bluetooth MITSUBISHI MIRAGE 2019 Owner's Manual (in English)

2
DRIVER'S VIEW
1 Side Mirror Adjustment ........... Page 4
2 Headlights ..................... Page 7
3 Windshield Wiper Lever ........... Page 7
4 Heated Seat Switch (if equipped) ...Page 9
5 Cruise Control (if equipped) ........ Page 6
6 Multi-Information Display (MID) ....Page 8
7 ASC Off Switch .................. Page 8
8 Start/Stop Engine Switch
(if equipped with F.A.S.T.-KEY) .....Page 9
9 Climate Controls ............... Page 10
10 Audio Remote Control Switch
(if equipped) ................... Page 6
11 Audio System ................. Page 12
12 Bluetooth® Controls (if equipped) ...Page 512
8
10
6
2
7
1

5STEERING WHEEL CONTROLS
To Register a Bluetooth® Device:
1. Press the HOME key
2. Touch SETTING, then BLUETOOTH
3. Touch the NEW DEVICES
(IF NO BLUETOOTH
® DEVICES ARE REGISTERED, STEP 3 IS
NOT REQUIRED)
• If the Bluetooth
® device is permitted to pair then it will allow
the connection to be made.
• Supports Ver. 2.1 + EDR
• Supported profiles: Bluetooth
® Audio A2DP(V1.1),
AVRCP(V1.3); Hands-free HFP(v1.5); Phonebook transfer
PBAP(v1.0)
When Bluetooth
® is connected, 3 icons will display – the
antenna level (1 to 6), battery, Bluetooth® connected (shown
on the HOME screen).
BLUETOOTH® INFORMATION
BLUETOOTH® CONTROLS
For a list of compatible Bluetooth® devices, please go to
http://www.mitsubishicars.com/owners
A - SPEECH BUTTON
(IF EQUIPPED)
Change to voice recognition
B - PICK-UP BUTTON
Answer an incoming call
C - HANG-UP BUTTON
End a call or voice recognition
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
1. Press the HOME key
2. Touch SETTING, then BLUETOOTH
3.
Touch the NEW DEVICES. If the Bluetooth
® device is permitted to
pair then the SDA system will allow the connection to be made.
4. Go to your phone settings to confirm pairing
If you have paired multiple Bluetooth
® devices with your SDA
system, the Bluetooth® device that connected last will be selected
and will automatically connect when it is detected.
TO SELECT A DIFFERENT DEVICE:
1. Press the HOME key
2. Touch SETTING, then BLUETOOTH
3. Touch the PAIRED DEVICES
4. Touch the “device name” to connect
5. This will complete the selection of the Bluetooth
® device
BLUETOOTH® PAIRING
ABC

15FAQ'S
Q: Is my phone compatible with the factory Mitsubishi Bluetooth® System?
A: Check the list of compatible phones, www.mitsubishicars.com/owners to se\
e if the phone is Bluetooth® supported.
Q: How do I use Bluetooth
® Audio?
A: Please refer to your Owner’s Manual for instructions.
Q: Why does my Anti-Lock Braking System (ABS) make a noise?
A: Each time your vehicle is started and driven a short distance, you will hear the sound of the ABS motor operating from the right fro\
nt
engine compartment. This is the normal sound the Anti-Lock Braking System makes when performing a self check.
Q: Why does the Audio System take so long to upload my music from my audio \
music device?
A: The Mitsubishi system can read multiple device structures in order to catalog the music files for easy playing and listening. Depe\
nding
on the amount of music you have on your device, this may take a few minutes.
Q: How can I play music from my portable music player through the stereo sy\
stem in my vehicle when equipped with the Bluetooth®
Phone System?
A: Once your device is paired to the Bluetooth® Phone System, you can stream music from your device to your vehicle’s sound system. No
wires or cords. Your music stops and restarts at the same song when you exit and when you\
re-enter the vehicle. Voice commands are
not available.
Q: My Mirage has a 12V accessory outlet. What devices can I plug in to it?\
A: This outlet is protected with a 15 amp fuse. Always check the current draw rating of any device prior to use in the vehicle. If th\
e device
is rated above 10 amps, this could lead to circuit overload and the electrical fuse opening (no current flow).
Q: How can I get the MPG stated on the window sticker?
A: Vehicle driving styles will greatly affect MPG. Avoid sudden starts from a stop and let the vehicle coast to a traffic light. Both \
of these
styles will increase mileage and reduce brake lining wear.
• Vehicles are designed to achieve the best fuel mileage when they are dri\
ven at the speed limits on the freeway. Avoid driving over
65 mph.
• Under inflated tires will increase rolling resistance and will reduce fu\
el mileage. Check tire pressure frequently to increase miles per
gallon. Proper tire pressure also ensures optimum tire performance (including tire wear.)
Q: Why does my check engine light come on after I put gas in my car?
A: There are many reasons why your check engine light may illuminate. Befor\
e calling your dealership, make sure the fuel cap is fully
engaged and you have heard three clicks when tightening it. After checki\
ng and hearing three clicks and the light is still on, contact
your dealership.
Q: How do I use the emergency key when the F.A.S.T.-KEY battery or vehicle battery is run down?
A: If your Outlander is equipped with a Start/Stop Engine Switch and the door does not unlock, take the key out from the fob and unlo\
ck
the door manually. Put the key back into the fob and insert it into the slot provided bel\
ow the Climate Control Switches. Starting the
engine and changing the operation mode should now be possible. Remove the F.A.S.T.-KEY from the key slot after starting the engine or
changing the operation mode.