ECO mode MITSUBISHI MIRAGE 2014 6.G Workshop Manual
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 2014, Model line: MIRAGE, Model: MITSUBISHI MIRAGE 2014 6.GPages: 460, PDF Size: 20.86 MB
Page 300 of 460
5-28 Comfort controls
5
NOTEWhile the mode selection is set “ ” position, the air con-
ditioning compressor will run automatically. The outside
air position will also be selected automatically.
If the mode selection is set “ ” position, you cannot turn
the air conditioning off or select the recirculation position.
This prevents the windows from fogging up.
To defog quickly, direct the air flow from the side vents
toward the door windows.
When defrosting, do not set the temperature to the maxi-
mum cool position. This will blow cool air on the window
glass and fog it up.
Important air conditioning operating tips
N00733700336
1. Park the vehicle in the shade whenever possible. Parking
in the hot sun makes the vehicle interior extremely hot
which then requires more time to cool. If it is necessary to
park in the sun, open the windows for the first few min-
utes of air conditioning to expel the hot air.
2. Afterwards, keep the windows closed when the air condi-
tioning is in use. The entry of outside air through open
windows will reduce cooling efficiency.
3. When running the air conditioning, make sure the air
intake, which is located in front of the windshield, is free
of obstructions such as leaves. Leaves collected in the air-
intake chamber may reduce air flow and plug the water
drains.Air conditioning system refrigerant and lubri-
cant recommendationsIf the air conditioning seems less effective than usual, the cause
might be a refrigerant leak.
Have the system inspected by your authorized Mitsubishi
Motors dealer or a repair facility of your choice.
BK0162600US.book 28 ページ ２０１３年３月２２日 金曜日 午後２時４１分
Page 301 of 460
Comfort controls
5-29
5
During a long period of disuseThe air conditioning should be operated for at least five min-
utes each week, even in cold weather. This includes the quick
defrosting mode. Operating the air condition system weekly
maintains lubrication of the compressor internal parts to keep
the air conditioning in the best operating condition.
Air purifier
(if so equipped)
N00733800180
The air conditioning system is equipped with an air filter to
remove pollen and dust.
The air filter’s ability to collect pollen and dirt is reduced as it
becomes dirty, so replace it periodically. For the maintenance
interval, refer to the “WARRANTY AND MAINTENANCE
MANUAL”.NOTEOperation in certain conditions such as driving on a dusty
road and frequent use of the air conditioning can lead to
reduction of service life of the filter. When you feel that
the air flow is lower than normal or when the windshield
or windows start to fog up easily, replace the air filter.
Contact your Mitsubishi Motors dealer or a repair facility
of your choice for assistance.
CAUTION
!The air conditioning system in your vehicle must be
charged with the refrigerant HFC-134a and the
lubricant ZXL 200PG.
Use of any other refrigerant or lubricant will cause
severe damage and may require replacing your vehi-
cle’s entire air conditioning system.
The release of refrigerant into the atmosphere is not
recommended.
The new refrigerant HFC-134a in your vehicle is
designed not to harm the earth’s ozone layer. How-
ever, it may contribute slightly to global warming.
It is recommended that the old refrigerant be saved
and recycled for future use.
BK0162600US.book 29 ページ ２０１３年３月２２日 金曜日 午後２時４１分
Page 303 of 460
Comfort controls
5-31
5
To adjust the tone
N00712100685
Press the /MENU button to select BASS → TREBLE →
FA D E R → BALANCE → Sound control mode off.BASS (Bass tone control)Press the sound control button either or to select the
desired bass level.TREBLE (Treble tone control)Press the sound control button either or to select the
desired treble level.FADER (Front/Rear balance control) (if equipped with
rear speakers)Press the sound control button either or to balance the
volume of sound from the front and the rear speakers.BALANCE (Left/Right balance control)Press the sound control button either or to balance the
volume of sound from the left and the right speakers.NOTEThe sound control mode will be canceled when the
another mode is selected or no adjustment is performed
for more than 10 seconds.
In a two-speakers vehicle, keep the FADER setting in the
middle position. Since no rear speakers are connected,
adjusting the FADER setting toward the “REAR” side
will result in a loss of sound output.
Radio control panel and display
N00734900915
1- RADIO (AM/FM selection) button
2- PWR (On-Off) switch
3- Display
4- Seek (Down-seek) button
5- Seek (Up-seek) button
6- Memory select buttons
BK0162600US.book 31 ページ ２０１３年３月２２日 金曜日 午後２時４１分
Page 305 of 460
Comfort controls
5-33
5
CD control panel and display
N00735300756
To listen to a CD
N00735501087
To s e t a d i s c1. Insert the disc with the label facing up.
When a disc is inserted, the CD indicator will come on
and the CD player will begin playing even if the radio is
being used. The CD player will also start playback when
the CD button is pressed with a disc in the player or with a
disc set in the Disc-loading slot, even if the radio is being
used.
2. To stop the CD, turn off the power by pressing the PWR
switch for 2 seconds or longer, or change over to the radio
mode by pressing the RADIO button, or eject the disc by
pressing the eject button.NOTEFor information on adjusting the volume and tone, refer to
“To adjust the volume” on page 5-30 and “To adjust the
tone” on page 5-31.
3 inches (8 cm) compact disc cannot be played on this CD
player.
For information concerning the handling of compact
discs, refer to “Handling of compact discs” on page 5-62.
1- CD (CD mode changeover) button
2- RADIO button
3- DISP (Display)/ (Return) button
4- CD eject button
5- CD indicator
6- Disc-loading slot
7- FOLDER indicator
8- TRACK indicator
9- Display
10- RPT (Repeat)/F-RPT (Folder repeat mode) indicator
11- RDM (Random mode)/F-RDM (Folder random mode) indi-
cator
12- SEL (Select) indicator
13- PAGE (Title scroll) button
14- (Fast-reverse/Track down) button
15- (Fast-forward/Track up) button
16- PWR (On-Off)/SEL (Select) switch
17- RPT (Repeat) button
18- RDM (Random) button
BK0162600US.book 33 ページ ２０１３年３月２２日 金曜日 午後２時４１分
Page 306 of 460
5-34 Comfort controls
5
To eject a discWhen the CD eject button is pressed, the disc automatically
stops and is ejected.NOTEIf you do not remove the disc before 15 seconds have
elapsed, the CD player will automatically reload the disc
and stop.To listen to a music CDPress the CD button if a disc is already in the CD player. The
CD player will enter CD mode and start playback. The track
number and the playing time will appear on the display. The
tracks in the disc will be played continuously.To listen to an MP3 CDThis CD player allows you to play MP3 (MPEG Audio Layer-
3) files recorded on CD-ROMs, CD-Rs (recordable CDs), and
CD-RWs (rewritable CDs) in ISO9660 Level 1/Level 2, Joliet,
and Romeo formats. Each disc can hold up to 255 files in up to
100 folders, up to a maximum of 16 levels. The ID3 tag infor-
mation can be displayed during MP3 playback. For informa-
tion concerning ID3 tags, refer to “CD text and MP3 title
display” on page 5-38.
1. Insert a disc containing MP3 files into the slot.
2. Press the CD button if a disc is already in the CD player.
The display shows “READING”, then playback will
begin.
NOTEWhile listening to a disc on which CD-DA (CD-Digital
Audio) and MP3 files have both been recorded, you can
switch between reading of the CD-DA, reading of the
MP3 files, and the external audio input mode by pressing
the CD button for 2 seconds or longer (until you hear a
beep).
For information on the external audio input, refer to “To
use the external audio input function” on page 5-42.
With a disc that contains both CD-DA and MP3 files, the
CD-DA files are automatically played first.
The playback sound quality differs depending on the
encoding software and the bit rate. For details, refer to the
user manual of your encoding software.
Depending on file/folder configurations on a disc, it may
take some time before playback starts.
MP3 encode software and writing software are not sup-
plied with this unit.
You may encounter trouble in playing an MP3 or display-
ing the information of MP3 files recorded with certain
writing software or CD recorders (CD-R/RW drivers).
If you record too many folders or files other than MP3
onto a disc, it may take some time before playback starts.
This unit does not record MP3 files.
For information on CD-Rs/RWs, refer to “Notes on CD-
Rs/RWs” on page 5-64.
BK0162600US.book 34 ページ ２０１３年３月２２日 金曜日 午後２時４１分
Page 308 of 460
5-36 Comfort controls
5
To fast-forward/reverse the discFast-forward
The disc is fast-forwarded while the button is held down.
Playback will begin once the button is released.
Fast-reverse
The disc is fast-reversed while the button is held down.
Playback will begin once the button is released.To select a desired trackTrack up
The disc will skip as many songs as the number of times the
button is pressed.
The display window will display the track number of the track
selected.
Track down
The disc will skip as many songs as the number of times the
button is pressed.
The display window will display the track number of the track
selected.
To find a file (MP3 CDs only)Operate the SEL switch to select desired file.
When this mode is activated by pressing the SEL switch, the
SEL indicator will be displayed in the display.NOTETo cancel the selection, press the button to return to the
previous step.
If no operation is performed for 10 seconds or more or
other button is operated after the SEL switch has been
turned, searching of the desired file is canceled.
If no operation is performed for 5 seconds or more after
the file is displayed, playback starts.
When the SEL indicator is not shown on the display and
the SEL switch is operated, the volume adjustment is acti-
vated.Press the SEL switch : To start this mode or to select the folder
or file.
Turn the SEL switch : To show the folder or file
BK0162600US.book 36 ページ ２０１３年３月２２日 金曜日 午後２時４１分
Page 309 of 460
Comfort controls
5-37
5
To repeat tracksTo repeat a track
Press the RPT button to repeat the same track.
If the RPT button is pressed, the RPT indicator will come on.
To exit this mode, press the button again.
To repeat songs in the same folder (MP3 CDs only)
While a song is playing, press the RPT button for 2 seconds or
longer (until you hear a beep). The F-RPT indicator will come
on and the disc will repeat all the songs in the folder that con-
tains the song currently playing.
To exit this mode, press the button again.NOTEWith a disc that contains both CD-DA and MP3 files, the
repeat mode causes only files of the same format (CD-DA
only or MP3 files only) to be repeated.To change the order of tracks for playbackRandom playback for a disc (music CDs only)
If the RDM button is pressed, the RDM indicator will come on
and the tracks that are played will be selected at random.
To exit this mode, press the button again.
Random playback for a folder (MP3 CDs only)
If the RDM button is pressed, the F-RDM indicator will come
on and the tracks that are played will be selected at random
from the folder that is currently selected.
To exit this mode, press the button again.Random playback for all folders on a disc (MP3 CDs only)
Press the RDM button for 2 seconds or longer (until you hear a
beep). The RDM indicator will come on and the tracks that are
played will be selected at random from all folders on the disc
currently selected.
To exit this mode, press the button again.
NOTEWith a disc that contains both CD-DA and MP3 files, the
random mode causes only files of the same format (CD-
DA only or MP3 files only) to be played in a random
sequence.
BK0162600US.book 37 ページ ２０１３年３月２２日 金曜日 午後２時４１分
Page 310 of 460
5-38 Comfort controls
5
CD text and MP3 title display
N00752100179
This CD player can display CD text and MP3 titles, including
ID3 tag information.
CD text
The CD player can display disc and track titles for discs with
converted disc and track title information. Press the DISP but-
ton repeatedly to make selections in the following sequence:
disc name → track name → normal display mode.NOTEThe display can show up to 11 characters. If a disc name
or track name has more than 11 characters, press the
PAGE button to view the next 11 characters.
When there is no title information to be displayed, the dis-
play shows “NO TITLE”.
Characters that the CD player cannot display are shown as
“•”.
MP3 titles
The CD player can display folder and file titles for discs with
converted folder and file information. Press the DISP button
repeatedly to make selections in the following sequence: folder
name → file name → normal display mode.ID3 tag information
The CD player can display ID3 tag information for files that
have been recorded with ID3 tag information.
1. Press the DISP button for 2 seconds or longer to switch to
the ID3 tag information.
2. Press the DISP button repeatedly to make selections in the
following sequence: album TAG → track TAG → artist
TA G → normal display mode.
NOTETo return from ID3 tag information to the folder name,
press the DISP button again for 2 seconds or longer.
When there is no title information to be displayed, the dis-
play shows “NO TITLE”.
The display can show up to 11 characters. If a folder
name, track name, or item of ID3 tag information has
more than 11 characters, press the PAGE button to view
the next 11 characters.
Characters that the CD player cannot display are shown as
“•”.
BK0162600US.book 38 ページ ２０１３年３月２２日 金曜日 午後２時４１分
Page 311 of 460
Comfort controls
5-39
5
To display the clock
N00702600010
Press the button to switch the clock mode. To exit the clock
mode, press the button.NOTEWhile the clock mode is selected, the display will switch
to the applicable operation display whenever the CD
player, external audio input mode or radio, etc. is oper-
ated. Then, if no entries are made for 7 seconds, the dis-
play will automatically return to the clock mode.
To adjust the clock
N00702700011
1. Press and hold the button and the clock display flashes.
2. Press the or button to adjust the “hours” digit.
If you keep pressing the button, fast-forward begins.
3. When the “hours” digit is adjusted, press the button to
flash the “minutes” digit.
Press the or button to adjust the “minutes” digit.
If you keep pressing the button, fast-forward begins.
4. When the time is set, press the button to stop the clock
display from flashing.
A- (Clock) button
CD player mode Clock mode Example
A- (Clock) button
B- (Clock adjustment up) button
C- (Clock adjustment down) button
BK0162600US.book 39 ページ ２０１３年３月２２日 金曜日 午後２時４１分
Page 315 of 460
Comfort controls
5-43
5
NOTEThe connected audio equipment cannot be adjusted using
the vehicle’s audio system.
Depending on the connected audio equipment, it may pro-
duce noise from the speakers.
Use the connected audio equipment’s own power source,
such as its battery.
Noise may be produced from the speakers if the connected
audio equipment is used while charging it using the acces-
sory socket of the vehicle.
Do not activate the external audio input mode when no
audio equipment is connected.
Otherwise, noise may be produced from the speakers.
Connect audio equipment when the external audio input
mode is deactivated or lower the vehicle’s speaker volume
before connecting it.
Noise may be produced from the speakers if audio equip-
ment is connected after the external audio input mode is
activated.
Compared to the CD player mode and radio mode, the
vehicle’s speaker volume will be lower in the external
audio input mode. Therefore, be careful when switching
from the external audio input mode to the CD player mode
or radio mode since the speaker volume will be higher.
Do not use excessive force on the connection cord. Other-
wise, the cord and connectors may be damaged.
If the connection cord alone is left connected to the auxil-
iary audio connector, noise may be produced from the
speakers.
For information on how to connect and operate the com-
mercially available audio equipment, refer to the owner’s
manual for the commercially available audio equipment.
To play tracks from USB device
(if so equipped)
N00762200056
You can connect your iPod or USB memory device to the USB
input terminal and play music files stored in the iPod or USB
memory device.
See the following section for the types of connectable devices
and supported files.
Refer to “Types of connectable devices and supported file
specifications” on page 3-158.
See the following sections for the connecting methods, “How
to connect an iPod” on page 3-156 and “How to connect a USB
memory device” on page 3-154.
If your vehicle is equipped with a Bluetooth
® 2.0 interface,
you can play music files in your iPod or USB memory device
via voice operation.
Refer to “To play iPod tracks via voice operation” on page 5-47
and “To play USB memory device tracks via voice operation”
on page 5-55.
NOTEA file protected by copyright might not be able to play-
back.
It is recommended to adjust the equalizer of the connected
device to 0 db or neutral.
BK0162600US.book 43 ページ ２０１３年３月２２日 金曜日 午後２時４１分