lock MITSUBISHI MIRAGE 2018 Owner's Manual (in English)

6When the vehicle is placed in Reverse, the rearview camera system
automatically activates. A wide-angle view behind the vehicle is shown.TECHNOLOGY
KEYLESS ENTRY SYSTEM (IF EQUIPPED)REARVIEW CAMERA
START/STOP ENGINE SWITCH (IF EQUIPPED WITH FAST-KEY) ACTIVE STABILITY CONTROL (ASC) OFF SWITCH
TIRE PRESSURE MONITORING SYSTEM (TPMS)
While carrying the FAST-key within the operating range, the Start/
Stop button can be used to start the engine.

• Move the selector lever in “P” position and hold the brake
pedal Down. Push the Start/Stop button.
• To stop the engine, stop the vehicle completely and move the
selector lever to “P” then press the Start/Stop button.
*If you have to bring the engine to an emergency stop while driving, pre\
ss and
hold the Start/Stop button for 3 seconds or more, or press it quickly 3 \
times
or more.
• If you press the Start/Stop button without depressing the brake pedal, y\
ou can
change the operation mode in the order of OFF, ACC, ON, OFF.
• If the engine cannot be started or the operation mode cannot be changed,\

check the position of the FAST-key or the battery performance of the FAS\
T-key. You can deactivate the system by pressing down the “ASC OFF”
switch for 3 seconds or longer.
When the ASC is deactivated, the indicator will turn on. To reactivate
the ASC, momentarily press the “ASC OFF” switch; the indicator is \
turned off.
The Tire Pressure Monitoring System warning light illuminates
when one or more of your tires is significantly under inflated.
Please note that changes in the outside temperature may
decrease tire pressure causing the TPMS light to turn on. If the
TPMS light remains illuminated, check your tire pressure.
If the warning light illuminates, take the necessary measures referring \
to the
owner’s manual.
FAST-KEYNORMAL KEY
OPERATION INDICATOR LIGHT
LOCK (
) BUT TON
UNLOCK (
) BUT TON
TRUNK RELEASE (HOLD) BUT TON

( G 4 O N LY )
PANIC BUT TON
While carrying the FAST-key, press the driver’s door lock/unlock swit\
ch .
IF THE FAST-KEY IS NOT OPERATING PROPERLY
Remove the key from the FAST-key remote and
unlock the door manually. Then, insert the FAST-key
into the key slot in the floor console. Starting the engine and changing
the operation mode should be now possible. Remove the FAST-key from
the key slot after starting the engine or changing the operation mode.
ECO INDICATOR
This indicator will be displayed when fuel efficient driving
is achieved.

9AUDIO / BLUETOOTH®
This HD Radio receiver enables:
PSD Program Service Data: Contributes to the superior user
experience of HD Radio Technology. Presents song name,
artist, station IDs, HD2/HD3 Channel Guide, and other
relevant data streams.
HD2/HD3 Adjacent to traditional main stations are extra local FM
channels. These HD2/HD3 Channels provide new, original
music as well as deep cuts into traditional genre.
DIGITAL SOUND Digital, CD-quality sound. HD Radio Technology enables
local radio stations to broadcast a clean digital signal.
AM sounds like today’s FM and FM sounds like a CD. To Register a Bluetooth Device:
1.
Press the HOME key
2. Touch SETTING, then BLUETOOTH
3. Touch the NEW DEVICES
(If no Bluetooth devices are registered, Step 3 is not required)
• If the Bluetooth device is permitted to pair then it will allow the
connection to be made.
• Supports Ver. 2.1 + EDR
• Supported profiles: Bluetooth Audio A2DP(V1.1), AVRCP(V1.3);
Hands-free HFP(v1.5); Phonebook transfer PBAP(v1.0)
When Bluetooth is connected, 3 icons will display – the antenna level
(1 to 6), battery, Bluetooth connected (shown on the HOME screen) BLUETOOTH INFORMATION
TO ADJUST THE CLOCK
1. Press the HOME key
2. Touch SETTING, then CLOCK
- At this point, changes to the clock setting (time and format) can be
adjusted such as time format and time setting.
3. Touch SET
4. To return to the settings, touch BACK
5. The time setting changes is completed

10SMARTPHONE LINK DISPLAY AUDIO (SDA) (IF EQUIPPED)
SETTING THE CLOCK
TO CHANGE THE CLOCK ON ON YOUR SMARTPHONE DISPL AY AUDIO (SDA)
1. From the Home screen, touch Setup
2. From the Setup screen, touch Clock
You can now adjust the time and date.
SMARTPHONE LINK DISPLAY AUDIO (SDA) (IF EQUIPPED)
A
F
G
H
I
JB
C
D
E
A - CD Slot
B - Power & Volume Knob
C - EJECT Button (Eject CD)
D - SEEK Button (Selects next station or track)
E - TRACK (Selects previous station or track)
F - Tune and Illumination Knob (Radio Station)
G - HOME Button (Return to initial display)
H - RADIO (FM1, FM2, AM)
I - Touch Screen Display
J - RESET (Reboot and clear all presets)

11
ACCESSING APPLE CARPLAY™ACCESSING ANDROID AUTO™
1. Make sure your iPhone® has iOS7.1 or later and that you are using a genuine
Apple Lightning® to USB cable.
2. Connect the Apple Lightning
® to USB cable to your phone and to the vehicle’s
USB port in the Center Console.
3. Apple CarPlay will automatically connect. To use the iPhone with CarPlay even
while locked, choose “Allow” on your iPhone’s screen after the first connection.
4. You can now operate Siri by pressing and holding the Steering Wheel Audio
Speech button until prompted on the screen. 1.
You must download the Android Auto app from the Google Play Store. This
process may take up to a couple of minutes.
2. Connect your manufacturers phone cable from your phone and into the vehicles
USB port located in the Center Console.
3. Follow your phone’s on screen instruction until you are connected to Android
Auto. You can press the Speech button on the Steering Wheel Audio Controls to
activate voice operation.
Apple CarPlay, iPhone, Siri and Lightning are trademarks of Apple Inc., \
registered in the U.S. and other Countries. Android, Android Auto, Googl\
e Play and other marks are trademarks of Google Inc.
SMARTPHONE LINK DISPLAY AUDIO (SDA) (IF EQUIPPED)

12
Q: Is my phone compatible with the factory Mitsubishi Bluetooth® Hands Free System?
A: Check the list of compatible phones, www.mitsubishicars.com/owners to see if the phone is Bluetooth® supported.
Q: How do I use Bluetooth
® Audio?
A: Please refer to your Owner’s Manual for instructions.
Q: Why does my Anti-Lock Braking System (ABS) make a noise?
A: Each time your vehicle is started and driven a short distance, you will hear the sound of the ABS motor operating from the right front eng\
ine
compartment. This is the normal sound the Anti-Lock Braking System makes when performing a self check.
Q: Why does the Audio System take so long to upload my music from my audio music device?
A: The Mitsubishi system can read multiple device structures in order to catalog the music files for easy playing and listening. Depending on the amount
of music you have on your device, this may take a few minutes.
Q: How can I play music from my portable music player through the stereo system in my vehicle when equipped with the Bluetooth
® Phone System?
A: Once your device is paired to the Bluetooth® Phone System, you can stream music from your device to your vehicle’\
s sound system. No wires or cords.
Your music stops and restarts at the same song when you exit and when you re-enter the vehicle. Voice commands are not available.
Q: My Mirage has a 12V accessory outlet. What devices can I plug in to it?
A: This outlet is protected with a 15 amp fuse. Always check the current draw rating of any device prior to use in the vehicle. If the devi\
ce is rated above
10 amps, this could lead to circuit overload and the electrical fuse opening (no current flow).
Q: How can I get the MPG stated on the window sticker?
A: Vehicle driving styles will greatly affect MPG. Avoid sudden starts from a stop and let the vehicle coast to a traffic light. Both of these styles will
increase mileage and reduce brake lining wear.
• Vehicles are designed to achieve the best fuel mileage when they are driven at the speed limits on the freeway. Avoid driving over 6\
5 mph.
• Under inflated tires will increase rolling resistance and will reduce fuel mileage. Check tire pressure frequently to increase miles per \
gallon.
Proper tire pressure also ensures optimum tire performance (including tire wear.)
Q: Why does my check engine light come on after I put gas in my car?
A: There are many reasons why your check engine light may illuminate. Before calling your dealership, make sure the fuel cap is fully eng\
aged and you
have heard three clicks when tightening it. After checking and hearing three clicks and the light is still on, contact your dealership.
Q: How do I use the emergency key when the FAST-key battery or vehicle battery is run down?
A: If your Mirage is equipped with a Start/Stop Engine switch and the door does not open, take the key out from the fob and unlock the fron\
t passenger
door manually. Put the key back into the fob and insert it into the slot provided below the Climate Control Switches. Starting the engine and\
charging
the operation mode should now be possible. Remove the FAST-key from the key slot after starting the engine or charging the operation mod\
e.
FAQ’S