key NISSAN 350Z 2005 Z33 Navigation Manual

4. Select the
Yes key. 5. When the
Yes key is selected, the stored
data will be cleared, and the [NAVIGATION
SETTINGS] screen will appear.This navigation system can calculate and display
the expected arrival time to the destination. To
do this, set average vehicle speeds when driving
on freeways, main roads and ordinary roads.
The following settings are available.

Freeway
Default: 55 MPH (90km/h)
Max: 70MPH (110km/h)
Min: 40MPH (60km/h)

Main Roads
Default: 25 MPH (40km/h)
Max: 50MPH (80km/h)
Min: 10MPH (20km/h)

Ordinary Roads
Default: 15 MPH (25 km/h)
Max: 35 MPH (55 km/h)
Min: 5 MPH (10km/h)
1. Press the SETTING button.
INV1468
INV1469
SETTINGTHE AVERAGE SPEED
4-22
How do I operate the NISSAN Navigation System?


04.7.6/Z33-N


2. Select the
Navigation key on the [SET-
TINGS] screen.3. Select the
Set Average Speed for Estimated Journey Timekey on the [NAVIGATION SETTINGS]
screen.4. Move the joystick upward or downward to
select an item you want to change.
5. Move the joystick left or right and set an
average vehicle speed.
INFO:

It is possible to set the item illuminated in
yellow.

When the
Return All Settings to Default
key is selected, all settings return to default.
INV1466
INV1471
INV1472
How do I operate the NISSAN Navigation System?
4-23


04.7.6/Z33-N


5 How do I program a destination?Various ways to set the destination (or waypoint) ........ 5-2
Expert mode categories ................................................. 5-2
Easy mode categories ................................................... 5-3
Setting with the
Address Book key ....................... 5-3
Setting with thePrevious Dest. key ........................ 5-5
Setting with theStreet Address key ........................ 5-7
Setting with theIntersection key............................. 5-14
Setting with thePoint of Interest (POI) key ......... 5-21
Setting with theCity key ........................................... 5-21
Setting with thePhone Number key ...................... 5-25
Setting with theMap key ......................................... 5-28Setting with the
Country key ................................... 5-29
Setting with theHome key (in easy mode) .......... 5-30
Having the system guide you to the destinations....... 5-31
Making the system guide the route with detailed
options .............................................................................. 5-32
Adjusting and deleting the preset destination
(waypoints) ............................................................................ 5-39
To delete a destination ................................................ 5-41
All clear .................................................................................. 5-42
Quick stop............................................................................. 5-43
Quick stop customer setting ...................................... 5-44
Where am I ? ....................................................................... 5-46

04.7.6/Z33-N


EASY MODE CATEGORIESWhen the Expert Mode is canceled, the follow-
ing three categories will be displayed as Easy
Mode.

Home

Street Address

Point of Interest (POI)
INFO:

Use the
Address Book key and the
Point of Interest (POI) key in the same way
as in Expert Mode.Please refer to “Setting with the
Address Book key” on page 5-3 and “Set-
ting with the
Point of Interest (POI) key” on
page 6-2.

If the
Short Menus key is highlighted in
amber in the [SETTINGS] screen, the screen
is in Easy Mode. In this case, the keys
displayed are different from the screen in
Expert Mode.

If you set a destination or waypoints, they will
be displayed with icons.

If you want to go to places close to the stored
locations or facilities, use categories such as
facility, nearby facility or memory for easier
setting.

When using either the Point of Interest (POI)
or nearby Points of Interest categories, the
names called up can be set as the destination
if you do not scroll the screen. If you want to
choose a different place on the screen from
the one called up, you will have to scroll the
screen.
SETTING WITH THE
Address Book
KEYThe Address Book will allow you to store loca-
tions in the memory. This is especially useful for
locations that you visit frequently.
Please refer to “Setting up and editing the
address book” on page 7-2.
INV2316
How do I program a destination?
5-3


04.7.6/Z33-N


1. Press the DEST button.
2. Select the
Address Book key on the [DEST.
SETTING] screen.
The [DEST. SETTING (Address Book)] screen
will be displayed.3. Select the item key of your destination (way-
points) on the [DEST. SETTING (Address
Book)] screen.4. To set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-32.
INV2315
INV2381
INV2382
5-4
How do I program a destination?


04.7.6/Z33-N


5. To slightly alter the destination.
Select the
Map key to display the map
screen of the area around the specified des-
tination (waypoints).6. If necessary, operate the joystick to adjust the
location of the destination (waypoint). Press
the PUSH ENTER button. Select the
Destination key to confirm. The [DEST.
SETTING (Address Book)] screen will be
displayed.
To set the destination (waypoint), refer to
“Making the system guide the route with
detailed options” on page 5-32.
SETTING WITH THE
Previous Dest.
KEYThis system memorizes the last 10destinations
previously chosen, allowing you to set new
destinations or waypoints from them.
INV2383
INV1479
How do I program a destination?
5-5


04.7.6/Z33-N


1. Press the DEST button.
2. Select the
Previous Dest. key on the [DEST.
SETTING] screen.
A total of 10destinations and locations previ-
ously set will be displayed.3. Select the item key of your destination (way-
points) on the [DEST. SETTING (Previous
Dest.)] screen.4. To set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-32.
INV2318
INV2384
INV2385
5-6
How do I program a destination?


04.7.6/Z33-N


5. To slightly alter the destination.
Select the
Map key to display the map
screen of the area around the specified des-
tination (waypoints).6. If necessary, operate the joystick to adjust the
location of the destination (waypoints). Press
the PUSH ENTER button. Select the
Destination key to confirm. The [DEST.
SETTING (Previous Dest.)] screen will be
displayed.
To set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-32.
SETTING WITH THE
Street Address
KEYSets the destination (waypoints) from the street
names and addresses that you enter.
There are two search methods; direct search by
the street names, and search by the street
names after the state/province and/or the city
are defined.
INV2386
INV1484
How do I program a destination?
5-7


04.7.6/Z33-N


1. First press the DEST button.
2. Select the
Street Address key.
Setting with the
List
key
The
List key is used when you know the names
of the destination and waypoints.
1. A keyboard will be displayed on the [DEST.
SETTING (Street Address)] screen. Enter the
street name you want to set.
INFO:
It is not possible to enter names if they are not
stored in the DVD-ROM.2. Enter the street name of your destination.
For example, enter
T , then
U.
3. Enter
U , then select the
List key.
The list screen of street names which begin
with
TU will appear.
INV2319
INV2320
INV2321
5-8
How do I program a destination?


04.7.6/Z33-N


If less than 5 suggested streets remain, they
will be displayed automatically without se-
lecting the
List key.

The city names and street names will be
displayed.

Use the joystick to scroll the display.

When theNext Search key is selected, it is
possible to narrow down cities. To use this
function, refer to “Setting with the
City key” on page 5-12.

When the PREVIOUS button is pressed,
the screen to input street names will be
displayed.4. Select one street of your destination.
5. Enter the house number.
Select the
OK key.
INFO:
It may not be possible to specify a location after
selecting the
OK key. In that case, a list of
locations which correspond to the entered
house number will be displayed.
NOTE:
If a house number is entered and it is not a
“direct hit” for house numbers already
stored in the database, then only a map to
the general vicinity will be displayed.
INV2322
INV2324
How do I program a destination?
5-9


04.7.6/Z33-N