ignition MITSUBISHI MIRAGE 2018 Owner's Manual (in English)

4CONTROLS
The wipers will operate once.
OFF
Intermittent (Speed sensitive)
Slow
Fast
WINDSHIELD WIPERS (MIRAGE)The wipers will operate once.
OFF
Intermittent (Speed sensitive)
Slow
Fast
WINDSHIELD WIPERS (G4)
REGULAR HEADLIGHTS
Headlights and other lights on.
Parking, tail, front and rear
sidemarker lights, license plate
and instrument panel lights on.
All lights off.
Pull lever toward driver to
activate high beams.SIDE MIRROR ADJUSTMENTThe side mirrors can be adjusted when the ignition
switch is in the “ON” or “ACC” position or the
operation mode is put in ON or ACC.
Move the lever
to the same side as the mirror you
wish to adjust.
SEAT HEATER SWITCH (IF EQUIPPED)
POSITION ACTION
HI For quick heating
NEUTRAL Heater off
LO Keeps seat warm
REAR WINDOW WIPER AND WASHER (MIRAGE)
Turn the knob [B] to operate the rear
window wiper.
The wiper operates continuously
for several seconds then operates
intermittently at intervals of about 8
seconds.
Washer fluid is sprayed, the wiper will
automatically operate 2 or 3 times.

5OWN THE ROAD
CRUISE CONTROL (IF EQUIPPED)
CRUISE CONTROL ON/OFF SWITCH
Used to turn on and off the cruise control.
SET – SWITCH
Used to reduce the set speed and to set the desired
speed.
RES + SWITCH
Used to increase the set speed and to return to the
original set speed.
CANCEL SWITCH
Used to deactivate the set speed driving.
NOTE:When operating the cruise control switches, press the cruise control swi\
tches
correctly. The set speed driving may be deactivated automatically if two\
or more
switches of the cruise control are pressed at the same time. Minimum spe\
ed to
operate cruise control is about 25 mph.
TEMPERATURE INDICATOR L AMP OPERATION
1. TEMPERATURE INDICATOR ILLUMINATED GREEN
When the temperature indicator lamp is
illuminated Green this indicates the engine has
not reached normal operating temperature.
NOTE: This will result in cooler heater outlet
temperatures until engine reaches normal
operating temperatures.
2. TEMPERATURE INDICATOR LAMP OFF When the temperature indicator lamp is Off this indicates the engine is at normal
operating temperature.
3. TEMPERATURE INDICATOR LAMP ILLUMINATED RED
When the temperature indicator is illuminated Red this indicates the engine is overheating NOTE: If the engine is overheating, find a safe place to park the vehicle, then shut the
engine off and call Roadside Assistance as continued driving could cause\
the engine
to fail.
MULTI-INFORMATION DISPLAY SWITCH
Each time you lightly press the multi-information display switch (A), \
the display switches in the following order.
NOTE:
• When the ignition switch or the operation mode is in OFF, the driving ra\
nge display and average fuel consumption display are not displayed.
• While driving, the service reminder is not displayed even if you operate\
the multi-information display switch.1. Odometer
2. Trip Odometer - A
3. Trip Odometer - B
4. Miles to Empty/ Instrument Panel Light Dimmer Control
NOTE: Dimmer control is able to be used when the small (position)
light or headlight is in the ON position. Press and hold the
Multi-Information Display Switch to cycle through the different
illumination positions
5. Driving range display
6. Average fuel consumption display
7. Outside Temperature
8. Service reminder (distance)
9. Service reminder (months) (Mirage hatchback model only)

7AIR CONDITIONING AND USB CONNECTION
MANUAL AIR CONDITIONINGAUTOMATIC AIR CONDITIONING (IF EQUIPPED)
- Temperature Control Dial/Switch
- Air conditioning switch
- Mode Selection Dial/Switch
- Air Selection Lever/Switch
- Blower Speed Selection Dial/Switch
- Defogger switch
- AUTO switch
- Electric rear window defogger switch
- OFF switch
CONNECTING A USB OR SMARTPHONE DEVICE (IF EQUIPPED)
Connecting a USB or Smartphone Device
1. Park your vehicle in a safe place and turn the ignition switch to the “\
OFF” position or put the Operation Mode in OFF.
2. Plug in the USB connecting cable that is supplied with your device and connect the USB end into the input terminal
located in the floor console box.
3. Turn the ignition switch or the Operation Mode to the “ACC” position. Turn on the audio system.
4. Press MENU on your Mirage’s audio touch screen.
5. Touch USB.
6. Touch Folder then select a track and begin playback.
The phone and cord are not included in the purchase
of the vehicle.