power steering MITSUBISHI OUTLANDER HYBRID 2014 3.G Owners Handbook

Downloaded from www.Manualslib.com manuals search engine 11
Around the steering wheel 1
Windscreen washer
Pulling the lever towards you, injects washer fluid, and the wiper makes several sweeps.
Rear window wiper and washer
INT: The wiper and washer operate several times intermittently, and thereafter at intervals of about 8 seconds.
OFF: The wiper and washer remain stopped.
: Washer fluid is injected and the wiper makes several sweeps.
With the front wiper on and reverse selected the rear wiper sweeps twice.
01 Wiper and washer switch
The switch is enabled when the power switch is set to ON or ACC.
The following lever/knob positions are available.
Windscreen wiper
MIST: The wiper makes one sweep — convenient in drizzle.
OFF: The wiper remains stopped.
AUTO: The wiper, sensitive to rain drops, operates automatically according to the intensity of rain.
LO: The wiper operates at low speed.
HI: The wiper operates at high speed.

Downloaded from www.Manualslib.com manuals search engine 13
07 Power switch
Using the keyless operation key, you can start or stop the Plug-In Hybrid Electric Vehicle system or switch between the power modes if the key is located within its operation range shown on the left.
• To start the Plug-In Hybrid Electric Vehicle system, engage the parking brake, depress the brake pedal, and then press the power switch. The READY indicator on the instrument cluster should stop blinking and stay constantly illuminated, indicating that the startup has been completed.
• To stop the Plug-In Hybrid Electric Vehicle system, stop the vehicle, press the electrical parking switch, set the selector position to and then press the power switch.
• If the Plug-In Hybrid Electric Vehicle system needs to be stopped immediately in an emergency while driving, press and hold the power switch for more than 3 seconds or press it at least three times in quick succession. (This should not be carried out except in an emergency.)
Operation range of the key
Around the steering wheel 2
• To switch between the power modes (OFF/ACC/ON), press the power switch without depressing the brake pedal. The selected power mode can be identified by the colour of the indicator lamp on the switch. The indicator lamp on the
switch is not illuminated while the Plug-In Hybrid Electric Vehicle system is off.
• If you cannot start the Plug-In Hybrid Electric Vehicle system or switch between the power modes, the keyless operation key may be in a place where the signal is poor or the key’s battery may have run out.
OFF : Lamp ex tinguishedACC: Lamp illuminated in orangeON : Lamp illuminated in blue