tailgate MITSUBISHI OUTLANDER PHEV 2017 (in English) User Guide
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 2017, Model line: OUTLANDER PHEV, Model: MITSUBISHI OUTLANDER PHEV 2017Pages: 548, PDF Size: 25.5 MB
Page 63 of 548

NOTElMake  sure  that  the  inner  lid  is  completely
closed.
If  the  charging  lid  is  forcibly  closed  without completely  closing  inner  lid,  the  hinge  on
the inner lid may be broken.
l While  the  charging  lid  is  open,  if  the  doors
and  tailgate  are  locked  with  the  central  door
lock, the keyless entry system or the keyless operation  system,  the  charging  lid  will  lock
when the charging lid is closed.
l When the operation mode is switched to ON
while  the  charging  lid  is  not  completely
closed,  a  warning  may  be  displayed  on  the information  display  of  the  multi  information
display.
Refer  to  “Warning  display  list”  on  page
6-25.
Quick charging (charging method with quick charger)*
3-20OGGE17E1Charging3  
Page 72 of 548

Keys.................................................................................................... 4-02Key number tag................................................................................... 4-03
Electronic immobilizer (Anti-theft starting system)........................... 4-03
Keyless entry system...........................................................................4-03
Keyless operation system.................................................................... 4-06
Doors................................................................................................... 4-14
Central door locks............................................................................... 4-16
Dead Lock System*............................................................................ 4-17
“Child-protection” rear doors..............................................................4-18
Tailgate*..............................................................................................4-19
Electric tailgate*................................................................................. 4-20
Inside tailgate release.......................................................................... 4-27
Security alarm system*....................................................................... 4-27
Electric window control...................................................................... 4-34
Sunroof*.............................................................................................. 4-36Locking and unlocking 
OGGE17E14 
Page 74 of 548

Key number tagE00312701122
The  key  number  is  stamped  on  the  tag  as  in-
dicated in the illustration.
Make  a  record  of  the  key  number  and  store the  key  and  key  number  tag  in  separate  pla-ces,  so  that  you  can  order  a  key  from  yourMITSUBISHI  MOTORS   Authorized  Service
Point in the event the original keys are lost.Electronic immobilizer
(Anti-theft starting system) E00300202996
The  electronic  immobilizer  is  designed  tosignificantly  reduce  the  possibility  of  vehicle
theft.  The  purpose  of  the  system  is  to  immo-
bilize the vehicle if an invalid start is attemp-
ted.  A  valid  start  attempt  can  only  be  ach- ieved  by  using  a  key  “registered”  to  the  im-mobilizer system.
NOTEl If  the  plug-in  hybrid  EV  system  does  not
start,  we  recommend  you  to  contact  yourMITSUBISHI  MOTORS   Authorized  Serv-
ice Point.
l If  you  lose  one  of  keyless  operation  keys,
contact  your  MITSUBISHI  MOTORS  Au-
thorized  Service  Point  as  soon  as  possible. To  obtain  a  replacement  or  extra  spare  key,
take  your  vehicle  and  all  remaining  keys  to
your  MITSUBISHI  MOTORS  Authorized
Service Point. All the keys have to be re-reg- istered  in  the  immobilizer  computer  unit.
The immobilizer can register as follows.
• Keyless  operation  key:  up  to  4  different
keysCAUTIONl Do not modify or add parts to the immobiliz-
er  system.  Doing  so  could  cause  the  immo- bilizer to malfunction.Keyless entry system
E00300304438
Press the remote control switch, and all doors and the tailgate will be locked or unlocked as
desired.  It  is  also  possible  to  operate  the  out-
side rear-view mirrors.
1- LOCK switch
2- UNLOCK switch
3- Electric tailgate switch*
4- Indication lamp
5- Charging timer cancel switch*
NOTEl The  charging  lid  is  also  locked/unlocked,
when the driver’s door is locked/unlocked.
Key number tag
4-03OGGE17E1Locking and unlocking4      
Page 75 of 548

To lock
Press the LOCK switch (1). All the doors andthe  tailgate  will  be  locked.  The  turn-signal
lamps will blink once when the doors and the
tailgate are locked.
To unlock
Press  the  UNLOCK  switch  (2).  All  the  doors
and the tailgate will be unlocked. If the doors and  tailgate  are  unlocked  when  the  frontroom lamp switch is in the “DOOR” positionor the rear room lamp switch is in the middle
(•) position, the room lamp will illuminate for
approximately 15 seconds and the turn-signal lamps will blink twice.
The position and tail lamps can also be set to
turn  on  for  approximately  30  seconds.  Refer to  “Instruments and controls: Welcome light”
on page 6-59.
NOTEl For  the  operation  of  the  Electric  tailgate
switch  (3),  refer  to  “Electric  tailgate”  onpage 4-20.
l For the operation of the Charging timer can-
cel  switch  (5),  refer  to  “MITSUBISHI Re-
mote Control” on page 3-24.NOTEl The door and tailgate unlock function can be
set  so  that  only  the  driver’s  door  unlocks
when  the  UNLOCK  switch  (2)  is  pressed once.
If the door and tailgate unlock function is set
to work as described above, all the doors and
the  tailgate  unlock  when  the  UNLOCK switch is pressed two times in succession.
Refer to “Setting of door and tailgate unlock
function” on page 4-05.
l If the UNLOCK switch (2) is pressed and no
door  or  tailgate  is  opened  within  approxi-mately  30  seconds,  relocking  will  automati-
cally occur.
l If  either  of  the  following  problems  occurs,
the battery may be exhausted.
• The  remote  control  switch  is  operated  at
the  correct  distance  from  the  vehicle,  but
the  doors  and  tailgate  are  not  locked/
unlocked in response.
• The indication lamp (4) is dim or does not
come on.
For  further  information,  please  consult your MITSUBISHI MOTORS Authorized
Service Point.
If you replace the battery yourself, refer to
“Procedure  for  replacing  the  remote  con-
trol switch battery” on page 4-06.
l It is possible to modify functions as follows:
For  further  information,  please  contact  your MITSUBISHI  MOTORS   Authorized  Serv-
ice Point.
On  vehicles  equipped  with  the  Smartphone Link  Display  Audio  or  the  MITSUBISHINOTEMulti-Communication  System  (MMCS),
screen  operations  can  be  used  to  make  theadjustment.  Refer  to  the  separate  owner’s
manual for details.
• The  time  for  automatic  relocking  can  be
changed.
• The confirmation function (flashing of the
turn-signal  lamps)  can  be  set  to  operateonly  when  the  doors  and  backdoor  arelocked  or  only  when  the  doors  and  back-
door are unlocked.
• The  confirmation  function  (this  indicates
locking or unlocking of the doors and tail-
gate  with  the  blink  of  the  turn-signal lamps) can be deactivated.
• The  number  of  times  the  turn-signal
lamps  are  flashed  by  the  confirmation function can be changed.Operation of the outside rear-
view mirrors (Vehicles equip- ped with mirror retractorswitch)
E00310801581
To fold
Within  30  seconds  of  locking  the  doors  and tailgate using the LOCK switch (1), press the LOCK  switch  twice  rapidly  to  fold  the  out-
side rear-view mirrors.
Keyless entry system
4-04OGGE17E1Locking and unlocking4    
Page 76 of 548

To extend
Within  30  seconds  of  unlocking  the  doors
and  tailgate  using  the  UNLOCK  switch  (2),
press  the  UNLOCK  switch  twice  rapidly  to return  the  outside  rear-view  mirrors  to  their
extended positions.
The outside rear-view mirrors are not initially
set  to  work  as  described  above.  If  you  want them to work as described above, you need to
set  them  so  that  they  do  not  retract/extend when  the  doors  and  tailgate  are  locked/
unlocked  using  the  keyless  entry  system  or
keyless operation function.
Refer  to  “Starting  and  driving:  Outside  rear-
view mirrors” on page 7-09.
For  details,  please  consult  a  MITSUBISHI
MOTORS Authorized Service Point.
In  a  vehicle  equipped  with  the  Smartphone Link  Display  Audio  or  the  MITSUBISHI
Multi-Communication  System  (MMCS),  it  is possible  to  change  the  setting  by  means  of
screen operations.
Refer  to  the  separate  owner’s  manual  for  de- tails.
NOTEl The  outside  rear-view  mirrors  automatically
retract  when  all  the  doors  and  tailgate  are
locked using the keyless operation function.
Refer  to  “Starting  and  driving:  Outside  rear- view mirrors” on page 7-09.
l The  keyless  entry  system  does  not  operate
when the door or tailgate is open.
l The remote control switch will operate with-
in  approximately  4  m  from  the  vehicle.
However,  the  operating  range  of  the  remote control  switch  may  change  if  the  vehicle  is
located  near  a  power  station,  or  radio/TV broadcasting station.
l If your remote control switch is lost or dam-
aged,  please  contact  your  MITSUBISHI
MOTORS  Authorized Service Point for a re-
placement remote control switch.
l If  you  wish  to  add  a  remote  control  switch,
we  recommend  you  to  contact  your
MITSUBISHI  MOTORS   Authorized  Serv-
ice Point.
The below remote control switches are avail-
able for your vehicle.
• Keyless  operation  key:  up  to  4  remote
control switchesSetting of door and tailgate un-
lock function
E00310301368
The  door  and  tailgate  unlock  function  can  be set to the following two conditions.
Each  time  the  door  and  tailgate  unlock  func-
tion  is  set,  a  chime  will  sound  to  tell  you  the condition  of  the  door  and  tailgate  unlock
function.Number of chimesConditionOne chimeAll  doors  and  the
tailgate unlockTwo chimesDriver’s  door  unlock only
1. Put the operation mode in OFF.
2. Place  the  combination  headlamps  and
dipper switch in the “OFF” position, and leave the driver’s door open.
3. Press  the  LOCK  switch  (1)  for  4  to  10
seconds  and  press  the  UNLOCK  switch
(2) during this time.
4. Release in sequence the LOCK and UN-
LOCK  switches  within  10  seconds  of pressing the LOCK switch in step 3.
NOTEl The  charging  lid  is  also  unlocked,  when  the
driver’s door is unlocked.
l On  vehicles  equipped  with  the  Smartphone
Link  Display  Audio  or  the  MITSUBISHI
Multi-Communication  System  (MMCS), screen  operations  can  be  used  to  make  theadjustment.  Refer  to  the  separate  owner’s
manual for details.
Keyless entry system
4-05OGGE17E1Locking and unlocking4   
Page 77 of 548

Procedure for replacing the re-mote control switch battery
E00309501243
Before  replacing  the  battery,  remove  static
electricity from your body by touching a met- al grounded object.
WARNINGl Danger  of  explosion  if  battery  is  incor-
rectly replaced.
Replace  only  with  the  same  battery  or  an equivalent type.CAUTIONl When  the  remote  control  switch  case  is
opened,  be  careful  to  keep  water,  dust,  etc. out.  Also,  do  not  touch  the  internal  compo-
nents.NOTEl You  may  purchase  a  replacement  battery  at
an electric appliance store.
l A 
MITSUBISHI  MOTORS  Authorized
Service Point can replace the battery for you
if you prefer.
1. With  the  MITSUBISHI   mark  facing
you,  insert  the  cloth  covered  tip  of  a
straight  blade  (or  minus)  screwdriver  in-
to the notch in the remote control switch
case and use it to open the case.NOTEl Be  sure  to  perform  the  procedure  with  the
MITSUBISHI   mark  facing  you.  If  the
MITSUBISHI   mark  is  not  facing  you  when
you open the remote control switch case, the transmitter may come out.
2. Remove the old battery.
3. Install  a  new  battery  with  the  +  side  (A)
up.+ side- sideCoin type battery CR2032
4. Close the case firmly.
5. Check  the  keyless  operation  function  to
see that it works.
Keyless operation system
E00305601738
The  keyless  operation  system  allows  you  tolock  and  unlock  the  doors  and  tailgate  andstart  the  engine  simply  by  carrying  the  key-less operation key with you.
The keyless operation key can also be used as
the  keyless  entry  system  remote  control
switch.
Refer  to  “Keyless  entry  system”  on  page 4-03.
 
Keyless operation system
4-06OGGE17E1Locking and unlocking4      
Page 78 of 548

The  driver  should  always  carry  the  keylessoperation key. This key is necessary for lock-
ing  and  unlocking  the  doors  and  tailgate,
starting  the  engine  and  otherwise  operating the vehicle, so before locking and leaving the vehicle,  be  sure  to  check  that  you  have  the
keyless operation key.WARNINGl People  with  implantable  cardiac  pace-
makers or implantable cardiovascular-de-
fibrillators should not go near the exterior transmitters  (A)  or  the  interior  transmit-
ters (B). The radio waves used by the key-
less  operation  system  could  adversely  af- fect  implantable  cardiac  pacemakers  orimplantable cardiovascular-defibrillators.WARNINGl When  using  electro-medical  devices  other
than  implantable  cardiac  pacemakers  or implantable  cardiovascular-defibrillators,
contact  the  electromedical  device  manu- facturer  ahead  of  time  to  determine  theaffects of radio waves on the devices. Elec-
tromedical  device  operations  could  be  ad-
versely effected by radio waves.
You  can  limit  the  possible  operations  of
the  keyless  operation  system  in  the  fol-
lowing  ways.  (The  keyless  operation system  can  be  used  as  a  keyless  entry system.)  Please  consult  a  MITSUBISHI
MOTORS Authorized Service Point. • You  can  limit  operations  to  locking
and unlocking the doors and tailgate.
• You  can  limit  operations  to  starting
the engine.
• The  keyless  operation  system  can  be
disabled.
When  keyless  operation  system  opera- tions  are  modified,  the  operating  trans-mitters are as follows. • Only  locking  and  unlocking  doors  or
tailgate:  exterior  transmitter  and  inte-
rior transmitters.
• Only  starting  the  engine:  interior
transmitter.
NOTEl The  keyless  operation  key  uses  an  ultra-
weak electromagnetic wave. In the following
cases,  the  keyless  operation  system  may  not
operate properly or may be unstable.
• When  there  is  equipment  nearby  that
emits strong radio waves, such as: a pow-
er station, a radio/TV broadcasting station or an airport.
• The  keyless  operation  system  is  carried
together  with  a  communications  device such  as  a  cellular  phone  or  radio  set,  or
with  an  electronic  device  such  as  a  per- sonal computer.
• The  keyless  operation  key  is  touching  or
covered by a metal object.
• A  keyless  entry  system  is  being  used
nearby.
• When the keyless operation key battery is
worn out.
• When  the  keyless  operation  key  is  placed
in  an  area  with  strong  radio  waves  or noise.
In such cases, use the emergency key.
Refer  to  “To  operate  without  using  the
keyless  operation  function”  on  page 4-14.
Keyless operation system
4-07OGGE17E1Locking and unlocking4     
Page 79 of 548

NOTElBecause  the  keyless  operation  key  receives
signals  in  order  to  communicate  with  the transmitters  in  the  vehicle,  the  battery  con-tinually  wears  down  regardless  of  keylessoperation  key  use.  The  battery  life  is  1  to  3
years, depending on usage conditions. When the battery wears out, replace the battery ac-cording  to  the  description  in  this  manual  or
have  it  replaced  at  your  MITSUBISHI
MOTORS Authorized Service Point.
Refer to “Procedure for replacing the remote control switch battery” on page 4-06.
l Because the keyless operation key continual-
ly  receives  signals,  strong  radio  wave  recep-
tion  could  affect  battery  wear.  Do  not  leave
the  key  near  a  TV,  personal  computer,  or other electronic device.Operating range of the keyless
operation system
E00305701641
If you are carrying the keyless operation key, enter the operating range of the keyless oper-
ation  system,  and  press  the  driver’s  or  front
passenger’s door lock/unlock switch, the tail-
gate  LOCK  switch  or  the  tailgate  open
switch, the ID code for your key is verified.
You  can  lock  and  unlock  the  doors  and  tail-
gate  and  start  the  engine  only  if  the  ID  codesof your keyless operation key and the vehicle
match.NOTEl If  the  keyless  operation  key  battery  is  wear-
ing  out  or  there  are  strong  electromagnetic
waves  or  noise  present,  the  operating  range
may  become  smaller  and  operation  may  be-
come unstable.Operating range for locking
and unlocking the doors andtailgate
E00306201601
The  operating  range  is  about  70  cm  from  the
driver’s  door  handle,  front  passenger’s  door handle, and tailgate handle.
*:Forward direction:Operating rangeNOTEl Locking  and  unlocking  operate  only  when
you  press  a  door  or  tailgate  switch  that  de-
tects the keyless operation key.
l Operation may not be possible if you are too
close to the front door, door window, or tail-
gate.
Keyless operation system
4-08OGGE17E1Locking and unlocking4       
Page 80 of 548

NOTElEven  if  the  keyless  operation  key  is  within
70 cm of the driver’s door handle, front pas- senger’s  door  handle,  or  tailgate  handle,  ifthe  key  is  near  to  the  ground  or  high  up,  the
system may not operate.
l If the keyless operation key is within the op-
erating range, even someone not carrying the key  can  lock  and  unlock  the  doors  and  tail-gate by pressing the driver’s or front passen-ger’s  door  lock/unlock  switch,  the  tailgate
lock switch or the tailgate open switch.Operating range for starting the
Plug-in Hybrid EV System and changing the operation mode
E00306301484
The  operating  range  is  the  interior  of  the  ve- hicle.
*:Forward direction:Operating rangeNOTEl Even if it is within the operating range, if the
keyless  operation  key  is  in  a  small  item
holder  such  as  the  glove  box,  on  top  of  the instrument  panel,  door  pocket  or  in  the  lug-gage  area,  it  may  be  impossible  to  start  the
engine.
l If  a  keyless  operation  key  is  too  close  to  the
door  or  door  window,  it  may  be  possible  to
start  the  engine  or  change  the  operation
mode even when the key is outside the vehi- cles.To operate using the keyless
operation function
E00305802434
NOTEl The  charging  lid  is  also  locked/unlocked,
when the driver’s door is locked/unlocked.
Locking the doors and tailgate
When  you  are  carrying  the  keyless  operation
key,  if  you  press  the  driver’s  or  front  passen- ger’s door lock/unlock switch (A), or the tail-
gate  LOCK  switch  (B)  within  the  operating range, the doors and the tailgate are locked.
The turn-signal lamps will blink once.
Also refer to “Locking and unlocking: Doors,
Central  door  locks,  Tailgate”  on  page  4-14,
“Central  door  locks”  on  page  4-16 and
“Tailgate*” on page 4-19.Driver’s or front passenger’s door  
lock/unlock switches
Keyless operation system
4-09OGGE17E1Locking and unlocking4     Tailgate switches  
Page 81 of 548

NOTElFor vehicles equipped with the mirror retrac-
tor  switch,  the  outside  rear-view  mirrors  au-
tomatically  retract  when  all  the  doors  and
tailgate  are  locked  using  the  keyless  opera- tion function.
Refer  to  “Starting  and  driving:  Outside  rear- view mirrors” on page 7-09.
l The  keyless  operation  function  does  not  op-
erate under the following conditions:
• The  keyless  operation  key  is  inside  the
vehicle.
• A door or the tailgate is open or ajar.
l The  tailgate  open  switch  (C)  can  be  used  to
check that the vehicle is locked properly.Press the tailgate open switch within approx-
imately  3  seconds  of  locking  the  vehicle.  If
you wait longer than 3 seconds and press the tailgate  open  switch,  the  doors  and  tailgate
will be unlocked.
l The time allowed for checking that the vehi-
cle  is  locked  can  be  adjusted.  For  further  in- formation,  please  contact  your
MITSUBISHI  MOTORS   Authorized  Serv-
ice Point.
On  vehicles  equipped  with  the  Smartphone
Link  Display  Audio  or  the  MITSUBISHI
Multi-Communication  System  (MMCS), screen  operations  can  be  used  to  make  the
adjustment.  Refer  to  the  separate  owner’s
manual for details.Unlocking  the  doors  and  tail-
gate
When  you  are  carrying  the  keyless  operation
key,  if  you  press  the  driver’s  or  front  passen- ger’s door lock/unlock switch (A), or the tail-gate  open  switch  (B)  within  the  operating
range,  all  the  doors  and  the  tailgate  are  un-
locked.
If  the  front  room  lamp  switch  is  in  the “DOOR”  position  or  the  rear  room  lampswitch  is  in  the  middle  (•)  position  at  this
time,  the  room  lamp  will  turn  on  for  15  sec-
onds. The turn-signal lamps will blink twice. If the driver’s or front passenger’s door lock/
unlock switch is pressed and any of the doors or  tailgate  is  not  opened  within  approximate-
ly  30  seconds,  relocking  will  automatically occur.
Also refer to “Locking and unlocking: Doors,
Central  door  locks,  Tailgate”  on  page  4-14,
“Central  door  locks”  on  page  4-16 and
“Tailgate*” on page 4-19.Driver’s and front passenger’s door lock/unlock switches
Keyless operation system
4-10OGGE17E1Locking and unlocking4 Tailgate switches