NISSAN 350Z 2003 Z33 Navigation Manual

6 HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
Setting with thePoint of Interest (POI)key ............................................................... 6-2
Setting with the
Listkey .................... 6-2
Setting with the
Categorykey ............ 6-4
Setting with the
Statekey .................. 6-7
Setting with the
Citykey .................. 6-9
Setting with the
Nearbykey............. 6-11
POI ca tegories ........................................... 6-12
Setting the nearby display icons ............... 6-13

SETTING WITH THE
Point of Interest (POI)KEY
The keys in Point of Interest (POI) are List, Cat-
egory , State/Province, City and Nearby , and
they are explained below.
1. First press the DEST button.
2. Select the
Point of Interest (POI) key on
the [DEST . SETTING (POI)] screen.
SETTING WITH THEListKEY
TheList key is used when you know the ex-
act names of the destinations and waypoints.
1. Input the facility name for your destination,
then select the
List key .NOTE:
For a speedier search, input the
state/province, city and category before
searching for your desired destination.
INFO:
If the system detects that the number of cor-
responding facilities or cities is five or less, the
display shows the list screen automatically .
2. The display shows the screen to select a fa-
cility or
Info key .
INV1521
INV1583
INV1584
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-2

When theNext Search key is selected, it is
possible to narrow down categories,
states/provinces and cities.
T o use this function, refer to “Setting with the
Category key”, “Setting with theState key”
and “Setting with the
City key” on pages 6-4,
6-7 and 6-9.3. When a facility name is selected, the display
shows the [DEST . SETTINGS (POI)] screen
to set the destination.
T o set priorities, select the
OK key . Then,
the route calculation will be started.
When you alter the destination or set
waypoints, select the
Waypoint key .
Please refer to “Making the system guide
the route with detailed options” on page
5-27.
When the
Info key next to the facility
name of your choice is selected in step 2,
the display shows the detailed [Address]
and [T elephone number] of the selected fa-
cility , and the
Map andEnter keys.
INV1585INV1586INV1587
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-3

When setting the facility as the destination,
select the
Enter key . The display shows
the [DEST . SETTING (POI)] screen to set
the destination.
Set priorities and select the
OK key .
Then, the route calculation will be started.
When you alter the destination or set
waypoints, select the
Waypoint key .
Please refer to “Making the system guide
the route with detailed options” on page
5-27.
When the
Map key is selected, the dis-
play shows the map. When the PUSH EN-
TER button is pressed, the display shows
the
Destination key .
SETTING WITH THECategory
KEY
TheCategory key is used when you select a
facility category to set the destination.
1. Select the
Category key .
INV1586INV1589INV1590
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-4

2. The display shows the screen to select cat-
egories.
Input a category name.INFO:
When the
Last 5 Categories key is selected
in step 2, the previous five settings will be
listed.3. The display shows the category list.
Select a category name.
INFO:
When the
REST AURANT key is selected, the
screen to input the cuisine type will be dis-
played.
INV1591INV1592INV1593
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-5

4. The screen returns to the [DEST . SETTINGS
(POI)] screen.
When the category is set, the display shows
the selected category beside the
Category key .
Input the facility name.
INFO:

If you do not know the facility name you
want to go to, select the
List key so that
the facility names in the category will be
listed in alphabetical order .
It may take some time to show the list, de-
pending on categories.
5. When a facility name is input, the system
retrieves the facility name according to the
selected category and the input letters.
Then, the display shows the screen to select
a facility and
Info key .
Please refer to “Setting with the
List key”
on page 6-2.When the
Next Search key is selected, it is
possible to narrow down states/provinces and
cities within the selected category .
T o use this function, refer to “Setting with the
State key” and “Setting with theCity key”
on pages 6-7 and 6-9.
INV1594
INV1595
INV1596
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-6

SETTING WITH THEStateKEY
TheState key is used when you select a
state/province to set the destination.
1. Select the
State key .2. The display shows the screen to select
states/provinces.
Input a state/province name.INFO:
When the
Last 5 States key is selected in
step 2, the previous five settings will be listed.
INV1597INV1598INV1599
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-7

3. The display shows the state/province list.
Select a state/province name.4. The screen returns to the [DEST . SETTINGS
(POI)] screen.
When the state/province is set, the display
shows the selected state/province next to
the
State key .
Input the facility name.
INFO:
If you do not know the facility name, select the
Category key to retrieve a facility . When the
facility is set from the
Category key , the dis-play shows the selected facility beside the
Category key .
5. When a facility name is input, the system
retrieves the facility according to the se-
lected state/province and the input letters.
Then, the display shows the screen to select
a facility and
Info key .
Please refer to “Setting with the
List key”
on page 6-2.
INV1600INV1601
INV1602
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-8

When theNext Search key is selected, it is
possible to narrow down categories and cities
within the selected state/province.
T o use this function, refer to “Setting with the
Category key” and “Setting with theCity
key” on pages 6-4 and 6-9.
SETTING WITH THECityKEY
TheCity key is used to retrieve a facility from
the specified city to set the destination.
1. Select the
City key .

The display shows the screen to select cit-
ies.2. Input a city name.
INV1603INV1604INV1605
INV1606
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-9

INFO:
When the
Last 5 Cities key is selected in
step 2, the previous five settings will be listed.
3. The display shows the city list.
Select a city of your choice.4. The screen returns to the [DEST . SETTINGS
(POI)] screen.
When the city is set, the display shows the
selected city beside the
City key .
Input the facility name of your choice.
INFO:

If you do not know the facility name, select
the
Category key to retrieve a facility .
When the facility is set from the
Category
key , the display shows the selected facility
beside the
Category key .
It may take some time to show the list, de-
pending on categories.
5. When the facility name is input, the system
retrieves the facility name according to the
selected city and the input letters. Then, the
display shows the screen to select a facility
and
Info key .
Please refer to “Setting with the
List key”
on page 6-2.
INV1607
INV1608
INV1609
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-10