overheating MITSUBISHI MIRAGE 2018 Owner's Manual (in English)

5OWN THE ROAD
CRUISE CONTROL (IF EQUIPPED)
CRUISE CONTROL ON/OFF SWITCH
Used to turn on and off the cruise control.
SET – SWITCH
Used to reduce the set speed and to set the desired
speed.
RES + SWITCH
Used to increase the set speed and to return to the
original set speed.
CANCEL SWITCH
Used to deactivate the set speed driving.
NOTE:When operating the cruise control switches, press the cruise control swi\
tches
correctly. The set speed driving may be deactivated automatically if two\
or more
switches of the cruise control are pressed at the same time. Minimum spe\
ed to
operate cruise control is about 25 mph.
TEMPERATURE INDICATOR L AMP OPERATION
1. TEMPERATURE INDICATOR ILLUMINATED GREEN
When the temperature indicator lamp is
illuminated Green this indicates the engine has
not reached normal operating temperature.
NOTE: This will result in cooler heater outlet
temperatures until engine reaches normal
operating temperatures.
2. TEMPERATURE INDICATOR LAMP OFF When the temperature indicator lamp is Off this indicates the engine is at normal
operating temperature.
3. TEMPERATURE INDICATOR LAMP ILLUMINATED RED
When the temperature indicator is illuminated Red this indicates the engine is overheating NOTE: If the engine is overheating, find a safe place to park the vehicle, then shut the
engine off and call Roadside Assistance as continued driving could cause\
the engine
to fail.
MULTI-INFORMATION DISPLAY SWITCH
Each time you lightly press the multi-information display switch (A), \
the display switches in the following order.
NOTE:
• When the ignition switch or the operation mode is in OFF, the driving ra\
nge display and average fuel consumption display are not displayed.
• While driving, the service reminder is not displayed even if you operate\
the multi-information display switch.1. Odometer
2. Trip Odometer - A
3. Trip Odometer - B
4. Miles to Empty/ Instrument Panel Light Dimmer Control
NOTE: Dimmer control is able to be used when the small (position)
light or headlight is in the ON position. Press and hold the
Multi-Information Display Switch to cycle through the different
illumination positions
5. Driving range display
6. Average fuel consumption display
7. Outside Temperature
8. Service reminder (distance)
9. Service reminder (months) (Mirage hatchback model only)