check engine light MITSUBISHI MIRAGE 2019 Owner's Manual (in English)

8INSTRUMENT CLUSTER
1. TEMPERATURE INDICATOR LAMP ILLUMINATED GREEN
When the temperature indicator lamp is illuminated
Green this indicates the engine has not reached normal
operating temperature.
NOTE: This will result in cooler heater outlet temperatures
until engine reaches normal operating temperatures.
2. TEMPERATURE INDICATOR LAMP OFF
When the temperature indicator lamp is Off this indicates
the engine is at normal operating temperature.
3. TEMPERATURE INDICATOR LAMP ILLUMINATED RED
When the temperature indicator is illuminated Red this
indicates the engine is overheating
NOTE: If the engine is overheating, find a safe place
to park the vehicle, then shut the engine off and call
Roadside Assistance as continued driving could cause the
engine to fail.
TEMPERATURE INDICATOR LAMP OPERATION
MULTI-INFORMATION DISPLAY SWITCH
Each time the multi-information
display switch is operated, the
buzzer sounds and the
multi-information display
changes between information
such as warnings, trip
odometer, average and
momentary fuel consumption,
distance range, etc.
TIRE PRESSURE MONITORING SYSTEM (TPMS)
The Tire Pressure Monitoring System
light illuminates when one or more of
your tires is significantly under inflated.
Please note that changes in the outside
temperature may decrease tire pressure
causing the TPMS light to turn on. If the
TPMS light remains illuminated, check
your tire pressure. If the warning light
illuminates, take the necessary measures
referring to the owner’s manual.
ECO INDICATOR
This indicator will be
displayed when fuel efficient
driving is achieved.
You can deactivate the system by pressing down
the “ASC OFF” switch for 3 seconds or longer. When
the ASC is deactivated, the display/indicator will
turn on.
To reactivate the ASC, momentarily press the “ASC
OFF” switch; the display/indicator is turned off.
ACTIVE STABILITY CONTROL (ASC) OFF SWITCH

15FAQ'S
Q: Is my phone compatible with the factory Mitsubishi Bluetooth® System?
A: Check the list of compatible phones, www.mitsubishicars.com/owners to se\
e if the phone is Bluetooth® supported.
Q: How do I use Bluetooth
® Audio?
A: Please refer to your Owner’s Manual for instructions.
Q: Why does my Anti-Lock Braking System (ABS) make a noise?
A: Each time your vehicle is started and driven a short distance, you will hear the sound of the ABS motor operating from the right fro\
nt
engine compartment. This is the normal sound the Anti-Lock Braking System makes when performing a self check.
Q: Why does the Audio System take so long to upload my music from my audio \
music device?
A: The Mitsubishi system can read multiple device structures in order to catalog the music files for easy playing and listening. Depe\
nding
on the amount of music you have on your device, this may take a few minutes.
Q: How can I play music from my portable music player through the stereo sy\
stem in my vehicle when equipped with the Bluetooth®
Phone System?
A: Once your device is paired to the Bluetooth® Phone System, you can stream music from your device to your vehicle’s sound system. No
wires or cords. Your music stops and restarts at the same song when you exit and when you\
re-enter the vehicle. Voice commands are
not available.
Q: My Mirage has a 12V accessory outlet. What devices can I plug in to it?\
A: This outlet is protected with a 15 amp fuse. Always check the current draw rating of any device prior to use in the vehicle. If th\
e device
is rated above 10 amps, this could lead to circuit overload and the electrical fuse opening (no current flow).
Q: How can I get the MPG stated on the window sticker?
A: Vehicle driving styles will greatly affect MPG. Avoid sudden starts from a stop and let the vehicle coast to a traffic light. Both \
of these
styles will increase mileage and reduce brake lining wear.
• Vehicles are designed to achieve the best fuel mileage when they are dri\
ven at the speed limits on the freeway. Avoid driving over
65 mph.
• Under inflated tires will increase rolling resistance and will reduce fu\
el mileage. Check tire pressure frequently to increase miles per
gallon. Proper tire pressure also ensures optimum tire performance (including tire wear.)
Q: Why does my check engine light come on after I put gas in my car?
A: There are many reasons why your check engine light may illuminate. Befor\
e calling your dealership, make sure the fuel cap is fully
engaged and you have heard three clicks when tightening it. After checki\
ng and hearing three clicks and the light is still on, contact
your dealership.
Q: How do I use the emergency key when the F.A.S.T.-KEY battery or vehicle battery is run down?
A: If your Outlander is equipped with a Start/Stop Engine Switch and the door does not unlock, take the key out from the fob and unlo\
ck
the door manually. Put the key back into the fob and insert it into the slot provided bel\
ow the Climate Control Switches. Starting the
engine and changing the operation mode should now be possible. Remove the F.A.S.T.-KEY from the key slot after starting the engine or
changing the operation mode.