles recorded in the iPod.
The display changes as follows every time the DISP button is
pressed during playback: Album title → Track name → Artist
name → Genre (vehicles with Bluetooth
® 2.0 interface) →
Normal display.
NOTEUp to 11 characters are shown in the display at once. If the
title is cut off in the middle, press the PAGE button. The
next characters are displayed every time this button is
pressed.
If no title is stored, “NO TITLE” is shown in the display.
Characters that cannot be displayed are substituted by
“•”.
BK0162600US.book 46 ページ 2013年3月22日 金曜日 午後2時41分
Page 319 of 460
Comfort controls
5-47
5
To play iPod tracks via voice operation (vehicles
with Bluetooth
® 2.0 interface)
N00763200040
Desired tracks can be selected and played from your iPod by
“Artist”, “Album”, “Playlist” and “Genre” using voice com-
mands.
For information concerning the voice recognition function or
speaker registration function, refer to “Bluetooth
® 2.0 inter-
face” on page 3-128.
The following explains how to prepare for voice operation and
play the tracks.
Preparation for voice operation
N00763300067
To use the voice operation, press the SPEECH button (A) first.
To search by artist name
N00763400039
1. Say “Play” on the main menu.NOTEThe Bluetooth
® 2.0 interface starts recognizing the con-
nected device.
If the connected device cannot be recognized or a connec-
tion error occurs, the Bluetooth
® 2.0 interface starts an
appropriate voice guide. Follow the voice guide.
2. After the voice guide says “Would you like to play by Art-
ist, Album, Playlist or Genre?,” say “Artist”.
NOTEIf you say “Artist
3. After the voice guide says “What Artist would you like to
play?,” say the artist name.
4. If there is only one match, the system proceeds to step 6.
BK0162600US.book 47 ページ 2013年3月22日 金曜日 午後2時41分
Page 320 of 460
5-48 Comfort controls
5
5. If there are two or more matches, the voice guide will say
“More than one match was found, would you like to play
step 6.
If you say “No,” the next matching artist is uttered by the
system.NOTEIf you say “No” to three or all artist names uttered by the
system, the voice guide will say “Artist not found, please
try again” and the system returns to step 2.
Search time depends on the number of songs on your con-
nected device. Devices containing a large number of
songs may take longer to return search results.
6. After the voice guide says “Playing
system creates a playlist index for the artist.NOTEIf the confirmation function is active, the voice guide con-
firms if the artist name is correct. If the artist name is cor-
rect, say “Yes”. If not, say “No”. After the voice guide
says “Artist not found, please try again,” the system
returns to step 2.
7. The system exits the voice recognition mode and starts
playback.
To search by album title
N00763500030
1. Say “Play” on the main menu.NOTEThe Bluetooth
® 2.0 interface starts recognizing the con-
nected device.
If the connected device cannot be recognized or a connec-
tion error occurs, the Bluetooth
® 2.0 interface starts an
appropriate voice guide. Follow the voice guide.
2. After the voice guide says “Would you like to play by Art-
ist, Album, Playlist or Genre?,” say “Album”.
NOTEIf you say “Album
3. After the voice guide says “What Album would you like
to play?” say the album title.
4. If there is only one match, the system proceeds to step 6.
5. If there are two or more matches, the voice guide will say
“More than one match was found, would you like to play
step 6.
If you say “No,” the name of the next matching album is
uttered by the system.NOTEIf you say “No” to three or all album titles uttered by the
system, the voice guide will say “Album not found, please
try again” and the system returns to step 2.
BK0162600US.book 48 ページ 2013年3月22日 金曜日 午後2時41分
Page 321 of 460
Comfort controls
5-49
5
6. After the voice guide says “Playing
system creates a playlist index for the album title.NOTEIf the confirmation function is active, the voice guide con-
firms if the album title is correct. If the album title is cor-
rect, say “Yes”. If not, say “No”. After the voice guide
says “Album not found, please try again,” the system
returns to step 2.
7. The system exits the voice recognition mode and starts
playback.To search by playlist
N00763600031
1. Say “Play” on the main menu.NOTEThe Bluetooth
® 2.0 interface starts recognizing the con-
nected device.
If the connected device cannot be recognized or a connec-
tion error occurs, the Bluetooth
® 2.0 interface starts an
appropriate voice guide. Follow the voice guide.
2. After the voice guide says “Would you like to play by Art-
ist, Album, Playlist or Genre?,” say “Playlist”.
NOTEIf you say “Playlist
If the device has no playlist, the voice guide will say
“There are no playlists stored on device” and the system
returns to step 2.3. After the voice guide says “What Playlist would you like
to play?,” say the playlist name.
4. If there is only one match, the system proceeds to step 6.
5. If there are two or more matches, the voice guide will say
“More than one match was found, would you like to play
step 6.
If you say “No,” the next matching playlist name is
uttered by the system.
NOTEIf you say “No” to three or all playlist names uttered by
the system, the voice guide will say “Playlist not found,
please try again” and the system returns to step 2.
6. After the voice guide says “Playing
tem creates an index for the playlist.NOTEIf the confirmation function is active, the voice guide con-
firms if the playlist name is correct. If the playlist name is
correct, say “Yes”. If not, say “No”. After the voice guide
says “Playlist not found, please try again,” the system
returns to step 2. Refer to “Confirmation function setting”
on page 3-132.
7. The system exits the voice recognition mode and starts
playback.
BK0162600US.book 49 ページ 2013年3月22日 金曜日 午後2時41分
Page 322 of 460
5-50 Comfort controls
5
To search by genre
N00763700032
1. Say “Play” on the main menu.NOTEThe Bluetooth
® 2.0 interface starts recognizing the con-
nected device.
If the connected device cannot be recognized or a connec-
tion error occurs, the Bluetooth
® 2.0 interface starts an
appropriate voice guide. Follow the voice guide.
2. After the voice guide says “Would you like to play by Art-
ist, Album, Playlist or Genre?,” say “Genre”.
NOTEIf you say “Genre
3. After the voice guide says “What Genre would you like to
play?,” say the music type.
4. If there is only one match, the system proceeds to step 6.
5. If there are two or more matches, the voice guide will say
“More than one match was found, would you like to play
step 6.
If you say “No,” the next matching genre is uttered by the
system.NOTEIf you say “No” to three or all genres uttered by the sys-
tem, the voice guide will say “Genre not found, please try
again” and the system returns to step 2.6. After the voice guide says “Playing
creates an index for the genre.
NOTEIf the confirmation function is active, the voice guide con-
firms if the genre is correct. If the genre is correct, say
“Yes”. If not, say “No”. After the voice guide says “Genre
not found, please try again,” the system returns to step 2.
Refer to “Confirmation function setting” on page 3-132.
7. The system exits the voice recognition mode and starts
playback.
BK0162600US.book 50 ページ 2013年3月22日 金曜日 午後2時41分