turn signal MITSUBISHI OUTLANDER HYBRID 2014 3.G Owners Handbook

Downloaded from www.Manualslib.com manuals search engine 18
Pressing the switch again deactivates the demister. Alternatively, after about 15 to 20 minutes, the demister automatically turns off. Use the demister only when the READY
indicator is illuminated to prevent the auxiliary battery from going dead.
04 ECO Mode switch
The ECO mode supports fuel-efficient eco driving by automatically controlling the plug-in hybrid Electric Vehicle system and the air conditioner.
When the READY indicator is illuminated, pressing the ECO mode switch activates the ECO mode.
Pressing the switch again deactivates the ECO mode. While the ECO mode is active, the relevant indicator lamp on the instrument cluster stays illuminated.
02 Hazard warning flasher switch
Use the hazard warning flasher when you have to park your vehicle on the road
such as when a failure has occurred.
When the switch is pressed, all of the turn-signal lamps and the corresponding indicator lamps on the instrument cluster start blinking. When the switch is pressed again, the lamps and indicators stop blinking.
03 Rear window demister switch
When the power switch is set to ON,
pressing this switch activates the rear window demister and the indicator lamp on the switch illuminates.
Indicator lamp
Air conditioner ON/OFF
Press the air conditioning switch.
Air conditioning indicator
Press the AUTO switch.
AUTO mode
AUTO mode indicator

Downloaded from www.Manualslib.com manuals search engine 19
Checking locking/unlocking
You can check as follows whether or not the doors/tailgate are locked/unlocked.
The room lamps blink only when the lamp switch is in the middle () position.
Front door switch
Door switch
OPEN switch
Tailgate switch
LOCK switch
UNLOCK switch
Electric tailgate switch (VRX only)
Convenient features
Component*1Default (factory) setting
LockingUnlocking
Turn-signal lamp1 blink2 blinks
Room lamps—Illuminate for about 15 seconds
Outside buzzer*21 buzzing sound2 buzzing sounds
Locking/unlocking the doors by keyless operation or keyless entry
*1: The factory setting can be changed. For details, contact your MITSUBISHI MOTORS Authorised Service Point.*2: Available with Keyless Operation.
Keyless operationThe front doors and the tailgate can be locked/unlocked by pressing the door switch or the tailgate switch. You need to carry the keyless operation key with you and the key needs to be within its operation range, which is within about 70 cm from the front door handle or the tailgate handle.
Keyless entryPressing the LOCK switch locks all of the doors and the tailgate. Pressing the UNLOCK switch unlocks all of the doors and the tailgate. If you do not open a door or the tailgate within about 30 seconds of pressing the UNLOCK switch, all of the doors and the tailgate are locked again.
If your vehicle is equipped with the electric tailgate, the tailgate can be opened just by pressing
the electric tailgate switch.
LOCK switch
02
03
01

Downloaded from www.Manualslib.com manuals search engine 21
If a warning lamp stays illuminated or keeps blinking, check the details in the owner’s manual and contact your MITSUBISHI MOTORS Authorised Service Centre.
Turn-Signal Indicator/Hazard Warning Indicator Lamps
These lamps blink when:— the turn-signal lever is operated— the hazard warning indicator switch is pressed— the hazard warning indicator starts blinking automatically after hard braking
High-Beam Indicator Lamp
This lamp illuminates when the headlamps are switched to high-beam.
Charging Indicator
This indicator lamp illuminates when the traction battery is being charged using a normal or quick charging cable.
Acoustic Vehicle Alerting System OFF Indicator Lamp
This indicator lamp illuminates when the acoustic vehicle alerting system is deactivated.
Plug-In Hybrid Electric Vehicle System Warning Lamp
This lamp illuminates when there is a Plug-In Hybrid Electric Vehicle system fault.
RBS (Regenerative Brake System) Warning Lamp
This lamp illuminates when there is an RBS failure.
READY Indicator
The indicator keeps blinking while the plug-in hybrid Electric Vehicle system is activated. The indicator stops blinking and stays illuminated when the start-up process is completed and the system is ready for driving.
Auxiliary Battery Charge Warning Lamp
The lamp illuminates when there is a charging system fault.
Indicator and warning lamps on the instrument cluster