start stop button NISSAN 350Z 2005 Z33 Navigation Manual

Please refer to “GPS information display” on
page 11-17.Quick Stop Customer Settingskey:
Sets the user-defined [Quick Stop] POI (Point
Of Interest).
Please refer to “Quick stop customer settings”
on page 5-44.Set Average Speed for Estimated Journey Timekey:
Please refer to “Setting the average speed” on
page 4-22.Tracking On/Offkey:
You can choose whether to display the path
from the start to the current position.
Please refer to “Displaying the track” on page
11-15.
Easy Mode — when the
Short Menus
key is selectedViewkey:
Same as in Expert Mode.Headingkey:
Same as in Expert Mode.
HOW TO USE THE
DEST
BUTTON
Sets destinations (final destination and way-
points) to search for a route.
This will activate various navigational functions.
WARNING
For safety, some of the functions on the
menu will be disabled while the vehicle
is moving. To use the temporarily dis-
abled functions, park the vehicle in a
safe place and shift to P or N, and set
INV1452
INV2315
How do I operate the NISSAN Navigation System?
4-11


04.7.6/Z33-N


4. The display shows the direction and distance
from the current vehicle position to the se-
lected facility.
Select the facility name you want to set as a
destination (waypoints).5. Set route priorities, then select the
OK key. Route calculation to the destina-
tion will be started.
INFO:
If quick stop is set after the destination was set,
the system starts the route calculation to the
location as the waypoint. Five waypoints can be
registered at the same time.
QUICK STOP CUSTOMER SETTING1. Press the SETTING button.
2. Select the
Navigation key on the [SET-
TINGS] screen.
INV1573
INV1574
INV1466
5-44
How do I program a destination?


04.7.6/Z33-N