light NISSAN 350Z 2005 Z33 Navigation Manual

Select the conditions with high priorities.
If you want to get to your destination in the
shortest time, select the
Shortest Time key.
Selecting the key will turn the indicator light in
the key ON, and selecting the key again will turn
the indicator light OFF.
INFO:

When you select theOK key at this point,
route calculation will start without any addi-
tional waypoints.

Press the PREVIOUS button to display the
[EDIT ROUTE] screen.
It is also possible to set a waypoint by
selecting the
Waypoint key in the [DEST.
SETTING] screen.
Setting the priorities for route
calculationAfter the setting of destinations and waypoints is
completed, set the calculation conditions such
as route type with high priorities.
1. Select the
Priorities key.
The screen for setting calculation conditions will
appear. The conditions with the indicator light
ON will have high priority.
INFO:
When the ROUTE button is pressed on the
map and theEdit Route key is selected, the
INV1551
INV1552
5-34
How do I program a destination?


04.7.6/Z33-N


[EDIT ROUTE] screen will be displayed.
2. Select the conditions with high priorities.
Select each key on the screen to turn its
respective indicator light ON or OFF.
Shortest Timekey:
The route to the destination is calculated so that
you can reach the destination in the shortest
time. In some cases, a freeway or toll road with
detours may be recommended.
NOTE:
It may not be the shortest time in all cases.Shortest Distancekey:
The route to the destination is calculated so that
it is the shortest distance.
NOTE:
It may not be the shortest distance in all
cases.Minimize Toll Roadkey:
The route to the destination is calculated with
minimum use of toll roads.Minimize FWYkey:
The route to the destination is calculated with
minimum use of freeways.Use Time Restricted Roadskey:
The route using time restricted roads is calcu-
lated.
INV1553
How do I program a destination?
5-35


04.7.6/Z33-N


4. Select the facility you wish to display, and
press the PUSH ENTER button.
INFO:
Every time the PUSH ENTER button is pressed,
the indicator lights of the items are turned ON
and OFF alternately.
ON: To display nearby icons.
OFF: To stop displaying nearby icons.The icons of the selected facilities will be dis-
played.
INFO:
When the MAP button is pressed, the current
location will be displayed.
When the PREVIOUS button is pressed, the
previous screen will reappear.
INV1614
INV1615
6-16
How do I use the Point of Interest (POI) feature?


04.7.6/Z33-N


“Freeway entrance on your right onto (road
number and direction).”NOTIFICATION OF A FREEWAY
JUNCTION“In about one mile (1.6 kilometers), keep to the
right (left) onto (road number and direction), then
in a quarter of a mile keep to the left (right).”
“Keep to the right (left) onto (road number and
direction), then in a quarter mile (400 meters)
keep to the left (right) onto (road number and
direction).”
“Keep to the left (right) onto (road number and
direction).”NOTIFICATION OF AN EXIT FROM
A FREEWAY“In about one mile (1.6 kilometers), exit on your
right.”
“Take the second exit on your right.”NOTIFICATION OF THE VEHICLE
APPROACHING A DESTINATIONOrdinary road:
When the vehicle approaches a destination, the
voice will say, “You have arrived at your destina-
tion. Ending route guidance.” For the remainderof the way, please find your direction on the map
display.
Dark green road:
After passing the last turning point on a sug-
gested route, the voice will say, “En route to your
destination, some roads contain incomplete map
data. Turn guidance will not be provided in this
area.”
When approaching the end point of the sug-
gested road, the voice will say, “Entering the
road with incomplete map data. Please use the
direction arrow and distance information to pro-
ceed to your destination.”
This is available during route guidance, from the
time after the route calculation is completed until
the vehicle arrives at the destination.
Press the VOICE button.
The current condition will be announced.
INFO:

If you press the VOICE button when you are
off the suggested route and when the auto-
matic reroute function is off, the voice will
announce: “Proceed to the highlighted
route.”

If you press the VOICE button when you are
going in the wrong direction, the voice will
INV1685
REQUESTINGCURRENT VOICE
INFORMATION
How do I use the voice guidance feature?
10-3


04.7.6/Z33-N


INFO:

When the key is selected, the green indicator
light will light up.

When the MAP button is pressed after the
display setting, the [CURRENT LOCATION]
screen will appear.
When the PREVIOUS button is pressed,
the previous screen will reappear.You can manually scroll the map to check the
location of your choice.
INV1700
INV1701
SCROLLINGTHE MAP
How do I adjust the display?
11-9


04.7.6/Z33-N


3. Select the
Turn List key. A list of destinations, waypoints and guide points
will be displayed. Guidance will be made at each
guide point for which direction to turn.
The distance between the guide points and the
travel time will also be displayed.
It may take time to prepare the turn list. In such
cases, the
Turn List key will be highlighted and
you cannot select it until calculation is com-
pleted.
INFO:

In the turn list, turning points more than 60
miles (100 km) away from the current vehicle
location will not be displayed.
When calculated routes include a freeway,
information about freeway entrances and ex-
its will also be displayed.
INV1708
INV1709
11-12
How do I adjust the display?


04.7.6/Z33-N


4. Select the
Map Background key.
The display brightness will be altered.
HOW TO USE THE
(DAY/
NIGHT) BUTTON
1. Press the
button.
2. When the
button is pressed, the
screen will repeatedly switch between normal
lighting and dimmer lighting independently of
turning on or off of illumination.
INV1738
INV1739
How do I adjust the display?
11-25


04.7.6/Z33-N


To order updated mapping DVD-ROMs or addi-
tional DVD-ROMs, please contact the NISSAN
NAVIGATION SYSTEM HELPDESK at:

ADDRESS: P.O. Box 2082, Burlingame, CA
94011

E-MAIL: [email protected]

WEB SITE: www.zenrin.com

PHONE: 1-888-661-9995

HOURS: 6:00 AM to 5:00 PM (Pacific Time)
CAUTION

Handle a DVD-ROM by its edges.
Never touch the surface of the disc.

To clean a disc, wipe the surface from
the center to the outer edge using a
clean, soft cloth. Do not wipe the disc
using a circular motion.
Do not use a conventional record
cleaner, benzine, thinner or alcohol
intended for industrial use.
A new disc may be rough on its inner
and outer edges. Remove the rough
edges using the side of a pen or
pencil as illustrated.

Never attempt to use a DVD-ROM
that has been cracked, deformed, or
repaired using adhesive. Doing so
may cause damage to the equipment.

Handle the DVD-ROM carefully to avoid con-
tamination or flaws. Otherwise, signals may
not be read properly.

Do not write, draw or attach anything on any
side of the DVD-ROM.

Do not store the DVD-ROM in locations
exposed to direct sunlight or in high tempera-
tures or humidity.

Always place the discs in the storage case
when they are not being used.

Do not put on any sticker or write anything on
either surface of the DVD-ROM.
ABOUT THE NAVIGATION MAP
DVD-ROM1. This navigation map DVD-ROM has been
prepared by ZENRIN CO., LTD. under li-
SIH0082
HOW TO ORDER MAP DATA
DVD-ROM UPDATESHOW TO HANDLE THE DVD-ROM13-2
Information on map data discs


04.7.6/Z33-N


Symptom Possible cause Remedy
The location names differ, between Planview and
Birdview
.This is because the displayed information is reduced
so that the screen does not become too crowded.
There is also a chance that several names of the
roads or locations will be displayed, and the names
appearing on the screen may be different because of
a processing procedure.This should not be regarded as abnormal.
The vehicle icon is not shown correctly. The vehicle might have moved with the ignition off, for
example on a ferry boat or car transporter.Drive the vehicle with the GPS on for some distance.
The screen does not switch to night screen even after
turning the headlights on.When the lights were last turned on, the last setting
was the daytime screen.Turn the headlights on again, go to [DISPLAY SET-
TINGS] screen and set it to the night screen.
The map does not scroll even when the vehicle is
traveling.The display is not switched to the map screen.
Press the
MAP
button.
The vehicle icon does not show up. The display is not switched to the map screen.
Press the
MAP
button.
GPS indicator on the screen remains gray. GPS signals are not received because the vehicle is
indoors or in the shade of buildings.Move the vehicle to outdoors with a clear view of the
sky.
GPS signals are not received because some objects
are placed on the instrumental panel.Remove the objects from the instrumental panel.
GPS satellites are in poor locations. Please wait for the satellites to move to better loca-
tions.
VEHICLE ICON14-4
Troubleshooting guide


04.7.6/Z33-N


Symptom Possible cause Remedy
A route with many detours is suggested. If there are restrictions (such as one-way traffic) on
roads close to the starting point or destination, the
system may suggest a detoured route.Try slightly moving the starting point or destination.
The landmark description does not correspond to the
actual one.This may be caused by insufficient or incorrect data
on the DVD-ROM.Exchange the Map DVD-ROM. The new DVD-ROM
will be updated.
The suggested route does not exactly connect to the
starting point, waypoints, or destination.There is no data for route calculation closer to these
points.Set these points on the main road displayed in thick
orange. Please note that in some cases even main
roads lack the data for route calculation.
ROUTE CALCULATION
Troubleshooting guide
14-11


04.7.6/Z33-N