windshield wipers MITSUBISHI OUTLANDER III 2018 User Guide

Fuses
Vehicle care and maintenance 9-27
9
N00954801430
This fuse list shows the names of the elec
trical systems and their fuse capacities.
There are spare fuses in the main fuse block cover in the engine
compartment. Always replace a bl
own fuse with one of the same
capacity as the
original.Fuse load capacities Passenger compartment
fuse location table
Main fuse block
Sub fuse block
No.
Sym-bol
Electrical system
Capacity
1
Power window con-
trol
30 A*
2 Defogger 30 A*
3 Heater 30 A4 Windshield wipers 30 ANo.
Sym-bol
Electrical system
Capacity
5 Door locks 20 A6 Rear fog light 10 ANo.
Sym-bol
Electrical system
Capacity
BK0249100US.book 27 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Cleaning the outside of your vehicleVehicle care and maintenance 9-41
9
N00945600187
1. To clean, lightly wi
pe the leather with a
soft cloth soaked in a 5% solution of gen-tle soap and water.2. To rinse, dip the cloth in fresh water,wring it out well, and wipe off all thesoap.3. To preserve and protect, use a leather pro-tecting agent on the genuine leather sur-face.
N00945700058
To protect your vehicle’s
finish, wash it often
and thoroughly. If desired, you may wax yourvehicle using a nonabrasive automobile wax.
N00945800033
Industrial pollution, road tar, bird droppings,tree sap, insect remain
s, sea water and other
foreign matters can damage the finish on yourvehicle.Generally, the longer any foreign materialstays on the finish, the worse the damage.Wash your vehicle as soon as possible when-ever the finish gets soiled.
N00945901709
Chemicals contained in the dirt and dustpicked up from air, rain, snow, or road sur-faces can damage the paint and body of yourvehicle if left on.Frequent washing and wa
xing is the best way
to protect your vehicle from this damage.Do not wash the vehicl
e in direct sunlight.
Park the vehicle in the shade and spray it withwater to remove dust.
Next, using plenty of
clean water and a car
washing mitt or sponge,
wash the vehicle from top to bottom.Use a mild car washing soap if necessary.Rinse thoroughly and wipe
dry with a cham-
ois or soft cloth. Af
ter washing the vehicle,
carefully clean the join
ts and flanges of the
doors, hood, etc., wher
e dirt is likely to
remain.
NOTE
If fuzzing is difficult to remove from the seatupholstery, draw a suitable defuzzing brushover the surface in
one direction.
Genuine leather
(if so equipped)
NOTE
If genuine leather is we
t with water, wipe it
with a dry, soft cloth. If left damp, mildewmay grow.The genuine leather su
rface can be damaged
if brushed with a nylon or synthetic fiberbrush.Organic solvents such as benzine, kerosene,alcohol, gasoline, or acid
or alkaline solvents
can discolor the genuine
leather surface and
should not be used.Genuine leather can
mildew if not kept
clean. Clean up any o
il stains immediately.
The genuine leather surface may harden andshrink if it is exposed to the direct sunlightfor long hours. When your vehicle is parked,place it in the shade as much as possible.When the temperature of the vehicle interiorrises in summer, vinyl products left on thegenuine leather seat
may deteriorate and
stick to the seat.
Cleaning the outside of your vehicle Foreign material
NOTE
Wa s h i n g
CAUTIONWhen washing the underside of your vehicleor the wheels, wear a pair of gloves to pro-tect your hands.If your vehicle is equipped with the rain sen-sor, place the wiper switch lever in the“OFF” position to
deactivate the rain sensor
before washing the vehi
cle. Otherwise, the
wipers will operate in
the presence of water
spray on the windshield and may get dam-aged as a result.
BK0249100US.book 41 ページ ２０１７年５月１０日　水曜日　午前８時４９分