battery MITSUBISHI OUTLANDER HYBRID 2014 3.G Owners Handbook

Downloaded from www.Manualslib.com manuals search engine 18
Pressing the switch again deactivates the demister. Alternatively, after about 15 to 20 minutes, the demister automatically turns off. Use the demister only when the READY
indicator is illuminated to prevent the auxiliary battery from going dead.
04 ECO Mode switch
The ECO mode supports fuel-efficient eco driving by automatically controlling the plug-in hybrid Electric Vehicle system and the air conditioner.
When the READY indicator is illuminated, pressing the ECO mode switch activates the ECO mode.
Pressing the switch again deactivates the ECO mode. While the ECO mode is active, the relevant indicator lamp on the instrument cluster stays illuminated.
02 Hazard warning flasher switch
Use the hazard warning flasher when you have to park your vehicle on the road
such as when a failure has occurred.
When the switch is pressed, all of the turn-signal lamps and the corresponding indicator lamps on the instrument cluster start blinking. When the switch is pressed again, the lamps and indicators stop blinking.
03 Rear window demister switch
When the power switch is set to ON,
pressing this switch activates the rear window demister and the indicator lamp on the switch illuminates.
Indicator lamp
Air conditioner ON/OFF
Press the air conditioning switch.
Air conditioning indicator
Press the AUTO switch.
AUTO mode
AUTO mode indicator

Downloaded from www.Manualslib.com manuals search engine 20
01 Electric remote-controlled
outside rear-view mirrors switch
Angle adjustment
Set the L-R selector lever to the side you want to adjust. Then, using the adjustor switch, move the mirror up or down, or to the left or to the right.
Retractor switch
Press this switch to retract the outside rear-view mirrors. Pressing the switch again reopens the mirrors.
02 Electric window control
All of the door windows can be opened and closed from the switch console beside the driver’s seat. Push down the switch to open the window. Lift up the switch to close the window. If the driver’s door window switch is pushed down hard, the window opens completely. If the driver’s door window switch is lifted up hard, the window closes completely.
Lock switch
Driver’s door window switch
Front passenger’s door window switch
Rear right door window switch
Rear left door window switch
Multi information display switch
Information screen pop-up
Odometer, outside temperature
Fuel remaining amount, selector lever position, drive battery level
If the lock switch is set to ON, it is no longer possible to open or close the front passenger’s and rear door windows using the switches located there. Pressing the lock switch again cancels the lock.
03 Multi information display
Every time the multi information display switch is pressed, a buzzer sounds. The display shows a wide range of information including warnings, service reminder, average fuel consumption, EV cruising range, and energy flow.
L-R selector leverRetractor switch
Adjustor switch
04 Child protectionBy setting the lever on a rear door to LOCK and then closing the door, it is no longer possible to open the door from the inside regardless of the position of the door lock knob.
This safety feature can be used when children are sitting in the rear seats.

Downloaded from www.Manualslib.com manuals search engine 21
If a warning lamp stays illuminated or keeps blinking, check the details in the owner’s manual and contact your MITSUBISHI MOTORS Authorised Service Centre.
Turn-Signal Indicator/Hazard Warning Indicator Lamps
These lamps blink when:— the turn-signal lever is operated— the hazard warning indicator switch is pressed— the hazard warning indicator starts blinking automatically after hard braking
High-Beam Indicator Lamp
This lamp illuminates when the headlamps are switched to high-beam.
Charging Indicator
This indicator lamp illuminates when the traction battery is being charged using a normal or quick charging cable.
Acoustic Vehicle Alerting System OFF Indicator Lamp
This indicator lamp illuminates when the acoustic vehicle alerting system is deactivated.
Plug-In Hybrid Electric Vehicle System Warning Lamp
This lamp illuminates when there is a Plug-In Hybrid Electric Vehicle system fault.
RBS (Regenerative Brake System) Warning Lamp
This lamp illuminates when there is an RBS failure.
READY Indicator
The indicator keeps blinking while the plug-in hybrid Electric Vehicle system is activated. The indicator stops blinking and stays illuminated when the start-up process is completed and the system is ready for driving.
Auxiliary Battery Charge Warning Lamp
The lamp illuminates when there is a charging system fault.
Indicator and warning lamps on the instrument cluster