brake fluid MITSUBISHI OUTLANDER HYBRID 2014 3.G Owners Handbook
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 2014, Model line: OUTLANDER HYBRID, Model: MITSUBISHI OUTLANDER HYBRID 2014 3.GPages: 28, PDF Size: 2.72 MB
Page 24 of 28
Downloaded from www.Manualslib.com manuals search engine 22
Folding down the rear seat creates more luggage space.
Folding down the rear seat
1. Lower the headrests completely.
2. Stow away the seat belt for the centre seating position, if applicable.
- Please refer to “Rear-centre 3-point type seat belt” and “Rear seat belt storage” under the “Seat belts” section of the safety equipment chapter of the owner’s manual.
3. Lift the front side of the seat cushion. Then, flip the seat cushion forward.
4. Tilt down the seat buckles. Then, pull up the lever on the seat backrest and fold the backrest forward.
5. To use the rear seat again, raise the seatback and then the buckles. Align the hook and the groove of the seat cushion and push down the front side of the cushion.
6. Check that the seat belt buckles are above the seat cushion.
Seat belt buckle
Hook
Brake Warning Lamp
This lamp illuminates when:— the parking brake is applied— the brake fluid level is too low— there is a braking system fault
SRS Air Bag/Pretensioner Warning Lamp
This lamp illuminates when there is a fault with the SRS air bag or the pretensioner system.
Active Stability Control (ASC) Indicator Lamp
This lamp blinks when ASC is activated, and illuminates when there is an ASC failure.
Active Stability Control (ASC) OFF Indicator Lamp
This lamp illuminates when ASC is deactivated with the ASC OFF switch or when there is an ASC failure.
Seat Belt Reminder Warning Lamp
This lamp illuminates or blinks when the driver’s seat belt is not fastened.
Check Engine Warning Lamp
This lamp illuminates or blinks when there is an engine control system fault.
ABS Warning Lamp
This lamp illuminates when there is an ABS system fault.
Luggage area arrangement