Reverse light NISSAN 350Z 2007 Z33 Body, Lock And Security System Workshop Manual

TRUNK LID
BL-113
C
D
E
F
G
H
J
K
L
MA
B
BL
Revision: 2006 November2007 350Z
Removal and Installation of Trunk Lid WeatherstripNIS0002L
REMOVAL
Pull up and remove engagement with body from weatherstrip joint.
CAUTION:
After removal, do not pull strongly on the weatherstrip.
INSTALLATION
Install in the reverse order of removal.
1. Install the weatherstrip from the front with the vehicle center mark aligned to the weatherstrip mark.
2. At rear side, align the weatherstrip seam to the center of the striker.
3. After installing, pull the weatherstrip lightly to check for looseness.
CAUTION:
The weatherstrip should fit tightly onto the corners and trunk lid rear plate.
1. Storage lid 2. Trunk lid assembly 3. Trunk lid weatherstrip
4. Rear bumper fascia
PIIA7604E