seat memory MITSUBISHI MIRAGE 2017 6.G Owners Manual

USB input terminal (if so equipped)
Features and controls 5-103
5
4. Connect the commercially available USB connector cable (D) to the vehicle’s con-nector cable (B). Be sure to hold the terminal part (A) of the connector cable as shown in the illus-tration. 5. Fix the connector cable (A, B) on the clips.
1. Turn the ignition switch to the “OFF”
e operation mode in
OFF. 2. Remove the commercially available USBconnector cable (D). Be sure to hold the terminal part (A) of the connector cable as
shown in the illus-
tration.
3. Fix the connector cable on the clips and close the glove compartment.
N00566901157
1. Park your vehicle in
a safe place and turn
the ignition switch to the “OFF” position or put the operation mode in OFF. 2. Open the glove compartment and removethe connector cable (A, B) from clips (C).
WA R N I N G An open glove comp
artment door can
cause a serious injury or death to the frontpassenger in an accident, even if the pas-senger is wearing his/
her seat be
lt. Always
keep the glove comp
artment door closed
when driving.NOTE
 Do not connect the USB memory device to the vehicle’s connect
or cable directly.
The USB memory devi
ce may be damaged.
 When closing the glove compartment, be careful not to trap the connector cable andUSB memory device.
To r e m o v e

How to connect an iPod

To connect

BK0235100US.book 103 ページ ２０１５年１１月２０日　金曜日　午後３時１２分